我想在我的 Mac OS 项目 （Swift UI） 中添加一个 Package dependency Package，但我只能添加一个 Package Collection，我不能只添加一个单独的包依赖包，我想添加 mysql kit 以使我的项目链接到 Mysql 数据库

Where are the local documentation files location on MacOS? None of the existing data on the internet is applicable anymore. Trying to bundle documentation for use in an LLM and the developer site is unusable for crawling. Thanks! *.docset

I built an app in Python with Kivy and I'm trying to bring it over to iOS. I made an Xcode project out of it that builds successfully, but it fails to install in the simulator or onto a device. There's an error about symlink, but I'm not sure how to fix it. Any advice would be appreciated. Domain: IXUserPresentableErrorDomain Code: 1 Failure Reason: Please try again later. Recovery Suggestion: invalid symlink at /Users/seanaldous/Library/Developer/CoreSimulator/Devices/96414FA1-78EF-4B59-979C-EAFB318C9653/data/Library/Caches/com.apple.mobile.installd.staging/temp.509ha0/extracted/sert.app/YourApp/.venv/bin/python3 User Info: { DVTErrorCreationDateKey = "2025-04-08 15:09:36 +0000"; IDERunOperationFailingWorker = IDELaunchiPhoneSimulatorLauncher; SimCallingSelector = "installApplication:withOptions:error:"; } -- Unable to Install “sert” Domain: IXUserPresentableErrorDomain Code: 1 Failure Reason: Please try again later. Recovery Suggestion: invalid symlink at /Users/seanaldous/Library/Developer/CoreSimulator/Devices/96414FA1-78EF-4B59-979C-EAFB318C9653/data/Library/Caches/com.apple.mobile.installd.staging/temp.509ha0/extracted/sert.app/YourApp/.venv/bin/python3 -- invalid symlink at /Users/seanaldous/Library/Developer/CoreSimulator/Devices/96414FA1-78EF-4B59-979C-EAFB318C9653/data/Library/Caches/com.apple.mobile.installd.staging/temp.509ha0/extracted/sert.app/YourApp/.venv/bin/python3 Domain: MIInstallerErrorDomain Code: 70 User Info: { FunctionName = "-[MIFileManager validateSymlinksInURLDoNotEscapeURL:error:]_block_invoke"; LegacyErrorString = InvalidSymlink; SourceFileLine = 1161; } -- Event Metadata: com.apple.dt.IDERunOperationWorkerFinished : { "device_identifier" = "96414FA1-78EF-4B59-979C-EAFB318C9653"; "device_model" = "iPhone17,3"; "device_osBuild" = "18.3.1 (22D8075)"; "device_platform" = "com.apple.platform.iphonesimulator"; "device_thinningType" = "iPhone17,3"; "dvt_coredevice_version" = "397.28"; "dvt_coresimulator_version" = "993.7"; "dvt_mobiledevice_version" = "1759.81.1"; "launchSession_schemeCommand" = Run; "launchSession_state" = 1; "launchSession_targetArch" = "x86_64"; "operation_duration_ms" = 32680; "operation_errorCode" = 1; "operation_errorDomain" = IXUserPresentableErrorDomain; "operation_errorWorker" = IDELaunchiPhoneSimulatorLauncher; "operation_name" = IDERunOperationWorkerGroup; "param_debugger_attachToExtensions" = 0; "param_debugger_attachToXPC" = 1; "param_debugger_type" = 3; "param_destination_isProxy" = 0; "param_destination_platform" = "com.apple.platform.iphonesimulator"; "param_diag_113575882_enable" = 0; "param_diag_MainThreadChecker_stopOnIssue" = 0; "param_diag_MallocStackLogging_enableDuringAttach" = 0; "param_diag_MallocStackLogging_enableForXPC" = 1; "param_diag_allowLocationSimulation" = 1; "param_diag_checker_tpc_enable" = 1; "param_diag_gpu_frameCapture_enable" = 0; "param_diag_gpu_shaderValidation_enable" = 0; "param_diag_gpu_validation_enable" = 0; "param_diag_guardMalloc_enable" = 0; "param_diag_memoryGraphOnResourceException" = 0; "param_diag_mtc_enable" = 1; "param_diag_queueDebugging_enable" = 1; "param_diag_runtimeProfile_generate" = 0; "param_diag_sanitizer_asan_enable" = 0; "param_diag_sanitizer_tsan_enable" = 0; "param_diag_sanitizer_tsan_stopOnIssue" = 0; "param_diag_sanitizer_ubsan_enable" = 0; "param_diag_sanitizer_ubsan_stopOnIssue" = 0; "param_diag_showNonLocalizedStrings" = 0; "param_diag_viewDebugging_enabled" = 1; "param_diag_viewDebugging_insertDylibOnLaunch" = 1; "param_install_style" = 2; "param_launcher_UID" = 2; "param_launcher_allowDeviceSensorReplayData" = 0; "param_launcher_kind" = 0; "param_launcher_style" = 0; "param_launcher_substyle" = 0; "param_runnable_appExtensionHostRunMode" = 0; "param_runnable_productType" = "com.apple.product-type.application"; "param_structuredConsoleMode" = 1; "param_testing_launchedForTesting" = 0; "param_testing_suppressSimulatorApp" = 0; "param_testing_usingCLI" = 0; "sdk_canonicalName" = "iphonesimulator18.2"; "sdk_osVersion" = "18.2"; "sdk_variant" = iphonesimulator; } -- System Information macOS Version 15.3.2 (Build 24D81) Xcode 16.2 (23507) (Build 16C5032a) Timestamp: 2025-04-08T08:09:36-07:00

