Hi, We are currently in the process of getting an custom iAP2 device communicating via USB-C. We have been using the 'EADemo' app as a test app to ensure full function before certification. Currently, the device completes the authentication and identification successfully. The device appears within the 'EADemo' app, and we are able to select it and see the available protocol. Selecting the protocol sends the EAStartSession command to the accessory and we ACK it. This is where the issues begin. Attempting to send either a string or hex packet results in nothing being sent. The app does not appear to attempt to send a packet when these are pressed. The 'EADemo' app also does not increment its receive counter when the accessory sends an EA packet, but we do receive the ACK from the device. This indicates the device is receiving the packet, but not processing it in app. Sending the EASessionStatus from the accessory with a status of okay does not change the behavior. Sending the EASessionStatus packet from the accessory with a status of closed results in the device sending an EAStopSession packet. The issue does not appear to be with the accessory or the underlying transport layer. Previous attempts to contact MFi support resulted in them referring me to developer support. Are there any known issues within the 'EADemo' app that we should know about/and or need to fix? Does Apple have any other EA example application? Are there any other publicly avalilbe EA examples that Apple would recommend us trying? Thanks, Mike

Starting March 24, the API is incorrectly returning 302 Moved Temporarily" redirecting the API to Location: https://aninterestingwebsite.com/weatherkit/ This is incorrect, it should be giving an API JSON response as specified by: https://aninterestingwebsite.com/documentation/weatherkitrestapi/get-api-v1-weather-language-latitude-longitude Is this happening for anyone else? Here's reproduction steps curl -vvv -H "Authorization: Bearer YOUR_OWN_TOKEN_HERE" "https://weatherkit.apple.com/api/v1/weather/en/43.741667/-79.373333?dataSets=currentWeather&timezone=UTC&units=si" Here's what the output is: * Host weatherkit.apple.com:443 was resolved. * IPv6: (none) * IPv4: 23.58.127.73, 23.58.127.72, 23.58.127.75, 23.58.127.81, 23.58.127.80, 23.58.127.74, 23.58.127.83, 23.58.127.120, 23.58.127.82 * Trying 23.58.127.73:443... * Connected to weatherkit.apple.com (23.58.127.73) port 443 * ALPN: curl offers h2,http/1.1 * (304) (OUT), TLS handshake, Client hello (1): * CAfile: /etc/ssl/cert.pem * CApath: none * (304) (IN), TLS handshake, Server hello (2): * (304) (IN), TLS handshake, Unknown (8): * (304) (IN), TLS handshake, Certificate (11): * (304) (IN), TLS handshake, CERT verify (15): * (304) (IN), TLS handshake, Finished (20): * (304) (OUT), TLS handshake, Finished (20): * SSL connection using TLSv1.3 / AEAD-CHACHA20-POLY1305-SHA256 / [blank] / UNDEF * ALPN: server accepted http/1.1 * Server certificate: * subject: C=US; ST=California; O=Apple Inc.; CN=weather-data.apple.com * start date: Feb 13 19:20:40 2026 GMT * expire date: Aug 19 17:49:59 2026 GMT * subjectAltName: host "weatherkit.apple.com" matched cert's "weatherkit.apple.com" * issuer: C=US; O=Apple Inc.; CN=Apple Public Server ECC CA 1 - G1 * SSL certificate verify ok. * using HTTP/1.x > GET /api/v1/weather/en/43.741667/-79.373333?dataSets=currentWeather&timezone=UTC&units=si HTTP/1.1 > Host: weatherkit.apple.com > User-Agent: curl/8.7.1 > Accept: */* > Authorization: Bearer ***SNIP*** > * Request completely sent off < HTTP/1.1 302 Moved Temporarily < Server: Apple < Content-Length: 0 < X-Frame-Options: SAMEORIGIN < Strict-Transport-Security: max-age=31536000; includeSubdomains < X-XSS-Protection: 1; mode=block < Access-Control-Allow-Origin: * < X-Content-Type-Options: nosniff < Content-Security-Policy: default-src 'self'; < X-REQUEST-ID: 2f605f12-8331-92fc-c7c1-acfb332b50b6 < X-Apple-Origin: 010decd0-02a4-34fc-8414-ac2bcd4692b9 < Cache-Control: must-revalidate,no-cache,no-store < Location: https://aninterestingwebsite.com/weatherkit/ < Date: Wed, 25 Mar 2026 18:55:51 GMT < X-Cache: TCP_MISS from a23-58-127-87.deploy.akamaitechnologies.com (AkamaiGHost/22.4.4-cf5672731e69c345796af56199edfb50) (-) < Connection: keep-alive < * Connection #0 to host weatherkit.apple.com left intact

