When I use Xcode to develop the apps, the connection to my own Apple Watch is failed. The simulator has been downloaded, but it still displayed"watchOS10.0 Not Installed". The developer options were opened, I click the"trust this computer" but it always display"Connecting to *** Apple Watch". My iPhone can be connected normally.

Hello We use Datadog Mobile Vitals in our app and I'm trying to run some tools in Instruments for comparison. I'm not sure what tool should I use for some of those metrics: Slow Renders Description: With slow renders data, you can monitor which views are taking longer than 16ms or 60Hz to render. Instruments equivalent: Hangs including microhangs (?) CPU ticks per second Description: RUM tracks CPU ticks per second for each view and the CPU utilization over the course of a session. The recommended range is <40 for good and <80 for moderate. Instruments equivalent: CPU Profiler (?) Frozen Frames - Description: Frames that take longer than 700ms to render appear as stuck and unresponsive in your application. These are classified as frozen frames. Instruments equivalent: Hangs with > 500ms (?) Memory Utilization Description: The amount of physical memory used by your application in bytes for each view, over the course of a session. The recommended range is <200MB for good and <400MB for moderate. Instruments equivalent: Allocation (?)

The app stops on the breakpoint when "All Runtime Issues" is added. If I disable the breakpoint, the app runs normally. Is there a new project setting to avoid this breakpoint from being set. It does not appear to be a valid error. I am running Xcode 16.2. I edited the "Type" field in the breakpoint box. This occurs with the "System Frameworks" option only.

I am using XCode16 and macOS 14.7.2. Previously, using the instruments on an iPhone with iOS 14.3 was normal, but when I upgraded to iOS 18, the instruments often couldn't find the library. I have to restart the instruments to restore normal operation, but the problem will occur again after using it for a period of time

Running macOS 15.4.1, Simulator 16.0 (1042.1), various iOS devices (iPhone 16, iPad 13" M4) I log into iCloud and enable iCloud Drive. Running the Files app, I noticed that I can click on "flat" documents (PDF, JPEG, etc) and they work. However, when I click on "package" documents (e.g. represented by a directory behind the scenes), I get a normal download progress, but then an alert "The operation could not be completed. No such file or directory". This seems to happen with all package documents, e.g. Keynote documents or Reality Composer objcap documents. It does not happen on actual devices logged into the same account. I've tried completely deleting and rebuilding the simulator instances in question, with no success.

Hi, I am getting an error stating "Argument passed to call that takes no arguments". I want this Apple Watch App to measure and store RR Intervals from the PPG sensor on the Apple Watch for Heart Rate Variability calculations. Please help me fix this, I can't figure it out. Here is my code: heartbeatQuery = HKHeartbeatSeriesQuery(predicate: predicate, dataReceivedHandler: { (query, timeSinceLastBeat, ended, error) in // Switch to main thread for UI updates DispatchQueue.main.async { if let error = error { print("Heartbeat query error: (error.localizedDescription)") self.fetchErrorMessage = "Heartbeat query error: (error.localizedDescription)" // Consider stopping the workout session if the query fails critically // self.stopWorkoutSession() return } if ended { print("Heartbeat query indicates series ended.") } // Append valid RR intervals if timeSinceLastBeat > 0 { self.rrIntervals.append(timeSinceLastBeat) self.beatCount += 1 } } // End DispatchQueue.main.async }) // End query data handler // --- END OF PROBLEMATIC INITIALIZER --- // Execute the query if it was created successfully It recommends the fix as removing this part: '(predicate: predicate, dataReceivedHandler: { (query, timeSinceLastBeat, ended, error) in // Switch to main thread for UI updates DispatchQueue.main.async { if let error = error { print("Heartbeat query error: (error.localizedDescription)") self.fetchErrorMessage = "Heartbeat query error: (error.localizedDescription)" // Consider stopping the workout session if the query fails critically // self.stopWorkoutSession() return } if ended { print("Heartbeat query indicates series ended.") } // Append valid RR intervals if timeSinceLastBeat > 0 { self.rrIntervals.append(timeSinceLastBeat) self.beatCount += 1 } } // End DispatchQueue.main.async })' But after I remove that it says "Cannot assign value of type 'HKHeartbeatSeriesQuery.Type' to type 'HKHeartbeatSeriesQuery'" PLEASE HELP ME Thanks

