I am editing my iOS project in Xcode 16 and want to use the "Swift Compiler - Upcoming Features" section of the build settings to selectively enable the new Swift 6 language features. I have read the instructions for doing this and have dowloaded an Apple sample project and can see that section under the project and target-level Build Settings in the sample project However, when I open my Xcode project in XCode 16 that section does not appear. Is there any way for me to influence how Xcode 16 displays the build settings? In fact, no "Swift Compiler" sections appear at all under my project Build Settings (All | Combined). There is a "User-Defined" section that has the Swift Version, Compilation Mode and Optimization level. The project itself is several years old and was on a very old project version. I have upgraded my project document format to "Xcode 16" but it made no difference. I have compared my project and the sample project in a text editor and both seem to have similar structure. I tried removing unused and outdated settings from my project but that also had no effect. Is there an alternative to deleting my project file and adding the source files to it? I have a large project with multiple targets so that would be something I'd rather not do.

I'm working on a FileProvider which allows access to encrypted files in Dropbox; I can successfully read and present the decrypted files, so I know it's basically working. But I'm having problems getting FileProvider to re-enumerate a folder when its encryption status changes. When the FileProvider receives an update notification saying a folder is now encrypted, I use signalEnumerator to re-enumerate the folder: FileProviderExtension.manager?.signalEnumerator(for: existingItem.itemIdentifier, completionHandler: { (ourError : Error?) -> Void in       if let ourError = ourError {           log("notifyCallback: mount / unmount failed re-enumeration: \(ourError)")       } else {           log("notifyCallback: mount / unmount signalled re-enumeration; pending")       } }) The log reports that the re-enumeration is pending... but as far as I can tell, neither enumerateItems nor enumerateChanges is called on the folder's item unless a Finder window is actually open for that folder. This means that, when an app other than Finder tries to access the files through the filesystem, it doesn't see the updated set of filenames. (For further reference: I've added code to both enumerateItems and enumerateChanges, so that if the call has been triggered by a recent folder-encryption notification, it retrieves a complete set of items from the Dropbox folder. If a retrieved file has an encrypted filename, it reports it as a modified item and returns its filename in-clear; if the filename isn't encrypted, it doesn't return the item (for enumerateItems) or returns it as a deleted item (for enumerateChanges). This approach seems to work successfully for listing folders with a constant state; it's only if the user encrypts / decrypts a folder without currently having a Finder window open inside that folder that I'm not seeing a refresh.) Any advice on how I can force a re-enumeration without a Finder window currently being displayed?

Hey folks, Looking for some assistance with using an API key with xcodebuild commands to archive/export builds on our Enterprise developer account. The goal here is to allow Xcode to completely manage signing/certificates with our cloud distribution certificate, since these builds are happening in CI and we don't want to be manually handling user sessions/certificates on these machines. This is working great with our App Store account, but with our Enterprise account we're getting errors both archiving and exporting the builds. Here's an example of an export command that is giving errors: xcodebuild -exportArchive -exportOptionsPlist /path/to/exportOptions.plist -archivePath /path/to/archive.xcarchive -exportPath /path/to/export -authenticationKeyID *** -authenticationKeyIssuerID *** -authenticationKeyPath /path/to/key.p8 -allowProvisioningUpdates I've put some example values there, but we've double/triple checked the real values when this is actually running. These are the errors we're getting: 2026-02-02 12:30:04.022 xcodebuild[59722:1854348] DVTServices: Received response for 0794248F-E534-474D-ABBF-40C1375B6590 @ <https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA>. Error = Error Domain=DVTPortalResponseErrorDomain Code=0 "Communication with Apple failed" UserInfo={NSLocalizedDescription=Communication with Apple failed, NSLocalizedRecoverySuggestion=A non-HTTP 200 response was received (401) for URL https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA} 2026-02-02 12:30:04.173 xcodebuild[59722:1854348] DVTServices: Received response for 1D51FCD1-1876-4881-BE89-DD44E78EA776 @ <https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA>. Error = Error Domain=DVTPortalResponseErrorDomain Code=0 "Communication with Apple failed" UserInfo={NSLocalizedDescription=Communication with Apple failed, NSLocalizedRecoverySuggestion=A non-HTTP 200 response was received (401) for URL https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA} 2026-02-02 12:30:04.322 xcodebuild[59722:1854344] DVTServices: Received response for 25D7983F-1153-47C9-AE8A-03A8D10B6453 @ <https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA>. Error = Error Domain=DVTPortalResponseErrorDomain Code=0 "Communication with Apple failed" UserInfo={NSLocalizedDescription=Communication with Apple failed, NSLocalizedRecoverySuggestion=A non-HTTP 200 response was received (401) for URL https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA} 2026-02-02 12:30:04.483 xcodebuild[59722:1854344] DVTServices: Received response for 8A56C98B-E786-4878-856F-4D7E3D381DEA @ <https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA>. Error = Error Domain=DVTPortalResponseErrorDomain Code=0 "Communication with Apple failed" UserInfo={NSLocalizedDescription=Communication with Apple failed, NSLocalizedRecoverySuggestion=A non-HTTP 200 response was received (401) for URL https://appstoreconnect.apple.com/xcbuild/QH65B2/listTeams.action?clientId=XABBG36SBA} error: exportArchive Communication with Apple failed error: exportArchive No signing certificate "iOS Distribution" found We get very similar errors when archiving as well. Are we doing something incorrect here? Is API key usage with xcodebuild not supported for Enterprise builds? Appreciate any help y'all can provide!

