Hi, My enrollment has been "Pending" for 3 business days after submitting the requested documents. Details: Country: Peru Entity: Individual Subscription paid: April 22, 2026 (PEN 389.90, confirmation received) Documents submitted and acknowledged on April 22 with a "follow-up within two business days" message Today (April 25): account still shows "Pendiente" with a prompt to pay again, even though payment is active I have an open Case ID with Apple Developer Support and can share it privately if a moderator needs to reference it. Is this delay normal right now? Posting here in case anyone has guidance or has experienced this recently. Thanks!

I need help deleting my developer account. Whenever I try to contact developer support I receive the following error: Application error: a client-side exception has occurred while loading aninterestingwebsite.com I think I am receiving this error as I cannot update my country or phone number. My one and only phone number is already associated with my personal apple account. Apple developer support, please contact me. All I want to do is delete the developer account.

Hi all, I'm submitting a Developer ID-signed, hardened-runtime app for notarization. Every submission returns: "statusCode: 7000 statusSummary: Team is not yet configured for notarization. Please contact Developer Programs Support..." Team ID: V67NRZ84A2. Apple Developer membership is active, Developer ID Application certificate is valid, signing/verification all clean. Already opened a support case last week via the recommended path. The "contact page" on the developer site said Apple usually responds within 2 business days.... Has anyone hit this and gotten it resolved? How long did it take, and was there a more effective channel than the standard support form? I've seen people on Reddit claim they've actually been able to call a Developer phone line, but I haven't seen a valid phone number anywhere. I appreciate your response!

Some mobile phones frequently report an error "bad URL" with the domain set to NSURLErrorDomain and the code set to -1000. However, I never encounter this error, and I'm not sure what's going wrong，The error log is as follows: HttpInterceptor:81 didReceive(_:target:): moya error: underlying(Alamofire.AFError.sessionTaskFailed(error: Error Domain=NSURLErrorDomain Code=-1000 "bad URL" UserInfo={_kCFStreamErrorCodeKey=22, NSUnderlyingError=0x1119f91d0 {Error Domain=kCFErrorDomainCFNetwork Code=-1000 "(null)" UserInfo={_NSURLErrorNWPathKey=satisfied (Path is satisfied), interface: utun4[endc_sub6], ipv4, dns, uses cell, LQM: unknown, _kCFStreamErrorCodeKey=22, _kCFStreamErrorDomainKey=1}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <7FF86D00-1379-43D4-9F9B-0C300AEC57C8>.<4>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <7FF86D00-1379-43D4-9F9B-0C300AEC57C8>.<4>" ), NSLocalizedDescription=bad URL, NSErrorFailingURLStringKey=https://update.flashforge.com/api/updates/check?app_id=46&entity_id=9E8D3B0C-2E61-46AF-91B9-B4AFFACF2788&platform=23&version=v1.3.4, NSErrorFailingURLKey=https://update.flashforge.com/api/updates/check?app_id=46&entity_id=9E8D3B0C-2E61-46AF-91B9-B4AFFACF2788&platform=23&version=v1.3.4, _kCFStreamErrorDomainKey=1}), nil)

Good morning. I have an APPLE DEVELOPER ACCOUNT. I am inquiring about Distributing In House Apps using my own website. All the links so far do not help. They all seem to be relevant to the Apple Store and not In House apps. I have my apps ready for evaluation. I understand you need to evaluate them. I want to apply for a certificate that will allow me to put the apps on my OWN website and have users download these and install to their Apple devices. So far I have been testing using own devices but every build I create does NOT create a manifest file. They do work but obviously I need a manifest for the website. I assume a relevant certificate would provide that. Can you please let me know of any and all information that applies on how to apply for an In House Distribution Certificate and how and where I should upload my apps for evaluation. Thank you so much. John

I am running Tahoe 26.4.1 on a MacBook Air, M4, 2025. In System Settings, I have an item heading of Software Update Available. Clicking on that brings up "Command Line Tools for Xcode 26.4". The only available choices are to Update Now or Cancel. In the past, I was developing a game, but have quit working on that, and deleted Xcode and Command Line Tools. Wanting the "Command Line Tools ..." line to disappear from System Settings, I called Apple Support, and at their request have followed the steps in "https://aninterestingwebsite.com/documentation/xcode/installing-the-command-line-tools" to delete this entry in System Settings, namely the 2 sudo's in that article under the section "Uninstall the command line tools". This did not cause the "Command Line Tools for Xcode 26.4" line in System Settings to disappear (as I was told by Apple support that it would, because I would be deleting the receipt). In Terminal, I did indeed receive a response of "No receipt for 'com.apple.dt.commandlinetools' found at '/'.". I have called developer support, but the individual I spoke with had no useful guidance on how to finish this issue, except to post to the Forum. I would appreciate any guidance on how to delete the "Command Line Tools ..." entry from System Settings.