I have an iOS app, and I am trying to add a companion WatchOS app. My iOS app depends on 2 libraries: GoogleMobileAds FirebaseAnalyticsWithoutAdIdSupport When I add a new target for WatchOS, the preview build starts to fail. I am not adding any libraries to WatchOS. The Google Ads and Firebase Analytics libs are only under the iOS target. I am unable to run the preview, I get an error when trying to build the watch scheme. The preview does not work. The build just crashes. I've included the error log below. But, here are the steps I've tried so far: Delete folders inside Derived Data Run a clean build (Cmd + Option + Shift + K) Delete scheme and create a new one Reset Package Cache Restart Xcode Restart Macbook But, it just does not work. I do not understand why the watchOS target is erroring for "GoogleUserMessagingPlatform" and "GoogleMobileAdsTarget" when those packages are not linked/used for the watchOS. SchemeBuildError: Failed to build the scheme “timerWatch Watch App” While building for watchOS Simulator, no library for this platform was found in '/Users/k/Library/Developer/Xcode/DerivedData/timer-dhkdhvfcqtfgskfdxpmupujswtuh/SourcePackages/artifacts/swift-package-manager-google-user-messaging-platform/UserMessagingPlatform/UserMessagingPlatform.xcframework'. (in target 'UserMessagingPlatformTarget' from project 'GoogleUserMessagingPlatform') Build target UserMessagingPlatformTarget: /Users/k/Library/Developer/Xcode/DerivedData/timer-dhkdhvfcqtfgskfdxpmupujswtuh/SourcePackages/artifacts/swift-package-manager-google-user-messaging-platform/UserMessagingPlatform/UserMessagingPlatform.xcframework:1:1: error: While building for watchOS Simulator, no library for this platform was found in '/Users/k/Library/Developer/Xcode/DerivedData/timer-dhkdhvfcqtfgskfdxpmupujswtuh/SourcePackages/artifacts/swift-package-manager-google-user-messaging-platform/UserMessagingPlatform/UserMessagingPlatform.xcframework'. (in target 'UserMessagingPlatformTarget' from project 'GoogleUserMessagingPlatform') Build target GoogleMobileAdsTarget: /Users/k/Library/Developer/Xcode/DerivedData/timer-dhkdhvfcqtfgskfdxpmupujswtuh/SourcePackages/artifacts/swift-package-manager-google-mobile-ads/GoogleMobileAds/GoogleMobileAds.xcframework:1:1: error: While building for watchOS Simulator, no library for this platform was found in '/Users/k/Library/Developer/Xcode/DerivedData/timer-dhkdhvfcqtfgskfdxpmupujswtuh/SourcePackages/artifacts/swift-package-manager-google-mobile-ads/GoogleMobileAds/GoogleMobileAds.xcframework'. (in target 'GoogleMobileAdsTarget' from project 'GoogleMobileAds')

Xcode 16.2 archive fails to compile XIB Xcode Archive command fails most of the time while compiling an XIB which was created in older Xcode. XIB was updated in Xcode 16.2 version also which did not fix this issue. Archive from Xcode app works but Xcode build command fails and no reason shown by the command. ** ARCHIVE FAILED ** The following build commands failed: CompileXIB /Users…/Resources/Nibs/<XIB_NAME>.xib