Hello, I’m facing an issue with StoreKit where no products are returned in Sandbox. Context: App: SylvoY (Bundle ID: fr.sylvoy.app) Product ID: sylvoy_sylvoy_premium_v2_monthly Type: auto-renewable subscription Build: TestFlight 1.0.16 (Build 20) Device: physical iPhone Environment: Sandbox account Setup: Paid Applications Agreement: Active Banking & Tax: Active Product status: Ready to Submit Product is linked to the current TestFlight build Issue: When fetching products using StoreKit, the returned array is empty: productsCount = 0 products = [] Expected: Product metadata (price, description) should be returned. Actual: No products are returned at all. Additional info: Product identifier is correct Tested on real device (not simulator) Installed via TestFlight Sandbox account properly configured This issue is currently blocking validation of the subscription flow before release. DTS Case-ID: 18968852 (redirected here) Any help would be appreciated.

I am trying to find out about the availability of BLE scanning for advertisements when a watchOS app (on watchOS 26.4 with CoreBluetooth) which starts running a HKWorkoutSession becomes dimmed, ie. due to the user lowering their arm. From my understanding there is still availability for ongoing scanning whilst in the dimmed mode. If this is correct, what settings are required (e.g. using background capability for 'Workout Processing', 'bluetooth-central', etc), and does scanning whilst in background mode limit to requiring service uuids in scanForPeripherals? Also if scanning is throttled, is there an 'estimated' inter scan time? Thanks

Hello, We are testing Wallet passes with iBeacons in iOS 26 Beta. In earlier iOS releases, when a device was in proximity to a registered beacon, the corresponding pass would surface automatically. In iOS 26 Beta, this behavior no longer occurs, even if the pass is already present in Wallet. I have not found documentation of this change in the iOS 26 release notes. Could you please confirm whether this is expected in iOS 26, or if it may be a Beta-specific issue? Any pointers to updated documentation would be appreciated. Thank you.

Just wondering if anyone ran into this issue. I use NetFSMountURLSync for my application with which I allow the user to use a custom path as a mount point (instead of "/Volumes"). This has worked just fine for at least a decade now, but ... since the Tahoe 26.4 "update" mounting to a custom path only generates errors. Note: Mounting to "/Volumes" works correctly (mountpoint = NIL). Since I'm unaware of any changes; is this a bug introduced by Tahoe 26.4, or should I be using a different function to mount a network share?

By analysis the log, seems the following 3 calls has been ended by system callkit (Not mainly trigger the end call): @apple Do you have similar report that the iOS CallKit End the call withtour user action? Device info: iPhone18,1（iPhone 16 Pro） iOS 26.2 RCAppMobile/25.4.30.995 CTRadioAccessTechnologyNR（5G NR）

We're trying to create 26.4 beta and RC VMs on 15.x and 26.3 host OS' without success. We see Tue Mar 17 17:27:36 40 anka.log (install) 45803: failed to install macOS: Error Domain=VZErrorDomain Code=10006 "Installation requires a software update." UserInfo={NSLocalizedFailure=A software update is required to complete the installation., NSLocalizedFailureReason=Installation requires a software update.} Yet, if we create it the same way on 26.4 beta host OS, it works. We've tried the usual tricks of installing latest Xcode and preparing it (accepting license, etc). But, they don't work on 26.3 and 15.x. What's the trick to get the creation of 26.4 to work on <= 26.3 host OS?

