I'm are attempting to use the device management migration feature in Apple Business Manager / Apple School Manager (for devices running iOS 26 / iPadOS 26) to re-assign managed devices from one MDM server to another. We followed the published procedure (select device(s) → Assign Device Management → Set deadline → Continue). However, we are observing that on the device side, no notification or prompt appears to the user (such as “Enrollment Required” or “Your organization requires this device to enroll in a different device management service”), even after the migration deadline has passed. Here are the environment details: Device OS version: (iOS 26.1) Device ownership: enrolled via Automated Device Enrollment MDM re-assignment in ABM: old MDM server（name: https://dev5.clomo.com/panel/mackey-dev/ ） → new MDM server (name: https://obliging-bunny-equally.ngrok-free.app/ ) Deadline set: (12/10/2025 12:00 AM) Network connectivity: confirmed online at deadline time We would like to know: Under what exact conditions will the device display the notification/prompt, and what common mis-configurations prevent it from appearing? Is there any device log or activity indicator in ABM/ASM to confirm that the migration instruction has been sent to the device? In cases where the prompt does not appear, what troubleshooting steps can we perform on the device (or in the MDM/ABM configuration) to correct it?

Hi Team, As per this documentation Handling NotNow Status Responses | Apple Developer Documentation, the last command that is delivered to the device on a connection should be the one that the device reported NotNow so that the device will automatically retry when it is ready to consume commands. Our question is it possible to have a fixed command which we can try at the end once all commands are tried and if device has reported NotNow for any of the commands. E.g. If there were 3 commands delivered to the device one by one SSO profile (com.apple.sso ) was delivered and device reported NotNow VPN profile (com.apple.vpn.managed) was delivered and the device reported NotNow DeviceInformation command was delivered and the device reported Acknowledged. As there were NotNow responses earlier, can we try a certificate profile(com.apple.security.pkcs1), with a dummy certificate payload, to ensure that the last command delivered to the device in this connection is responded with NotNow. Questions: Can we use a fixed command e.g. certificate profile(com.apple.security.pkcs1) as in above example to ensure the last command delivered to the device has NotNow response. Or is it better to try one of the commands which the device reported NotNow earlier. As in above example should we try the SSO or VPN profile at step 4 instead of the certificate profile? Following up to above, when a device reports NotNow for any profile installation command, can we say it will always report NotNow for certificate profile(com.apple.security.pkcs1) as well for all iOS and MacOS devices?

Hi everyone, We manage several macs through Microsoft Intune. We've deployed Platform SSO using the password based method (not the Secure Enclave) and have also enforced filevault encryption through policy. What we're trying to achieve is that multiple users can log into the same Mac. For example, I (the initial enrolling user) can log in without issues. However, we want a colleague to be able to log in as well if they're physically in front of the mac. The challenge we've run into is that once filevault is enabled (We're not sure about it but reading on forums it seems that the problem is filevault), it seems the network is not available at the login screen. This means that while the first user can create a mobile account and log in, a second user can't do the same. The moment we try to log in with another set of credentials, we get an immediate error and the password field shakes instantly, suggesting it's not even reaching out to the network or directory to validate the credentials. We'd like to confirm if this behavior is expected when FileVault is active and whether the only solution is to disable FileVault or if there are alternative solutions to allow network connectivity at the login screen. Essentially, we want to know if there's a way to let a second user log in without having to turn off disk encryption. Or if we can pre-authorize a set of users on the mac in order to create all the mobile account needed.. Thanks in advance! Thomas

New devices coming to this year is named as iPhone 17 .... Why we care not going for iPhone 26. .... ? if it is named as iPhone 26... in line with new version policy, it will be easier to relate in all perspective.

I originally posted here & was referred to post in developer forumsn. https://discussions.apple.com/thread/256036430?login=true&sortBy=rank&answerId=261319559022 There has to be someone else out here that's gone through this. I've tried everything I can think of, forums, reddit, Microsoft documentation.... just can't find any clear cut method of doing this. I'm working on an InTune Mobile App Protection Policy. I know there are going to be some VPs out there asking why they can't use native iOS Apps, especially Apple Calendar, Contacts & Mail. I have not been able to get anywhere, I always end up with this error. Things I've tried: Allow sync of native apps with work account Putting in app exemptions (But I don't truly know if I know if I have the right values for this and there's no simple way of getting it from what I've seen. Having to download app to PC, finding config files, finding specific values.... that people say are hit or miss). Allow data transfer of ALL Apps What am I missing here? I'm pretty much giving up and just going to say sorry, you can't use Native apps.. Period! Anyone have any experience with this, especially for Mail, Calendar & Contacts? Thank you for anyone that can offer advice on this.