Device: iPhone 13 OS Version: iOS 26.4, iOS 26.5 Summary: The Settings app crashes when accessing the Sandbox account management screen in Developer Settings while the device is offline. Steps to Reproduce: Enable Developer Mode on the device Disconnect from the internet (Wi-Fi and cellular off) Go to Settings → Developer Ensure a Sandbox account is signed in Tap on "Sandbox" Tap on "Manage" Expected Result: The system should either: Open the Sandbox management screen, or Show an error indicating no internet connection Actual Result: The Settings app crashes immediately after tapping "Manage". Reproducibility: Always (100%) when offline Additional Notes: Issue observed on iOS 26.4 and iOS 26.5 Does not occur on iOS 18 May also be present in other iOS 26.x versions Does not occur when the device has an active internet connection

Summary After replacing every PNG in AppIcon.appiconset with the correct branded heart icon, the installed iOS app on a real iPhone (built and deployed via Xcode, not TestFlight web clip) still displays the default Capacitor 'blue X' placeholder icon on the home screen. The icon files in the repo are confirmed to be the new artwork, but iOS shows the old placeholder. Environment App: ImpulseAlly (Capacitor wrapper around hosted TanStack Start web app) Bundle ID: com.impulseally.app Capacitor iOS, deployment target iOS 15.0 Xcode 17E202, iOS SDK 26.4 (per derived-data log) Install method: Xcode → Run on physical device (not Safari 'Add to Home Screen', not TestFlight) Web shell URL: https://impulseally.com (server.url in capacitor.config.ts) What the user sees On the iPhone home screen, the app icon is the default Capacitor placeholder — a stylized blue 'X' / Capacitor logo on a white background. The expected icon is a sage-green rounded square with a white heart. Please ask for more information if I have not provided what you need. I have a file that I can share with everything I've tried.

The assets in the Asset.xcasset lesser than the asset in the Assets.car file. Because of this the iPA file size increased three times as Assets.car file inside the iPA increased. Why do the asset file size increased enormously. How do we prevent this ? I used Version 26.2 (17C52).

We're experiencing an issue where the CarPlay Simulator (from Apple Developer Additional Tools) stopped connecting to our iPhones as of March 4th, 2025. The simulator gets stuck indefinitely on "Connecting to phone" and never completes the pairing. Environment App: Oracle Field Service iOS app (with CarPlay support) Tool: CarPlay Simulator from Apple Developer Additional Tools (aninterestingwebsite.com/download/all/) Issue start date: Wednesday, March 4th, 2025 Tested on: Multiple Mac machines, multiple iPhones Multiple CarPlay Simulator versions tested What's happening The CarPlay Simulator launches but displays "Connecting to phone" indefinitely. It was working correctly prior to March 4th with no changes on our end. What still works CarPlay functions correctly when the same iPhone is connected to a real car, confirming the issue is specific to the simulator. Troubleshooting steps already attempted Reset permissions and re-added the simulator Forgot the simulator and re-paired it Changed the USB cable Tested on multiple Mac machines Tested on multiple iPhones Tried multiple versions of the CarPlay Simulator Confirmed no VPN is in use Confirmed with IT, no OS updates or enterprise restrictions were applied Questions Has anyone else experienced this since March 4th? Was there a change in CarPlay Simulator behavior or a requirement on the Apple side (certificate, entitlement, protocol) around that date? Is there a known workaround or fix?

Hi. On my iOS app, both the app store and the device are making changes to my app icon to make it look more Liquid-Glass. See attached image showing my original icon, and then how it appears on the app store and on devices. There is an added bevel/3d effect. I'd like to not have this happen. Did anybody figure out how to turn this off? So that the icon appears as submitted. I've played around with Icon Composer a bit but haven't managed to turn this off there. And would prefer to just submit the png's. Thank you!

Hello, I made my app icon with Icon Composer and added the .icon file directly to my Xcode project. I noticed that the icon preview in Icon Composer looks one way, while the icon shown on the App Store looks different. Details: I am using the .icon file directly in the project I am not using an exported PNG for the app icon I did not add a separate background image The background was set with fill in Icon Composer The preview in Icon Composer looks as expected The App Store version has a different appearance I would like to ask whether this difference may come from: App Store processing caching or a recommended Icon Composer setup for background fill If anyone has seen something similar, I would appreciate any guidance. I can also share screenshots of the Icon Composer preview and the App Store result.