Hi I developed an iPhone app but now I want to release the same app for iPad and Mac (Design for iPad). I made the changes below but I still not been able to install the app on my Mac. It says the app is incompatible but my Mac is MacBook Pro M2 which fills the requirements to install it. Things I did so my iPhone app could have support for iPad and Mac Added iPad and Mac (Designed for iPad) for the supported destinations Change the Status Bar Style to Require full screen Changed iOS minimum Deployments iOS to 17.6 Updated the launch screen logo so stays in the middle Xcode version 16.2 See the sccreenshots of the Xcode configuration and of the TestFlight on my MacBook Pro M2 Is there anything else I need to do? Thanks.

I'm working on dext project (c++), Base SDK and Supported Platforms are set to DriverKit. #include causes errors: error "The iostreams library is not supported since libc++ has been configured without support for localization." error "<locale.h> is not supported since libc++ has been configured without support for localization." Also it's not possible to define custom log object: undeclared identifier 'os_log_create'. <os/log.h> included and os_log function is compiled correct. macOS as additional SDK did not help. Thanks a lot for any hint.

I have an Apple Watch 4. (GPS). It's on version 10.6. I'm trying to deploy a basic app onto it (IOS 18) (WatchOS 9.6). I've set the targets in General for Watch App, Watch AppTest, Watch AppUITest. I still get an Apple Watches watchOS doesn't match App Watch app.app watch02 9.6 deployment target. Upgrade users Apple Watch watchOS version or lower app app.apps deployment target. What can I do to fix this?

Hello. For the last few months I have been facing a situation for which I do not understand either the reason or the solution. Here is an example for the last few weeks: In App Store Connect it shows 214 crashes for the last week In Xcode it shows 56 crashes for the last 2 weeks without stack traces (NO_CRASH_STACK) In Firebase Crashlytics there is not a single crash. When I click "Show in Finder" it opens a folder with .xccrashpoint files. As far as I understood from the instructions on posting crash reports - this is not what is needed. Interesting point: it looks like the errors occur on iOS 15-16 devices. I have several questions: Why is the number of crashes in Xcode different from the number in App Store Connect? Where are the other crashes? How can I understand what the problem is if there are no stack traces in Xcode?