私は現在Intuneを使ったAppleIntelligenceの機能制限方法を調査しております。 AppleIntelligenceの機能のうち、以下5点を制御したく、その方法について教えてほしいです。 ・作文ツール ・Gen文字 ・写真(クリーンアップ機能等) ・さまたげ低減モード(通知の要約・優先順位機能含む) ・ChatGPTのサインイン(同期)・使用 今回ここに聞いた経緯としては、Microsoft社に本調査の確認をとったところ、 「制御後のデバイスの動作についてはAppleのペイロードを使用した制限のため、Appleに確認をとってほしい」 と伝えられたからです。 以下サイトではIntuneのAppleIntelligence機能の制御項目(MDM)が17項目ありますが、 ところどころ実動作について文章では理解ができない部分がありました。 ・https://techcommunity.microsoft.com/blog/intunecustomersuccess/microsoft-intune-support-for-apple-intelligence/4254037 AppleDeveloperサポートにも確認をとりましたが、以下サイトを紹介のみで、 特に追加の情報はありませんでした。 ・https://aninterestingwebsite.com/documentation/devicemanagement/restrictions 上記５機能を制限するためにはどの制限項目を使用すればよいでしょうか。

I've account access level of developer. I want to create app specific password but go through the account but could not get any option to do so. Can somebody help me on this. Thanks in advance.

Hi There Our app is used in the hospital field and receives remote APNS via the Notification Service Extension. We found a scenario where screen is on, our app is in background, if a "Critical" notification is displayed as a banner at the top of the screen, subsequent normal notifications will be suppressed and no sound will play. Only after the user swipes away the critical notification will the normal notification appear and play a sound. is this as expected? I could not find any document on such case from Apple. Thanks.

I'm using Apple's MDM protocol InstalledApplicationListCommand to get information about installed apps. From iOS/iPadOS 26, the app information obtained by InstalledApplicationListCommand includes information on all apps including system apps (apps that come standard with iOS/iPadOS). https://aninterestingwebsite.com/documentation/devicemanagement/installed-application-list-command I want iOS/iPadOS26 to get the same information as the app information I get from the previous iOS/iPadOS, and I want to exclude system apps from the app information I get with the InstalledApplicationListCommand. As a way to exclude system apps, you can use the app ID I'm thinking of a way to exclude anything that starts with "com.apple" (the Identifier key value of the InstalledApplicationListResponse.InstalledApplicationListItem object). As a way to exclude system apps, please tell us whether the above method is appropriate and whether there will be any problems in the future.

Hi, We developed a Platform SSO extension for our IdP, Keycloak. It would be great to get some feedback on it: https://francisaugusto.com/2025/Platform_single_sign_on_diy/

Hello! I’m testing certificate issuance using a locally running Smallstep step-ca ACME server with the device-attest-01 challenge. I’ve created a custom MDM profile for this purpose. When I install the profile, the certificate is issued successfully, but it is not saved to the Keychain as stated in the documentation. I can only see the certificate via mdmclient or in the Wi-Fi settings dropdown menu. Is this expected behavior, or are there additional settings that need to be included in the MDM profile?

We have been trying to figure out how to block Apple Private Relay in our enterprise so we can monitor and filter our employees traffic. We are able to block the Private Relay via this process: We used this article from Fortinet to achieve this: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-block-iCloud-Private-Relay-from-bypassing/ta-p/228629 This also appears to block the users ability to utilize Apple iCloud Drive Backups. They would like to allow that still. Is there a way to block iCloud Private Relay while still allowing iCloud Drive Backups to work? I am not finding a document listing the URL requirements for iCloud Drive Backups. We currently have this solution in place: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-iCloud-private-relay/ta-p/383703 Basically this solution is allowing all Apple URL/IPs to go through the firewall and not be filtered. They would like to scan the traffic through. When scanning is enabled the firewall blocks the iCloud Private Relay traffic as it is blocked as being a proxy. Any guidance is greatly appreciated.

Hey. If i have a new idea for apple how can i reach out for you?

Hello, I have implemented my virtual meeting extension and my application shows no issues in the calendar application, with a join button displayed. Everything is great!. However, with the help of EKEventEditViewController and EKEvent instances, when creating an event from the main target of the application using EventKitUI, the event will not be displayed as a virtual meeting. I have seen that other applications like Zoom have already implemented this, and I find it difficult to find relevant documentation on how to link events created by the program to virtual meetings. How do I set an event as a meeting when I want to add it to the main program? In addition, the function in the VirtualConferenceProvider.swift file of the extension program fetchVirtualConference(identifier: EKVirtualConferenceRoomTypeIdentifier, completionHandler: @escaping (EKVirtualConferenceDescriptor?, (any Error)? ）->Void) How are the parameters in this function obtained? It's impossible for every conference related link to be the same

We have created provisioning profile from apple developer account for our iPadOS app, the expiry date shown in the profile is 20-Aug-2026. However, when when I build the app with this provisional profile the expiry date shown in the app is 6-May-2026. My Certification expires on 2027. I see a embeded.mobileprovision profile inside the app, and it has an expiry of 6-May-2026. I did a clean build, cleared unnecessary profiles from profile folder, created a new provisional profile and tried, but nothing seems help. We have a few apps, and no other app has this issue, only those two apps have this issue. As the expiry date the shorten, we also need to special handle these two apps, Will you please help me to resolve this issue? Thanks.

Hello, I am building a Content Filter app for iOS and would like to get access to some information about network connections that are happening on the device. I managed to have the handle(_ report: NEFilterReport) method of my NEFilterControlProvider called, but the bytesOutboundCount and bytesInboundCount properties of the report are always 0. How can I have the real byte count of the connection ?