Hello All I'm encountering an issue with Keychain access in iOS simulators after reinstalling Xcode. My app successfully accesses the Keychain on physical devices, but simulators consistently fail with errors. Details: App uses Keychain to store API keys Works perfectly on physical devices After Xcode reinstall, simulator Keychain access fails Error logs show "Keychain retrieve failed for key with status: -25300" I've properly configured Keychain Sharing entitlements My entitlements file includes: $(AppIdentifierPrefix)******* What I've tried: Resetting simulators Deleting simulator Keychain databases manually Adding Keychain Sharing capability Ensuring entitlements are correct My app worked fine with simulators before reinstalling Xcode, which suggests something changed in the development environment rather than my code. Has anyone encountered similar issues? Is there a recommended approach for handling Keychain access in simulators that's more resilient to Xcode environment changes? Thanks for your help!

My app has a Watch app companion, and a Widget. are this settings correct to distribute these to TestFlight and Apple Store ?

Hi, I’m currently developing a watchOS app and ran into an issue where I can’t enable Developer Mode on my Apple Watch. Device info: Apple Watch Series 9 (watchOS 10.4) Paired with iPhone 14 Pro (iOS 17.4.1) Xcode 15.3 (macOS 15.5, Apple Silicon) Issue: When I try to run the app on my physical watch device, Xcode prompts that Developer Mode needs to be enabled. However, there is no approval request on the Apple Watch, and no Developer Mode option appears under Settings → Privacy &amp; Security. I’ve already tried the following: Rebooting both devices Unpairing and re-pairing the watch Erasing and setting up the watch again Signing out and back into my Apple ID Using the latest Xcode version (15.3 and 16.3 both tested) Running clean builds and checking provisioning profiles Attempting install via both simulator and physical device Still no luck — the app will not launch on the Apple Watch due to Developer Mode being disabled, and the option is missing entirely from Settings. I visited an Apple Store Genius Bar, but they couldn’t help and told me to contact Developer Support. I’ve already submitted a support request, but in the meantime I wanted to ask here in case anyone else has experienced this and found a workaround. Thanks in advance.

When I execute: geoCoder.reverseGeocodeLocation(location, completionHandler:{[weak self](placemarks, error) in print("reverse geocoding location after altitude: ",location.altitude) print("placemark location first", placemarks?.first?.location?.altitude ?? -1) The input CLLocation has correct altitude 25, instead the location in the output placemarks have altitude 0, when of course they should have the same location. Moreover it is impossible to retrofit any data in the returned placemarks as they are portrayed as a read only property.

The WatchOS developer is not allowed to obtain healthKit permission status. The result is always unauthorized (either by clicking the dot/cross in the upper left corner or by turning on all Health, on some, off all). WatchOS 开发获取 healthKit 的权限状态authorizationStatus不准。结果始终都是未授权（无论是点击左上角的点叉号还是开启全部健康项开关，开启部分，关闭所有），怎么处理？

I have a swift project with a Watch companion. Since the update of Xcode in 16.3 version after updating MAcOs , Watch OS, iOS to the latest version . It is quasi impossible for me to make Xcode work with my series 10 Watch. I have a lot of alert box, messages in the "device & Simulator" tool like this Previous preparation error: A connection to this device could not be established.; Timed out while attempting to establish tunnel using negotiated network parameters. And many message telling me that Xcode is preparing the Watch , then that it has lost the connexion. I have to wait some minutes after EACH run of the App to test it again. This is very annoying . Some of the alerts I have : And the best to know , is that I can run the APP outside of Xcode , it works, Connects to the iPhone, fetch data and so. the iPhone sees the Watch without and problem. Reboots can solve for a few minutes the problem. But that is not a solution.