I’m using macOS Tahoe 26, and Xcode is version 26.2. I’ve tried all the methods suggested online, but I still can’t download it. In addition, iOS 26.* and iOS 18.* simulators also fail to download. The error messages are shown below. Download failed. Domain: DVTDownloadableErrorDomain Code: 41 User Info: { DVTErrorCreationDateKey = "2026-01-06 01:25:11 +0000"; } Download failed. Domain: DVTDownloadableErrorDomain Code: 41 Failed fetching catalog for assetType (com.apple.MobileAsset.iOSSimulatorRuntime), serverParameters ({ RequestedBuild = 23C54; }) Domain: DVTDownloadsUtilitiesErrorDomain Code: -1 Download failed due to a general networking error. (Catalog download for com.apple.MobileAsset.iOSSimulatorRuntime) Domain: com.apple.MobileAssetError.Download Code: 47 User Info: { tryAgainLater = 1; } System Information macOS Version 26.0 (Build 25A354) Xcode 26.2 (24553) (Build 17C52) Timestamp: 2026-01-06T09:25:11+08:00

I'm trying to download an iOS Simulator runtime in Xcode 26.2 or 26.1 on macOS 26.1, but the download keeps failing with the following error: Download failed. Domain: DVTDownloadableErrorDomain Code: 41 Failed fetching catalog for assetType (com.apple.MobileAsset.iOSSimulatorRuntime), serverParameters ({ RequestedBuild = 23C54;}) Domain: DVTDownloadsUtilitiesErrorDomain. Code: -1. Download failed due to a bad URL. (Catalog download for com.apple.MobileAsset.iOSSimulatorRuntime) Domain: com.apple.MobileAssetError.Download Code: 49 User Info: {checkConfiguration = 1;} macOS &amp; Xcode Info: macOS Version: 26.1 (Build 25B78) Xcode Version: 26.2 (24553) (Build 17C52) What I've tried so far: Formatted my Mac and reinstalled Xcode multiple times. Completely deleted Xcode and its related files several times (/Applications/Xcode.app, caches, preferences). Tried different internet connections from multiple locations. Checked Apple servers and verified network. Attempted downloading other simulator runtimes (fail). but download fails immediately with DVTDownloadableErrorDomain Code 41 and bad URL error. Question: How can I fix the simulator download issue in Xcode 26.2 on macOS 26.1? Is there a known workaround for the bad URL / catalog download error?

I have been using Xcode Version 26.1.1 on macOS Tahoe Version 26.1. In VIM mode, whenever I quickly tap d twice, to delete the complete line, most of the time Xcode crashes. Is anyone else facing this issue? Should I move to any older version of Xcode or any other solve for this?