I'm trying to implement Unwanted SMS and Calls reporting in an app I'm doing in my idle time. If I place a UITextField or UITextView inside a ILClassificationUIExtensionViewController, every time I select on such control the extension crashes without any logs. The closet idea I have on why it crashes it has something to do with iOS requesting the dictation feature. I'm using the latest (beta 8 at the time) iOS 16.0 beta on my iPhone 13 pro. Attaching my code here if you want to try for yourself: github

Hello dear Apple Platform Engineers, I'm working on an iOS App that connects to a Bluetooth Low Energy Peripheral in the foreground. Whenever the App moves into Background, we want to continue syncing data & therefore implemented State Restoration to be informed about Discovery, Connect, Disconnect or Characteristic changes in the Background in order to wake the App up whenever it was "Terminated due to memory issue". I consulted https://aninterestingwebsite.com/library/archive/documentation/NetworkingInternetWeb/Conceptual/CoreBluetooth_concepts/CoreBluetoothBackgroundProcessingForIOSApps/PerformingTasksWhileYourAppIsInTheBackground.html#//apple_ref/doc/uid/TP40013257-CH7-SW1 for this & assigned: CBCentralManagerOptionRestoreIdentifierKey Reinstantiate the dedicated CentralManager & implemented the centralManager(_ central: CBCentralManager, willRestoreState dict: [String : Any]) Delegate Additionally, I assigned the following keys on connect(_ peripheral: CBPeripheral, options: [String : Any]? = nil) CBConnectPeripheralOptionNotifyOnConnectionKey CBConnectPeripheralOptionNotifyOnDisconnectionKey CBConnectPeripheralOptionNotifyOnNotificationKey However, from my experience the App gets woken up, but neither the willRestoreState nor the didDiscover, didConnect or didDisconnectPeripheral is called even though launchOptions?[UIApplication.LaunchOptionsKey.bluetoothCentrals] as? [String] is not empty. What might I be missing when trying to make this approach work? Thanks a lot for any insights & support!

The production macOS build is showing severe performance problems, while Mac_Dev performs normally. Observed behavior in production Mac build: Issue board scrolling becomes inconsistent or nearly unusable Changing an issue status in detail view is very slow Scrolling the status menu/options can be slow Typing in issue description/notes fields becomes sluggish Dragging issues between milestones/statuses on the board can lag badly Observed behavior in Mac_Dev: Board scrolling is smooth Status changes are immediate Typing in description fields is responsive Drag/drop between milestones works well Important comparison: Mac_Dev appears to run against an isolated local SwiftData store Production Mac app uses the normal CloudKit-backed store Because the same UI is fast in Mac_Dev, this does not look like a pure rendering problem Most likely cause is production store / CloudKit sync churn amplifying existing SwiftUI invalidation and save behavior Current hypothesis: The production app is saving or observing live Issue mutations too aggressively Detail view edits and some quick actions may be causing repeated saves / broad view invalidation Cloud-backed persistence likely makes the problem much worse than the isolated dev store The UI architecture may still need cleanup, but the production data lane is likely a major factor Any help in understanding how best to address this would be helpful.