Hi! A few months ago my flutter project was building successfully and then suddenly stopped working after an xcode update. In the latest attempt to build, I see error message Module ‘audioplayers’ not found (in target ‘Runner’ from project ‘Runner’). Thank you in advance for any help! Flutter version: Flutter 3.3.0-0.5.pre • channel beta Xcode version: 16.3 Target ios version: ios 12.0

After updating to 16.3, my project now fails to compile with the diagnostic: "Command SwiftCompile failed with a nonzero exit code". This is a SwiftUI document project with two local packages, the second of which is a rather large one with 112 SwiftUI files. It is this second package that is failing. There are no issues when compiling with 16.2. Without diagnostics I'm having a bit of difficulty in determining the cause. My thought is to regress the commits unit 16.3 gives a success, or shows issues. Although I'm not catching a similar issue in the forums, I'm seeing other problems with 16.3. Has anyone else had such build failure isolated to 16.3? Any advice on other ways to approach this problem? Thanks in advance

Hi all, I’m running into an issue with my iOS + Apple Watch app project, and I could really use some advice. My WatchOS app requires an iOS companion for settings and configuration, so both apps need to be distributed together. Here’s how I structured my Xcode project: Main iOS App target WatchOS App target WatchOS Extension target However, I’m very confused about how these targets interact, and things are not working as expected. The problem: I can build and run the WatchOS app and its extension independently in the simulator by selecting their schemes. When I select the main iOS app scheme, I get an error about ITSWatchOnlyContainer in the Info.plist—even though there’s no Info tab for that target in Xcode. I’m able to distribute the WatchOS app by itself, and the extension as well. But I can’t distribute them bundled together as a single package, and I haven’t found any clear resources that explain how to fix this. This is my very first app, and it’s frustrating to get stuck just before the finish line! Project Structure / steps to reproduce Let’s say my project is called MyAppProject, with these targets: MyAppProject Main iOS App Embedded target: MyAppProject Watch App Bundle identifier: com.example.MyAppProject MyAppProject Watch App WKCompanionAppBundleIdentifier: com.example.MyAppProject “Requires iOS App”: YES MyAppProject Extension Bundle identifier: com.example.MyAppProject When running from the MyAppProject scheme, I get this error (even though I can’t see or edit the Info.plist in Xcode for this target): “Please try again later. This app has the ITSWatchOnlyContainer key set in its Info.plist, which identifies it as a shell app surrounding a Watch-only app; these are not installable.” As a result, I can’t distribute the app as a bundle. I’d appreciate help understanding: How should the Info.plist files be configured for each target? What do I do if the Info.plist path seems missing in the Xcode UI? Is there a “correct” way to structure an iOS + WatchOS app for bundled distribution?

So Xcode has projects. And I breakup my code/libraries/targets into those. So why after 20 years of Xcode, can a workspace, that holds projects not display the same project opened in another workspace? The workspace redirects all output the project would normally generate in DerivedData to a completely different folder by default. What this means is I have to shut one workspace, and then open the other workspace with a different set of projects to see the ones that are shared. The workspace can't build because it can't open the project shared with another one that is open. VS sln files don't have this issue, so why do workspace files.

As far as I know, there was a time that you can capture GPU workload for opengles game app on iOS using Xcode. However, currently I'm using Xcode version 15.2 and iOS18，it seems the "capture GPU workload" button is always disabled when I'm trying to debug my game app which is using opengles api for graphics rendering no matter switchinng "GPU Frame Capture" to "OpenGL ES" or "Metal" or "Automatically" in the scheme. And I'm not able to capture GPU workload for my game on iOS. The only way to make the "capture GPU workload" button enabled is creating a new project using metal api for graphics rendering. But I don't want to change the graphics API, because it will cause a lot. Does Xcode still support capturing GPU workload for OpenGLES game app on iOS? If not, is there an alternative way?

I'm experiencing an issue with a custom font not loading properly in Xcode 16.3. The font files are included in the bundle, listed in Info.plist, and verified for correct names using UIFont.familyNames, but they still don't appear at runtime. Has anyone else run into this with Xcode 16.3? Could this be related to recent changes in asset packaging or font catalogs?

