Overview

I am unable to use my iPhone 17 Pro as a run destination in Xcode. The device appears at a low level, but CoreDevice / devicectl keeps reporting it as unavailable. Environment • Mac mini (Apple Silicon) • macOS 26.3 (Build 25D125) • iPhone 17 Pro • iOS 26.3 • Xcode 26.3 (Build 17C529) • Xcode 26.4 beta 2 (Build 17E5170d) Symptoms • The iPhone appears in Finder • On the iPhone, I tapped “Trust This Computer” • Developer Mode is enabled • Apple ID is added in Xcode Accounts • Team is configured in Signing & Capabilities • iOS Platform Support is installed • The device still does not become available as a run destination • Devices and Simulators does not show it in a usable state • xcrun devicectl list devices still shows unavailable Output of xcrun devicectl list devices Failed to load provisioning paramter list due to error: Error Domain=com.apple.dt.CoreDeviceError Code=1002 "No provider was found." UserInfo={NSLocalizedDescription=No provider was found.}. devicectl manage create may support a reduced set of arguments. Name Hostname Identifier State Model CAC1B56A-C3B4-59FF-8F9D-659277C7C76C.coredevice.local CAC1B56A-C3B4-59FF-8F9D-659277C7C76C unavailable iPhone18,1 What I already tried • Apple cable • Different USB/Thunderbolt ports • Direct connection to rear ports • Restarted both Mac and iPhone • Restarted Xcode • Ran sudo killall usbmuxd • Ran sudo pkill -9 remoted • Upgraded Xcode from 26.2 to 26.3, then to 26.4 beta 2 • Ran sudo xcode-select -s /Applications/Xcode-beta.app • Ran sudo xcodebuild -runFirstLaunch • Reset “Location & Privacy” on the iPhone, then trusted the Mac again • Still remains unavailable Additional note ioreg shows the iPhone, so the physical USB connection seems to exist. However, at the CoreDevice / devicectl layer the device remains unavailable, and Xcode cannot use it for on-device build/run. Is this a known issue with macOS 26.3 / iOS 26.3 / Xcode 26.4 beta 2? Any workaround or additional debugging steps would be appreciated.

Starting today, we have been seeing this error message. This is a blocker for my team and any help is appreciated Things I've investigated: Testflight Apple status page is green Our signing certificate is valid/ unexpired Provisioning profile is valid/ unexpired There are no pending Apple account agreements Doesn't seem to matter if user also is a member of my company's Apple Business Manager developer team Cellular data is turned off Date/ time is correct User was unable to install app using a personal gmail account and unregistered device User was able to use Testflight to install a third-party app outside of our corporate account Uninstalling/ reinstalling Testflight didn't help

Hello, I created an app using the latest version of Xcode (16.2), and I'm having a problem testing this app on my iPhones. I created this app just like all the others I've made for my clients, including one on (03/24/25), but when I went to upload another App to App Store Connect on (03/26/25) I couldn't test it on my phone. Points to consider: The app runs perfectly on the Emulator. All my terms and agreements with Apple are up to date. I tried to download the apps through Testflight on 2 different devices, iPhone 7 Plus (iOS 15.8.1) and iPhone 15 Pro Max (iOS 18.3.2), and I was unsuccessful in neither attempt. I can send my app to the internal testers, but when I click download, the following message appears: Could not install [APP NAME]. The requested App is not available or doesn't exist. I imagine this problem is with Apple itself, I have already contacted support, but I need to resolve this urgently for my customers. Has anyone experienced this and resolved it?

Claude Agent OAuth token silently expires and fails to refresh in Xcode 26.4 — requires manual re-auth every 12-24 hours. this was not happening in 26.3, its a regression in 26.4 Details and sysdiagnose submitted: FB22421882

I had already accepted my Apple Developer Program License Agreement since the 20th of march 2026. But your banner stay in my business portal and say : "Le contrat de licence de l’Apple Developer Program a été mis à jour et doit être revu. Afin de pouvoir mettre à jour vos apps existantes et en soumettre de nouvelles, la personne titulaire du compte doit revoir et accepter le contrat mis à jour en se connectant à son compte." Please see if you don't have a bug and let me update my apps.