Development environment: Xcode 26.4, macOS 26.3.1 Run-time configuration: iOS 18.7.6 and higher We have an application running on supervised devices, with an MDM profile typically deployed via jamf. The profile enables a Content Filter, with the two flags "Socket Filter" and "Browser Filter" set to true. On the device side, we implement the content filter as a network extension via: a class FilterDataProvider extending NEFilterDataProvider, a class FilterControlProvider extending NEFilerControlProvider. For the record, the FilterDataProvider overrides the handle*() methods to allow all traffic; the handleNewFlow() simply reports the new connection to FilterControlProvider for analysis. Problem: some customers reported that after a reboot of their device, they would not get access to the internet for up to 60s/90s. We have not been able to reproduce the problem on our own devices. What we see is that, even with our app uninstalled, without any Content Filter, it takes roughly 20s to 25s for a device to have internet access, so we can probably consider this 20s delay as a baseline. But would you be aware of a reason that would explain the delay observed by these customers? More details: We have conducted some tests on our devices, with extended logging. In particular: we have added an internet probe in the app that is triggered when the app starts up: it will try to connect to apple.com every 2s and report success or failure, we also have a network monitor (nw_path_monitor_set_update_handler) that reacts to network stack status updates and logs the said status. A typical boot up sequence shows the following: the boot time is 7:59:05, the app starts up at 7:59:30 (manually launched when the device is ready), the probe fails and keeps failing, the content filter is initialized/started up 7:59:53 and is ready at 7:59:55, the network monitor shows that the network stack is connected (status = nw_path_status_satisfied) right after that, and the probe succeeds in connecting 2s later. In other words, internet is available about 50s after boot time, 25s after app startup (i.e. after the device is actually ready). For some customers, this 25s delay can go up to 60/90s.

I’m working on an iOS Network Extension where a NEPacketTunnelProviderconfigures a local HTTP/HTTPS proxy usingNEPacketTunnelNetworkSettings.proxySettings. Per NEProxySettings.exceptionList docs: If the destination host name of an HTTP connection matches one of these patterns then the proxy settings will not be used for the connection. However, I’m seeing two distinct issues: Issue A (exception bypass not working): HTTPS traffic to a host that matches exceptionList still reaches the proxy. Issue B (domain-scoped proxy not applied): When matchDomains is set to match a specific domain (example: ["googlevideo.com"]), I still observe its traffic in some apps is not proxied. If I remove the domain from matchDomains, the same traffic is proxied. Environment OS: iOS (reproduced with 26.4 and other versions) Devices: Reproduced with several iPhones (likely iPads as well) Xcode: 26.3 Extension: NEPacketTunnelProvider Minimal Repro (code) This is the minimal configuration. Toggle between CONFIG A / CONFIG B to reproduce each issue. import NetworkExtension final class PacketTunnelProvider: NEPacketTunnelProvider { override func startTunnel( options: [String : NSObject]? = nil, completionHandler: @escaping (Error?) -> Void ) { let proxyPort = 12345 // proxy listening port let settings = NEPacketTunnelNetworkSettings(tunnelRemoteAddress: "8.8.8.8") let proxySettings = NEProxySettings() proxySettings.httpEnabled = true proxySettings.httpsEnabled = true proxySettings.httpServer = NEProxyServer(address: "1.2.3.4", port: proxyPort) // proxy listening address proxySettings.httpsServer = NEProxyServer(address: "1.2.3.4", port: proxyPort) // proxy listening address // CONFIG A: proxy all domains, but exclude some domains // proxySettings.matchDomains can be set to match all domains // proxySettings.exceptionList = ["*.cdninstagram.com", "cdninstagram.com"] // CONFIG B: proxy only a specific domain // proxySettings.matchDomains = ["googlevideo.com"] settings.proxySettings = proxySettings setTunnelNetworkSettings(settings) { error in completionHandler(error) } } } Repro steps Issue A (exceptionList bypass not working) Enable the VPN configuration and start the tunnel with CONFIG A (exceptionList = ["*.cdninstagram.com", "cdninstagram.com"]). Open the Instagram app to trigger HTTPS connections to *.cdninstagram.com Inspect proxy logs: cdninstagram.com traffic is still received by the proxy. Safari comparison: If I access URLs that trigger the same *.cdninstagram.com hosts from Safari, it can behave as expected. When the traffic is triggered from the Instagram app, the excluded host still reaches the proxy as CONNECT, which is unexpected. Issue B (matchDomains not applied for YouTube traffic) Start the tunnel with CONFIG B (matchDomains = ["googlevideo.com"]). Open the YouTube app and start playing a video (traffic typically targets *.googlevideo.com). Inspect proxy logs: googlevideo.com traffic is not received by the proxy. Remove the host from matchDomains and observe that googlevideo.com traffic is received by the proxy. Safari comparison: If I access a googlevideo.com host from Safari while matchDomains = ["googlevideo.com"], it behaves as expected (proxied). In contrast, the YouTube app’s googlevideo.com traffic is not proxied unless I match all domains. Expected Issue A Connections to *.cdninstagram.com in the Instagram app should not use the proxy and should not reach the local proxy server. Issue B With matchDomains = ["googlevideo.com"], traffic to *.googlevideo.com (YouTube video traffic) should be proxied and therefore reach the local proxy. Actual Issue A The local proxy still receives the request as: CONNECT scontent-mad1-1.cdninstagram.com:443 HTTP/1.1 So the bypass does not happen. Issue B With matchDomains = ["googlevideo.com"], I still observe googlevideo.com traffic in the YouTube app that is not delivered to the proxy. When all traffic is proxied, the same traffic is delivered to the proxy.