I know there are several existing threads on this topic but things keep changing. The release notes for Xcode 26 beta 3 have the following statements for a couple of resolved issues: Asset Catalog Fixed: Unable to set Icon Composer icon as alternate iOS icon (153305178) (FB18025356) Icon Composer Fixed: Icon Composer icons back deploy to older versions of iOS, macOS, and watchOS with inconsistent rendering. (152258860) I had a working solution under beta 1 and beta 2 for both of these. But under beta 3, I am now seeing the new glass icons for my app when running on a simulated iOS 18 device. This is happening for both the main app icon and any alternates. This contradicts the statement that beta 3 fixes this issue. There is no documentation (that I can find) describing how you are supposed to support old icons for iOS 18 and new glass icons for iOS 26. There is no documentation for how to support alternate glass icons for iOS 26. What I'm doing at the moment (that worked before beta 3) was to have the normal iOS 18 app icons in the Asset catalog and to have the new glass icons added to the project. The filenames for the glass .icon files have the same name as the app icons in the Assets catalog. This worked under beta 1 and beta 2. And despite the Xcode 26 beta 3 release notes stating that Icon Composer icons no longer back deploy to iOS 18, I'm seeing the opposite. Beta 3 now does the opposite of that statement. Does anyone have a working solution that supports old iOS 18 app icons and new iOS 26 glass icons using Xcode 26 beta 3? Note, all of my testing is with simulated iOS devices and I'm running Xcode 26 beta 3 under macOS 15.5. Maybe that's an issue?

Out of nowhere I got some red banner on top of my iPhone 13 mini / iOS 17.5. I cannot pin point the root cause of this. What I can say is that it only happens to Simulators of a certain type, e.g. iPhone 12 and 13 mini, but not iPhone 14 for example. I have installed Xcode 26.1.0 and 26.1.1, out of which 26.1.0 is selected: $ xcode-select -p /Applications/Xcode-26.1.0.app/Contents/Developer And following runtimes: $ xcrun simctl runtime list == Disk Images == -- iOS -- iOS 17.5 (21F79) - CF933623-A258-44F8-B248-C0F25C0C343B (Ready) iOS 26.1 (23B80) - D11C3CDC-EE3D-44CC-8B92-9B7D00B54B0B (Ready) Total Disk Images: 2 (14.6G) Installing the newer 26.1 23B86 runtime doesn't help either.

After updating my system to macOS Tahoe 26.1 and Xcode 26.1, all breakpoints in my project fail to work. When I run the application in Debug mode, any enabled breakpoint (blue) immediately becomes disabled (grayed out) the moment the app launches. The application runs, but the debugger never stops. This issue occurs in any location, including in the application's init() method, which should always be hit. This behavior suggests that the LLDB debugger is failing to attach to the process at launch or is being instructed not to enable breakpoints. System Configuration: Mac Model: MacBook Pro 14" (2021), Apple M1 Pro macOS Version: Tahoe 26.1 Xcode Version: 26.1 Project Type: SwiftUI App for macOS Troubleshooting Steps Performed (All Unsuccessful): We have performed an extensive series of troubleshooting steps to resolve the issue, none of which have worked. These steps include: Basic Project Cleaning: Cleaned the build folder (Product > Clean Build Folder). Deleted the entire DerivedData directory. Deleted the project's xcuserdata folder. Xcode & System Procedures: Restarted Xcode multiple times. Rebooted the Mac multiple times. Reinstalled Xcode Command Line Tools using xcode-select --install. Reset the Xcode path using sudo xcode-select --reset and sudo xcode-select -s /Applications/Xcode.app/Contents/Developer. Forced an update of the system's shared cache with xcrun simctl runtime dyld_shared_cache update --all. Project Build Settings Verification (for Debug configuration): Build Configuration: Verified that the "Run" scheme is set to Debug. Optimization Level: Confirmed it is set to No Optimization [-O0]. Debug Information Format: Confirmed it is set to DWARF with dSYM File. Strip Swift Symbols: Confirmed it is set to No. (This was a new setting noticed after the Xcode update). Enable Hardened Runtime: Attempted setting this to both Yes and No. The issue persists in both cases. Validate Workspace: Confirmed it is set to Yes. Code Signing: Verified that "Automatically manage signing" is enabled with a valid team. Manually deleted and re-created the "Apple Development" certificates via Xcode's Accounts settings. Direct LLDB Testing: Created a ~/.lldbinit file. Using breakpoint list, confirmed that LLDB starts with "No breakpoints currently set," indicating that Xcode is likely not passing the breakpoints to the debugger. Using settings set target.process.stop-on-entry true, confirmed that the app still does not stop on entry, suggesting the debugger is failing to attach to the process at all. Conclusion: Given that all standard and advanced troubleshooting steps have failed, and the issue started immediately after updating both macOS and Xcode to a non-public release (Tahoe 26.1 / Xcode 26.1), this appears to be a regression or a bug in the new development environment. The failure of stop-on-entry strongly suggests a fundamental issue with the debugger attachment process on this specific OS and Xcode combination.