I've been running into lots of issues since I upgraded to 26.5 beta, spotlight doesn't work, mail index was broken and after deleting it I can't reindex my mail., after a while I get an error that reindexing failed and that I should relaunch that app and it will start over. It never succeeds Looking into the console, it seems that at least the mail issue, but also others system logging errors (trustd, coreduetd) are linked to corrupted sqlite databases. So I guess the sqlite version is a dud ?

I've looked around quite a bit at the EventKit documentation and done all the searching I could think of, as well as examining the EKCalendar and EKEventStore types. Trying to find out how to view, modify, and create groups of reminders lists.

In my turn-based game, I receive GKListener event receivedTurnEventForMatch and decode the match.matchData. On occasion, the matchData is clearly stale and is from the previous turn. If I call the MatchMaker ViewController up and select that same match, the data is not stale, so it's not a matter of not calling endTurn. I have tried both loadMatchWithID and loadMatchesWithCompletionHandler after receiving the receivedTurnEventForMatch, but the data is still stale. Advice?

Mac Pro 2019, Tahoe 26.3, Xcode 26.2 Mac Mini 2023 M2, Tahoe 26.3, Xcode 26.2 On Mac Pro 2019 the app is only Intel while on Mac Mini 2023 M2 it is ARM64 only. Both have Standard Architectures (Apple Silicon, Intel). Both have Build Active Architecture Only is set to No (Debug + Release). Happen for default new projet macOS -> App and Obj-C, Xib. No change to defaults setting except uncheck "Automaticaly manage signing" and "Signing Certificate" set to "Sign to Run Locally" HOWEVER On Mac Pro 2019, BigSur 11.7.10, Xcode 14.10 the application is build Universal ! Why cannot build universal with Tahoe 26.3, Xcode 26.2 ? Can I submit a Mac applcation to App Store Connect with BigSur 11.7.10, Xcode 14.10 ? What are the minimal version of Mac Os and Xcode to submit a Mac applcation to App Store Connect ?

I am trying to provide my clients with subscribable calendar link so they can see their schedules from an App I have. I've got the basics working on building out the various fields for the VEVENT, however no matter what I have tried the LOCATION is always showing up as a text and not a location within Apple Maps that I can have them click on from the event. Any idea what the best way to go about this would be, and feeding the ICS an address, Apple Maps URL, GPS coordinates either in the location, Geo or the X-APPLE-STRUCTURED-LOCATION or combinations haven't been working. I am using/hosting on Google Scripts.

All my business documents are in an active state, including the Part XX of the Income Tax Act (necessary for Canadians), but app.store connect won't let me bundle subcriptions or in-store payements with my app or let me submit it b/c is says I'm not in compliance. It's incredibly frustrating b/c it must be an internal error. anyone else having this issue?

Good morning, I assume that coredata model changes are automatically created on the development cloudkit (CD_*) as that has been the behaviour in the past and than you deploy the schema changes to prod. I have a case were a new field in a existing table is not appearing in the dev cloudkit table is there a way to "force" it to show up? thanks in advance

Re. APP ID 6758894172 This app was submitted on February 16, and since then it has been showing as waiting for review. I have contacted the support email multiple times as well as requesting the review to be expedited, but no response and no change in app status. Could you please investigate this matter and let me know what the issue is?

Hello! I'm new to xcode and am developing an iOS app. I hit the following error when build my app: MY_SHA no identity found Command CodeSign failed with a nonzero exit code I have generated my certificate through xcode. I can see the Certificate and the private key in Keychain -> login. But it's not that private key is under the Certificate. They are listed in parallel. The certificate appears in Certificate tab but not in My Certificate Tab. Would that matter? security find-certificate -a -Z | grep -A1 "Apple Development" Gives me the certificate. But security find-identity -v -p codesigning give 0 valid identity found. Could you help me figure out what could be the reason for this? I've been stuck for several days now. Thank you so much!