I've been working on an app. It uses iCloud syncing. 48 hours ago everything was working 100%. Make a change on the iPhone it immediately changed on the Mac. Change on the Mac, it immediately changed on the iPhone. I didn't work on it yesterday. I updated to iOS26.4 on the iPhone and 26.4 on the Mac yesterday instead. Today, I pull up the project again. I made NO changes to the code or settings. Make a change on the iPhone it immediately updates on the Mac. Make a change on the Mac, nothing happens on the iPhone. I've waited an hour, and the change never happens. If you leave the iPhone app, then return, it updates as it should. It appears that iCloud's silent notification is to being received by the iPhone. Anyone else having the issue? Is there something new with iOS 26.4 that needs to be adjusted to get this to work? Again, works flawlessly with the Mac, just not with the iPhone.

System-wide deadlock in removexattr from revisiond / APFS We're experiencing a deadlock on certains systems when our software is installed, which is causing side effects in our process (and likely others) such as blocked queues and increased memory usage. According to the spindump, revisiond appears to be holding an exclusive lock within the kernel. Process: revisiond [426] UUID: 5E9B9E04-984B-31AD-A4FF-A1A90B7D53A1 Path: /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Support/revisiond Codesigning ID: com.apple.revisiond Shared Cache: 25AE5A2A-FE2A-3998-8D4E-F3C5C6E6CEB6 slid base address 0x189834000, slide 0x9834000 (System Primary) Architecture: arm64e Parent: launchd [1] UID: 0 Sudden Term: Tracked Memory Limit: 50MB Jetsam Priority: 40 Footprint: 6225 KB Time Since Fork: 1740319s Num samples: 940 (1-940) Num threads: 5 Note: 1 idle work queue thread omitted [...] Thread 0xc0616d 940 samples (1-940) priority 46 (base 4) last ran 241692.754s ago 940 start_wqthread + 8 (libsystem_pthread.dylib + 7068) [0x189d0ab9c] 940 _pthread_wqthread + 292 (libsystem_pthread.dylib + 11852) [0x189d0be4c] 940 _dispatch_workloop_worker_thread + 692 (libdispatch.dylib + 85356) [0x189b65d6c] 940 _dispatch_root_queue_drain_deferred_wlh + 292 (libdispatch.dylib + 87156) [0x189b66474] 940 _dispatch_lane_invoke + 440 (libdispatch.dylib + 45048) [0x189b5bff8] 940 _dispatch_lane_serial_drain + 944 (libdispatch.dylib + 42420) [0x189b5b5b4] 940 _dispatch_client_callout + 16 (libdispatch.dylib + 113364) [0x189b6cad4] 940 _dispatch_call_block_and_release + 32 (libdispatch.dylib + 7004) [0x189b52b5c] 940 ??? (revisiond + 168768) [0x10494d340] 940 ??? (revisiond + 165940) [0x10494c834] 940 ??? (revisiond + 40264) [0x10492dd48] 940 ??? (revisiond + 56680) [0x104931d68] 940 <patched truncated backtrace> 940 removexattr + 8 (libsystem_kernel.dylib + 23768) [0x189cd1cd8] *940 ??? (kernel.release.t6000 + 15240) [0xfffffe000886fb88] *940 ??? (kernel.release.t6000 + 1886348) [0xfffffe0008a3888c] *940 ??? (kernel.release.t6000 + 7730436) [0xfffffe0008fcb504] *940 ??? (kernel.release.t6000 + 2759592) [0xfffffe0008b0dba8] *940 ??? (kernel.release.t6000 + 2808244) [0xfffffe0008b199b4] *940 apfs_vnop_removexattr + 1044 (apfs + 474512) [0xfffffe000be8d4d0] *940 decmpfs_cnode_set_vnode_state + 80 (kernel.release.t6000 + 2945816) [0xfffffe0008b3b318] *940 IORWLockWrite + 184 (kernel.release.t6000 + 496184) [0xfffffe00088e5238] *940 ??? (kernel.release.t6000 + 494624) [0xfffffe00088e4c20] *940 ??? (kernel.release.t6000 + 619452) [0xfffffe00089033bc] *940 ??? (kernel.release.t6000 + 624472) [0xfffffe0008904758] The bulk of the other processes are waiting for that lock. (suspended, blocked by krwlock for reading owned by revisiond [426] thread 0xc0616d) (blocked by krwlock for writing owned by revisiond [426] thread 0xc0616d) Around the time of the event, these messages were logged by revision: 2026-03-06 18:49:37.781673-0500 0x16b7 Error 0x7f92f364 426 14 revisiond: [com.apple.revisiond:default] [ERROR] CSCopyChunkIDsForToken failed for 41639 2026-03-06 18:49:37.781716-0500 0x16b7 Error 0x7f92f365 426 14 revisiond: [com.apple.revisiond:default] [ERROR] updateEntry for new entry <private> failed 2026-03-06 18:49:37.781738-0500 0x16b7 Error 0x7f92f366 426 14 revisiond: [com.apple.revisiond:default] [ERROR] no entry for '<private>' 2026-03-06 18:49:37.781754-0500 0x16b7 Error 0x7f92f367 426 14 revisiond: [com.apple.revisiond:default] [ERROR] failed assembleInfoForOffset for fsid 16777234 fileid 359684022 offset 0 size 14334 (path <private>) Our agent uses Endpoint Security Framework to monitor events, and provide anti-tamper functionality for installed components and processes. While several EndpointSecurity calls appear in the spindump stack traces, we don't have any evidence that any calls from revisiond were blocked. What we'd really like to to understand what that lock is (appears to be decompressing an object on an APFS volume), what revisiond and APFS are doing with it, and what might cause it to deadlock. Of note, one of our processes is also waiting on that lock, one thread for reading and the other for writing. This issue affects machines running several macOS versions (15.x, 26.x). The machine in the examples is running macOS 26.3 (25D125)