When a static library is built with Xcode 26 (with deployment target set to iOS 13) and then linked into an app project compiled with Xcode 16, the build process fails with the following linker error: Undefined symbols for architecture arm64: "_swift_coroFrameAlloc" This occurs even though both the static library and the app project have their deployment targets set to iOS 13.0. The static library works on Xcode 26, but fails to link on Xcode 16. This issue shows up with certain Swift syntax. For example, in my case, using a property getter and setter caused the compiler to emit a reference to _swift_coroFrameAlloc, which in turn triggered the issue. This issue prevents us from distributing pre-built static libraries compiled with Xcode 26 to teammates who are still using Xcode 16. I’ve filed feedback for this issue (FB21130604). Is there any way to work around it? For example, by adding specific Build Settings or something similar? A demo project is available here: https://github.com/Naituw/SwiftLibraryDeploymentTargetIssue The demo project includes: StaticLibraryProject: A simple Swift static library with property getter setter usage AppProject: An iOS app that links against the static library verify_compatibility.sh: An automated script to reproduce the issue Method 1: Manual Build and Verification Open StaticLibraryProject/StaticLibraryProject.xcodeproj in Xcode 26 Build the StaticLibraryProject for iOS device (Release configuration) Locate the built libStaticLibraryProject.a in the build products directory Copy libStaticLibraryProject.a to AppProject/AppProject/ directory Open AppProject/AppProject.xcodeproj in Xcode 16 Build the AppProject for iOS device Method 2: Automated Script Edit verify_compatibility.sh to configure the paths to your Xcode installations: Set XCODE_26_PATH to your Xcode 26 installation path (e.g., /Applications/Xcode.app) Set XCODE_16_PATH to your Xcode 16 installation path (e.g., /Applications/Xcode16.app) Run the script: ./verify_compatibility.sh

Hi everyone, I’m currently researching Apple Watch pairing behavior and diagnostic logging across different setup modes. I can reliably trigger a co-sysdiagnose on an Apple Watch when it is paired in a normal standalone / standard configuration. In that case, the expected co-sysdiagnose archive appears on the paired iPhone. However, in a Family Setup / managed account scenario, behavior is different: The watch provides the expected haptic feedback after the sysdiagnose button combination But no co-sysdiagnose archive appears on the paired iPhone afterward The same hardware behaves differently depending on pairing/account configuration My question is: Is co-sysdiagnose collection, transport, or availability intentionally different for Family Setup / managed Apple Watch devices? For example: Are logs stored elsewhere? Is transfer to the organizer iPhone restricted? Is co-sysdiagnose unsupported in Family Setup mode? Are additional conditions required, such as Wi-Fi, charging state, unlocked devices, or a longer delay? I may be missing something obvious, but I have not found documentation describing this difference. If this is expected behavior, I’d really appreciate a pointer to the relevant documentation. Thanks a lot!

mac mini xcode 26.4, but the simulator version is 16. how can i update the simulator to version 26?

I have an iPhone 14 running iOS 16.1 and my series 5 watch running watchOS 9.1. I was able to turn on Developer Mode on the phone by going to Settings--> Privacy & Security --> Developer Mode. On the watch however (I'm doing this directly on the watch and not on the watch app on the phone) once I'm in Privacy & Security, there is no option to select Developer Mode. How do I get my watch in Developer Mode in order to get a successful build in xCode?

This is not exactly a feedback about the forums but I couldn't find a better location to ask this question. The macos release notes are hosted at aninterestingwebsite.com. For example, the macos 26.4 release note is here https://aninterestingwebsite.com/documentation/macos-release-notes/macos-26_4-release-notes. Would it be possible to include the release date in those release notes? Right now, it's hard to locate that information. It would also be useful to even include the sw_vers of that particular release in those release notes. For example: ProductName: macOS ProductVersion: 26.4 BuildVersion: 25E246 Having the sw_vers and the release date in the first few lines of the release note would be handy. The reason I went looking for the release date was because the corresponding sources for macos 26.4 hasn't yet been listed at https://opensource.apple.com/releases/. It usually takes a few days for that to happen, so I wanted to see how long it has been since 26.4 was released.

Hello, I am facing a critical issue where the Family Controls (Distribution) entitlement is not being applied to my app extensions, despite the main app ID being approved. Main App ID: com.hayashikento.focuspact (Approved on March 13) Extension ID 1: com.hayashikento.focuspact.ShieldActionExtension (Pending/Not visible) Extension ID 2: com.hayashikento.focuspact.ShieldConfigurationExtension (Pending/Not visible) I have submitted requests multiple times, but the entitlement does not appear in the "Capability Requests" for these extensions in the Certificates, Identifiers & Profiles portal. Furthermore, I am unable to contact Developer Support because the "Contact Us" form on the developer website consistently shows a "Request error" or freezes on the submission page. Since I am completely blocked from TestFlight distribution, could someone from Apple please look into my account (Team ID: UHG4J7F7NH) and manually sync these entitlements? Thank you for your help.

Hi, We are trying to integrate Metric Kit into our MacOS Application. Our application is a background process. We are interested in getting CPU and Memory metrics for our process. MXMetricPayload is the one we are looking at. We tried to integrate metric Kit and left the background app for 24 hours, we did not get any callback. So, does metric kit work for background app in MacOS? Also does it for Network Extension?

Hello there everyone. I've got numerous support projects using old school development. Things from Objective-C to RxSwift and UIKit. I've tried the LLM/Agents and they just destroy the codebase over time, so I have given up. The final straw was trying to get it to fix a POSTCODE validation issue which was using some novel ways to provide validation in place using RxSwift. Has anyone had any luck with these LLMs on Legacy codebases? Would love to hear tips.