Hi everyone, I’m running into a frustrating issue with the Apple Developer Program and would really appreciate any advice. I was charged $99 USD for the membership and received the confirmation email saying it would be processed within 2 business days. However, I still don’t have access to the membership, and nothing has been activated on my account. What makes it worse — I’ve already tried contacting Apple support multiple times via email, but I haven’t received any response at all. So right now I’m stuck: payment went through, but no membership and no support response. Has anyone faced this before? Did your membership eventually activate on its own? Is there any way to actually reach Apple support (chat, phone, anything that works)? Should I escalate this somehow or request a refund through my bank? Any advice would really help — I feel like I’m just shouting into the void at this point. Thanks 🙏

We've been notarizing apps for a while now and have been through agreement changes before. But we still keep getting the following error when trying to notarize: Conducting pre-submission checks for myapp.dmg and initiating connection to the Apple notary service... Error: HTTP status code: 403. A required agreement is missing or has expired. This request requires an in-effect agreement that has not been signed or has expired. Ensure your team has signed the necessary legal agreements and that they are not expired. We've been through every document in our account to ensure it is signed. Is there any way to determine what document is not signed or what our issue is ? ...thanks

Hello, My app “DeepTone” has been fully approved and is marked as Ready for Distribution in App Store Connect. However, the app is not available in EU countries due to Digital Services Act (DSA) compliance still showing “In Review”. details: DSA verification was submitted and confirmed as completed by Apple Developer Support (case ID available). App Review has already approved the app. The app is currently live in non-EU regions but blocked in the EU. App Store Connect still shows: Digital Services Act (DSA) compliance – In Review Encryption Self-Declaration (France) – In Review This appears to be a backend compliance status issue rather than an app review issue. Has anyone experienced a similar situation where DSA compliance remained “In Review” after approval? Is there a known escalation path or expected resolution timeframe for this? Thank you for any guidance.

Summary I am unable to link my In-App Purchases and Subscriptions to my app version in App Store Connect. The "In-App Purchases and Subscriptions" section described in Apple's documentation is not visible on my version preparation page, making it impossible to associate IAPs with my build before submission. Steps to Reproduce Open App Store Connect → My Apps → [App Name] Navigate to the app version in "Prepare for Submission" state Scroll through the entire version page The "In-App Purchases and Subscriptions" section is not present anywhere on the page Expected Behavior According to Apple's documentation and the note shown on the Subscriptions page itself: ▎ "Your first subscription must be submitted with a new app version. Create your subscription, then select it in the 'In-App Purchases or Subscriptions' section of the app's version page before submitting the version for review." The section should be visible and allow me to select my configured subscriptions. Actual Behavior The section does not appear on the version page at all. My subscriptions (monthly, yearly, lifetime) are all in "Ready to Submit" state and correctly configured, but there is no way to link them to the build. Account & Contracts Status All prerequisites are in place: All contracts (Paid Apps Agreement) are signed and active — nothing pending under "Business" / "Agreements, Tax, and Banking" Banking and tax information is fully set up No open items or warnings under the Business section in App Store Connect Despite all account requirements being fulfilled, the IAP linking section remains absent from the version page. Impact This is blocking my app from being approved. Apple's reviewer rejected my submission with Guideline 2.1(a) stating the subscription screen showed no available plans. The reviewer cannot see the IAPs because they were never linked to the version — which I cannot do due to this missing UI section. Environment App Store Connect via browser (Safari + Chrome, both tested) App status: "Prepare for Submission" IAP status: All three products "Ready to Submit" First-time submission (new app, never been approved before) Workaround None found. This appears to be a UI bug in the current version of App Store Connect. Has anyone else encountered this? Is there a way to link IAPs to a build via the API or any other workaround?

Since 26.4 beta 3 I've been having errors after a few hours of using Claude Agent. I get an error stating that I am not authed. If I go into Xcode settings, it still shows I am signed into Claude Agent. I have click sign out and then go through the whole auth process again to start using the agent again. This is on two separate computers. Is there anything I can do to stop this behaviour and stay logged in for longer? It worked fine in 26.3.

When tryin to create a new app, I keep getting the error saying I need to accept the new Apple Developer Program License Agreement, which I did over 12 hours ago now. I even have the email showing that it has been accepted. Why am I still seeing this? Also, I just left my old company's team on App Store Connect and now when I login to Apple Developer it's only showing their account, not my personal account. This is frustrating/sad how terrible this flow is.