Hello everyone, We are seeing some warnings in Xcode 16 when I archive my iOS app for distribution. During the upload phase (either via Xcode Organizer ), I get an error like: WARNING: Upload Symbols Failed The archive did not include a dSYM for MyFramework.framework with the UUIDs: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX Ensure that the archive’s dSYM folder includes a DWARF file for MyFramework.framework with the expected UUIDs. Question: How can these warnings be fixed? Is this warning safe to ignore if I know the vendor does not supply a dSYM for their framework? If I do need a proper dSYM for full symbolication, how should I request it from the vendor or generate it myself from an XCFramework?

Any idea what this message means? I assume it's coming from CloudKit, but the application seems to store and retrieve data properly.

I am writing to report multiple issues encountered after updating to Xcode 26 Beta, which have significantly impacted my project's compilation and functionality. My project can run normally in Xcode16.3 version, Below are the specific problems, along with the steps I took to address them and the subsequent errors that arose: Symbol Not Found Error for _NSUserActivityTypeBrowsingWeb After updating to Xcode 26 Beta, my project failed to build with the error: "Symbol not found: _NSUserActivityTypeBrowsingWeb." To resolve this, I removed the MobileCoreServices framework from the Build Settings, as it appeared to be related. However, this led to a new error, indicating that this change introduced further complications. Clang++ Error: No Such File or Directory 'OpenGLES' Following the resolution of the first issue, I encountered a new error: "iOS clang++: error: no such file or directory: 'OpenGLES'." To address this, I added the OpenGLES.framework to the Build Phases. While this resolved the clang++ error, it triggered additional errors, suggesting that the underlying issue persists or new dependencies are conflicting. Recurring XIB File Compilation Errors My project uses XIB files, and every time I attempt to compile and run, Xcode reports errors related to different XIB files. Notably, when I open the reported XIB file, no errors are displayed within the Interface Builder. After saving or inspecting the file, the compilation error temporarily disappears, only for another XIB file to trigger the same issue in the next build. This creates a repetitive cycle. I have confirmed this is not a caching issue, as I clean the build cache (Product &gt; Clean Build Folder) before each run. If I skip cleaning the cache, the OpenGLES-related error (Issue 2) reappears, indicating potential interactions between these problems. These issues have made development with Xcode 26 Beta extremely challenging, as each attempted fix seems to introduce new errors, and the XIB issue creates a persistent loop. My setup includes: Xcode Version: 26.0 beta 2 (17A5241o) macOS Version:15.4.1 (24E263)

ChatGPT in Xcode 26.1 is super slow for me, anyone else? The response returns quickly but the preview window takes a few seconds per line. What it used to do in a few seconds on 26.0 now takes tens of minutes. Anyone else running into this and have suggestions? I'm using the minimal setting on a fast internet connection. M2 Pro MBP, macOS 26.1.