In many cases I’ll be talking to folks with a memory management problem and I’ll say “You should investigate this with the standard memory debugging tools.” They then turn around and ask me “What are those tools?” Well, this is what I mean: Zombies — This lets you quickly detect when an object is used after it’s been deallocated. Learn more about it in the Finding zombies section of the Instruments Help and in Investigating crashes for zombie objects. There was also an excellent WWDC video about this, namely, WWDC 2010 Session 311 Advanced Memory Analysis with Instruments. This is no longer available in the video archive but if you can find a copy it’s well worth a watch. Address Sanitizer — This is a lower-level tool that finds a variety of common memory management issues, including use after free and buffer overruns. Learn more about this in Diagnosing memory, thread, and crash issues early and the various articles it links to. There’s also a good discussion of this tool, and other Xcode runtime diagnostic tools, in WWDC 2017 Session 406 Finding Bugs Using Xcode Runtime Tools (also no longer available from Apple). Hardware memory tagging — If you have access to a device with hardware memory tagging — starting with the A19 or M5 processors — consider enabling Memory Integrity Enforcement (MIE). For the details, see Enabling enhanced security for your app or watch Secure your app with Memory Integrity Enforcement. Even if you don’t want to do that for your production app, enable it just for development by checking Hardware Memory Tagging in the Options tab of Xcode’s scheme editor. Older tools — There are a variety of older tools that might be useful in some specific circumstances. See the Enabling the Malloc Debugging Features section of the Memory Usage Performance Guidelines for more information about these. Of specific interest is libgmalloc, which is documented in a UNIX man page. For some practical examples of how to identity a memory management crash report and then investigate that crash with these tools, take a look at WWDC 2018 Session 414 Understanding Crashes and Crash Logs. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History: 2026-03-02 Added a discussion of hardware memory tagging. 2023-05-09 Added a link to Investigating crashes for zombie objects. 2023-03-22 Removed another WWDC session video link. Made minor editorial changes. 2020-10-23 Fixed some formatting errors. 2019-10-30 Removed the link to WWDC 2010 Session 311 Advanced Memory Analysis with Instruments because it’s not long available in the archive. Refreshed all the other links. 2019-01-22 Fixed the link to libgmalloc. 2018-11-02 Updated to include a reference to WWDC 2018 Session 414 Understanding Crashes and Crash Logs. 2017-11-16 First posted.

with the latest Xcode version, i am getting all kinds of errors: few main ones: /Users/akashbhatia/MyApp/ios/Pods/Target Support Files/ReactCodegen/ReactCodegen-prefix.pch:2:9 Could not build module 'UIKit' /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator18.4.sdk/System/Library/Frameworks/CFNetwork.framework/Headers/CFNetwork.h:18:10 Could not build module 'CoreFoundation' /Users/akashbhatia/MyApp/ios/Pods/Headers/Public/RCT-Folly/folly/portability/Config.h:20:10 'folly/folly-config.h' file not found I have reinstalled Xcode, removed derived data, installed pod over and over again, but I have realized from the first error here, that it has more to do with Xcode and React Native now. Any help will be appreciated.

So I'm testing a microapp that is contained in an IPFS folder. I use a web3 website that is used to view NFTs and their IPFS files. The app has gyro controls, which are enabled through a confirmation gesture. In iOS 18.5, when I press "Request Permission" button I get the popup to allow the app to acess movement and orientation. In iOS26, pressing the button does nothing. Keep in mind that this only happens through the website, that uses iframes. When I load the IPFS file from a direct link, the popup appears with no issue. I think this might be because iOS26 uses WebGPU or it might be a bug since iOS26 is still in beta.

Hello! I'm trying to upload images to Swift Playground on XCode, and it's not working. When I created my playground, there is no Resources folder or an assets file. If I simply drag an image file to the sidebar, the image is not showing up when used in the app. This may be a simple fix, but as a beginner, I am struggling to find the solution. Any help would be much appreciated! Thank you!

Hi, I'm generating MusicKit JWT tokens on my backend side and using it on the client side to query the Apple Music API. One concern I have is accidentally over issuing the scope of this JWT, resulting in accidental access more services than intended like DeviceCheck or APNS. Other than using separate keys for MusicKit and other services, is there a way to limit the generated JWT to only the Apple Music API (https://api.music.apple.com/v1/*) using the JWT payload scope?