Our business is to scan the code to open App Clip, but then App Clip will appear in App Library and Siri Suggestions. This can be opened quickly, but the URL of the last scan will be included. This will cause a problem, for example: if the previous scan was code A, but the user does not scan code B when going to place B and directly opens it through App Library or Siri Suggestions, the code I get is still code A, so the result I want is that I want to know where it was opened from, and then if it is opened quickly, I will clear the URL and remind the user to scan the code again. Or if it is opened by quick opening, do not include the URL

I’ve developed an Apple Watch extension for an existing iOS app. When I run the app on the watch via Xcode using the simulator, everything works fine. However, when I try to install it on my iPhone, the Watch app doesn’t show it in the "Available Apps" list, so I can't install it on the watch. The Apple Watch is connected to my iPhone, and I can see other apps available for installation without any issues. I also created a brand new project with watchOS support to troubleshoot, but the same problem occurred. Any ideas on how to resolve this?

For Xcode 15 and Xcode 16, whenever I try to use the Refactor->Rename command I get a spinning busy cursor for a short while then I get an alert that says: Rename Failed Refactoring engine failure. This happens on several projects and I've tried removing the derived data folder, but am at a loss to find additional troubleshooting steps. Are there other files I might remove or reset to get my "Refactoring Engine" back into shape?

I am on MacOs 15.4.1 which is being deployed with an old version of Ruby ruby 2.6.10 and bundler version 1.17.2. I ran pod install after generating the pods with these versions and during the application compilation there have been several issues reported against pods code.

Just wondering if it is possible to configure a secondary macbook to act as a run destination in Xcode, similar to how you would configure an iPhone as a run destination. I have tried connecting my device via USB-C and I can see that my macbook detects the second macbook via USB but it does not show up when trying to add devices in Xcode. I suppose this flow might not be supported?

Hi all, I’m running into a persistent linker error when building my Unity 6 project (IL2CPP, iOS target) that calls a Swift method via an Objective-C++ wrapper. Despite following all known steps, I keep getting: Undefined symbols for architecture arm64: "_placeGeoAnchor", referenced from: _GeoAnchorTrigger_placeGeoAnchor in libGameAssembly.a ... ld: symbol(s) not found for architecture arm64 I’m trying to place a persistent AR anchor at real-world GPS coordinates (so that the same asset can appear at the same location for a returning user). Since I’m targeting iOS, I can’t use Google’s geospatial anchors (but I sooo wish I could--please apple I beg of you stop being so selfish lol). I've already done these things: Swift file is added to Unity-iPhone target. .mm and .h files are in Unity-iPhone target under Compile Sources. Bridging header is set to Unity-iPhone-Bridging-Header.h. Generated header name is correct (GeoTest-Swift.h). Build Active Architecture Only set to No. Function has attribute((visibility("default"))). Unity project uses IL2CPP scripting backend. Yet I'm still getting the same linker error — it appears Unity (via IL2CPP) references the function, but Xcode doesn't link it. It’s something small that’s being missed with how IL2CPP links native symbols? Or maybe I need to explicitly include something in Link Binary With Libraries? I’ve verified symbol visibility and targets repeatedly. I’ve built AR features in Unity before (for Quest), but this is my first time trying to bridge C# → Objective-C++ → Swift in this way for a geolocation-based AR anchor for an iphone. I'm going crazy, I’ve been stuck on this for 12+ hours now, so any insight or nudge would be deeply appreciated. SPECS: Macbook Pro M4 Pro--Sequoia 15.4 Unity 6000.0.45f1 IPhone 11 iOS 18.4 Xcode 15

Hi, I compiled Intel Open Image Denoise library for iOS, and obtained a bunch of dependent dylibs. I want to use these ones in a swift project (via bridging as this is C/C++) targeting the iPad. I understand that it is required to embed these dylibs into frameworks as iOS doesn't allow dylib. Is it necessary to generate one framework for each dylib? If so, how are dependencies between the libraries (and their frameworks) managed? Or, is it possible to generate only one framework embeding all the dependencies?