Hi, in our Xcode project we have a Tooling package, which defines build tool plugins for generating compile time safe constants for our localization strings as well as assets using swiftgen. This is working very well in Xcode 16, but fails in Xcode 26 beta 1 and beta 2 as well. The failure is specifically: unsupported configuration: the aggregate target 'Localization' has package dependencies, but targets that build for different platforms depend on it. I've reduced this to a minimal sample project, which you can find here.. To reproduce: Open the Repro workspace, that is attached in Xcode. Try to build TestyPackage. You'll see the error. I've filed this bug during WWDC week, but no feedback yet and no solution in Xcode 26 beta 2. Here's the feedback number, in case you have this too and want to file a duplicate: FB17934050. Does anyone else have this issue and perhaps a solution?

Hello everyone, I am encountering a persistent issue with Xcode where I’m unable to install my app on a testing device due to the following error message: Failed to verify code signature of /var/installd/Library/Caches/com.apple.mobile.installd.staging/temp.SznYNY/extracted/iForC.app : 0xe8008018 (The identity used to sign the executable is no longer valid.) Here’s what I have tried so far to resolve this issue: 1. Ensured that all my certificates and provisioning profiles are current and valid. 2. Removed all related certificates from my Keychain and reinstalled new ones. 3. Cleaned and rebuilt the project multiple times. 4. Unpaired the device and paired it again. 5. Reinstalled the latest version of Xcode. 6. Performed a complete restore of my Mac. Despite these troubleshooting steps, I am still facing the same issue. I would greatly appreciate any insights or experiences related to this error from anyone who has overcome similar challenges. Thank you in advance for your help!

Right now, I am trying the tutorial for SwiftUI from the Apple Developer Program inside of Xcode, but I encountered a problem. Inside of the selectable canvas mode in Xcode, I wanted to command-control-click the element (in this case, a text) to bring up the editing popover and select "Show SwiftUI Inspector." For some reason, on the popover menu, the only option was "Embed." I only wanted the menu point Show SwiftUI Inspector, and I also tried the shortcut Ctrl+Option, but nothing worked. Now is there another method to get to this menu? Or can you help me with that? Noah

I'm getting hundreds of the message below in Xcode. I've narrowed it down to when I instantiate the following AVAudioUnitComponentManager.shared() Message send exceeds rate-limit threshold and will be dropped. { reporterID=231700600717315, rateLimit=32hz }

Hello, I'm having issues trying to Install the iOS 26.0 + iOS 26.0.1 Simulator on Xcode 26.0.1. I'm getting this error Download failed as the server said it was a bad request. (Asset download for com.apple.MobileAsset.iOSSimulatorRuntime 39434c057e7b18d2f1447aeb47e9bb6b6dbff077) I have attached the full logs. Thanks xcode-error.txt

"EnableLiveAssetServerV2-com.apple.MobileAsset.MetalToolchain" = on; ProductName: macOS ProductVersion: 26.0.1 BuildVersion: 25A362 The MetalToolchain is installed, however I keep getting error that MetalToolchain cannot be found by the Xcode "Command CompileMetalFile failed with a nonzero exit code" error: error: cannot execute tool 'metal' due to missing Metal Toolchain; use: xcodebuild -downloadComponent MetalToolchain ❯ xcodebuild -downloadComponent MetalToolchain 2025-10-31 11:18:29.004 xcodebuild[6605:45524] IDEDownloadableMetalToolchainCoordinator: Failed to remount the Metal Toolchain: The file “com.apple.MobileAsset.MetalToolchain-v17.1.324.0.k9JmEp” couldn’t be opened because you don’t have permission to view it. Beginning asset download... 2025-10-31 11:18:29.212 xcodebuild[6605:45523] IDEDownloadableMetalToolchainCoordinator: Failed to remount the Metal Toolchain: The file “com.apple.MobileAsset.MetalToolchain-v17.1.324.0.k9JmEp” couldn’t be opened because you don’t have permission to view it. Downloaded asset to: /System/Library/AssetsV2/com_apple_MobileAsset_MetalToolchain/4ab058bc1c53034b8c0a9baca6fba2d2b78bb965.asset/AssetData/Restore/022-17211-415.dmg Done downloading: Metal Toolchain 17A324.

Can we use Icon Composer to drive an app icon for iOS 26 apps today? I get errors uploading a build to TestFlight internal testing about missing App icon dimensions for an iOS 26 app.