We have a WebContentFilter that has an AllowList with a couple of domains and a DenyList that includes www.apple.com. This works on iOS18.x but doesn't work in iOS26 as www.apple.com can be reached. https://support.apple.com/en-gb/guide/deployment/depc77c9609/web Indicates that .apple.com is always accessible but evidence seems to indicate this wasn't the case pre iOS26. An older version of this page https://web.archive.org/web/20220427202204/https://support.apple.com/en-gb/guide/deployment/depc77c9609/web has no mention of .apple.com although field names are also different. Has this change come about due to the filtering changes introduced in iOS26 and is there any way we can still block .apple.com going forward. Would a content plugin be an options ?

We are experiencing a critical issue where VPP app installations are consistently taking an excessive amount of time, leading to significant delays in asset association. We are deployionThis is a systemic problem that affects all VPP apps, not just an isolated case. Apps: 39470db7-e475-4269-9709-c80641657027 => com.zimride.instant d0876900-2579-463e-99f1-b7c85ef5c5e8 com.microsoft.azureauthenticator Troubleshooting: We have performed extensive troubleshooting and can confirm the following: VPP Token: The VPP token has been successfully renewed and is currently active and valid. License Availability: We've verified that there are sufficient VPP licenses available for the apps being deployed. Device Status: We've attempted the following on the affected devices: Restarted the devices. Switched to different Wi-Fi networks. Uninstalled and re-installed the apps. App Status: The issue is not limited to a single app; all VPP apps are failing to install. License Revocation: We attempted to revoke and reassign licenses for some devices, but this did not resolve the issue. The app was not pushed, and the pending status remained. Troubleshooting: Through our internal investigation, we have determined that the core issue is that the Asset Association Status is consistently taking excessive time. This seems to be preventing the app installation queue from processing. We have observed a significant delay in the processing of events within the Notification Channel. The time between the event being created and a response being received is excessively long, indicating a potential backlog or issue. We have included a few recent examples below for your reference: Event ID: 39470db7-e475-4269-9709-c80641657027 com.zimride.instant Created Time: 2025-08-26 01:02:04 Response Time: 2025-08-26 01:34:05 Event ID: d0876900-2579-463e-99f1-b7c85ef5c5e8 com.microsoft.azureauthenticator Created Time: 2025-08-25 21:16:29 Response Time: 2025-08-25 22:21:07 We would appreciate your help in the following areas: Resolution: Could you provide any known solutions or workarounds for an asset association status that is taking excessive amount of time'? Best Practices: Are there any recommended best practices or additional parameters we should be checking with the MDM that might influence the queueing of VPP app assignments? Queueing Parameters: Could you provide insight into the parameters or conditions that can affect the queueing and processing of VPP app installations on Apple's servers? Please let us know if there is any additional information or logs we can provide.

Steps to Reproduce Step 1: Fetch Initial Device List Called the device list endpoint to retrieve all devices and saved the cursor: GET https://mdmenrollment.apple.com/server/devices Step 2: Modify Devices Added and deleted several devices via https://business.apple.com/ Step 3: Sync Without Pagination Called the sync endpoint using the cursor from Step 1 (no limit): GET https://mdmenrollment.apple.com/devices/sync?cursor={step1_cursor} Result: Returned 3 device records as expected: { "devices": [ { "serial_number": "F70JJ4C16L", "op_type": "added", "op_date": "2025-12-11T07:05:05Z" }, { "serial_number": "F70JJ4C16L", "op_type": "deleted", "op_date": "2025-12-11T07:04:36Z" }, { "serial_number": "C8RWGXZXJWF5", "op_type": "deleted", "op_date": "2025-12-11T07:04:52Z" } ], "more_to_follow": false } Step 4: Sync With Pagination (First Page) Called the sync endpoint using the same cursor from Step 1 with limit=1: GET https://mdmenrollment.apple.com/devices/sync?cursor={step1_cursor}&limit=1 Result: Returned 1 record with more_to_follow: true — indicating more data exists: { "devices": [ { "serial_number": "F70JJ4C16L", "op_type": "added", "op_date": "2025-12-11T07:05:05Z" } ], "more_to_follow": true, "cursor": "MTowOjE3NjU0MzgyNDI5ODc6..." } Step 5: Sync With Pagination (Second Page) Called the sync endpoint using the cursor from Step 4 with limit=1: { "devices": [], "more_to_follow": false } Expected Behavior When paginating with limit=1, the API should return all 3 records across 3 sequential requests. Actual Behavior Without pagination: Returns 3 records ✓ With pagination (limit=1): Returns only 1 record, then empty array ✗ 2 records are missing when using pagination. Impact This inconsistency makes the sync API unreliable for incremental device synchronization workflows.

How can we receive the iPadOS 18.6.1 update on an iPad? We have configured the MDM update days policy to receive recent, but not the latest, iPadOS updates; however, we are only able to get versions 18.6.2 and 18.6. Is the availability of iPadOS updates dependent on the iPad's region? Thank you in advance for your assistance.