I haven’t been able to get this to work at any level! I’m running into multiple issues, any light shed on any of these would be nice: I can’t implement a bloom filter that produces the same output as can be found in the SimpleURLFilter sample project, after following the textual description of it that’s available in the documentation. No clue what my implementation is doing wrong, and because of the nature of hashing, there is no way to know. Specifically: The web is full of implementations of FNV-1a and MurmurHash3, and they all produce different hashes for the same input. Can we get the proper hashes for some sample strings, so we know which is the “correct” one? Similarly, different implementations use different encodings for the strings to hash. Which should we use here? The formulas for numberOfBits and numberOfHashes give Doubles and assign them to Ints. It seems we should do this conversing by rounding them, is this correct? Can we get a sample correct value for the combined hash, so we can verify our implementations against it? Or ignoring all of the above, can we have the actual code instead of a textual description of it? 😓 I managed to get Settings to register my first attempt at this extension in beta 1. Now, in beta 2, any other project (including the sample code) will redirect to Settings, show the Allow/Deny message box, I tap Allow, and then nothing happens. This must be a bug, right? Whenever I try to enable the only extension that Settings accepted (by setting its isEnabled to true), its status goes to .stopped and the error is, of course, .unknown. How do I debug this? While the extension is .stopped, ALL URL LOADS are blocked on the device. Is this to be expected? (shouldFailClosed is set to false) Is there any way to manually reload the bloom filter? My app ships blocklist updates with background push, so it would be wasteful to fetch the filter at a fixed interval. If so, can we opt out of the periodic fetch altogether? I initially believed the API to be near useless because I didn’t know of its “fuzzy matching” capabilities, which I’ve discovered by accident in a forum post. It’d be nice if those were documented somewhere! Thanks!!

I have a FetchDescriptor that uses starts(with:) which works fine in debug builds but crashes in TestFlight and archive. For background information I'm using iCloud and model inheritance where the property being used in fetch descriptor is defined on the superclass, the fetch descriptor is for the subclass. Implementation: static func fetchDescriptor(nameStartingWith prefix: String) -> FetchDescriptor<ColorAsset> { let predicate = #Predicate<ColorAsset> { asset in asset.name.starts(with: prefix) } return FetchDescriptor<ColorAsset>(predicate: predicate) } @Model public class Asset: Identifiable { // MARK: - Properties var name: String = "" .... } @available(macOS 26.0, *) @Model public class ColorAsset: Asset { ... }

Are there some requirements to use Notification Content Extensions other than including the target to my iOS app? I have done it, configured it to match a certain category of notifications, but my custom interface doesn’t show up. is there anything I need to configure on my main app? Is that anything that should be changed there, such as disabking its botifications handling? is there any requirement concerning the payload? I tried to disable time sensitive and content-available notifications, but it didn’t help.

We have an app that controls InDesign Desktop and InDesignServer via hundreds of AppleScripts. Some macOS security updates a while back dictated that we start communicating with other apps via ScriptingBridge. We couldn't afford to convert the hundreds of AppleScripts into direct ScriptingBridge nomenclature, so we opted to keep them as is and instead tell the external apps to: [app doScript:<the script text> language:InDesignScLgApplescriptLanguage withArguments:nil undoMode:InDesignESUMScriptRequest undoName:@"blah"] There are a handful of scripts that we did convert to direct ScriptingBridge. There are times (and under the right circumstances, it's repeatable) when a certain script will have run perfectly dozens of times, and then it will throw errOSAInternalTableOverflow. We create a new SBApplication for every job (which could be a single instance of Desktop or the multiple instances of Server). Why is this error happening seemingly randomly? Is there anything we can do to work around or prevent this?

Hello, I have an app that is using iOS 26 Network Framework APIs. It is using QUIC, TLS 1.3 and Bonjour. For TLS I am using a PKCS#12 identity. All works well and as expected if the devices (iPhone with no cellular, iPhone with cellular, and iPad no cellular) are all on the same wifi network. If I turn off my router (ie no more wifi network) and leave on the wifi toggle on the iOS devices - only the non cellular iPhone and iPad are able to discovery and connect to each other. My iPhone with cellular is not able to. By sharing my logs with Cursor AI it was determined that the connection between the two problematic peers (iPad with no cellular and iPhone with cellular) never even makes it to the TLS step because I never see the logs where I print out the certs I compare. I tried doing "builder.requiredInterfaceType(.wifi)" but doing that blocked the two non cellular devices from working. I also tried "builder.prohibitedInterfaceTypes([.cellular])" but that also did not work. Is AWDL on it's way out? Should I focus my energy on Wi-Fi Aware? Regards, Captadoh