I have migrated my code to use SMAppService but am running into trouble deleting the old SMJobBless launchd registration using launchd remove. I am invoking this from a root shell when I detect the daemon and associated plist still exist, then also deleting those files. The remove seems to work (i.e. no errors returned) but launchd list shows the service is registered, with a status code of 28 I am using the same label for SMAppService as previously and suspect this is the reason for the problem. However, I am reluctant to change the label as there will a lot of code changes to do this. If I quit my application, disable the background job in System Settings and run sudo launchd remove in the Terminal then it is removed and my application runs as expected once the background job is re-enabled. Alternatively, a reboot seems to get things going. Any suggestions on to how I could do this more effectively welcome.

Hello, I am working on a cross-platform application where IPC between a LaunchDaemon and a LaunchAgent is implemented via Unix domain sockets. On macOS, the socket path length is restricted to 104 characters. What is the Apple-recommended directory for these sockets to ensure the path remains under the limit while allowing a non-sandboxed agent to communicate with a root daemon? Standard paths like $TMPDIR are often too long for this purpose. Thank you in advance!

Hi, I’m looking for clarification on what concurrency and consistency guarantees Apple provides when multiple targets (main app + Widget extensions) access shared storage. Specifically: 1. UserDefaults (App Group / suiteName:) • If multiple processes (app + multiple widget instances) read and write the same shared UserDefaults, what guarantees are provided? • Is access serialized internally to prevent corruption? • Are read–modify–write operations safe across processes, or can lost updates occur? 2. Core Data (shared SQLite store in App Group container) • Is it officially supported for multiple processes to open and write to the same Core Data SQLite store? • Are there recommended configurations (e.g. WAL mode) for safe multi-process access? • Is Apple’s recommendation to have a single writer process? 3. FileManager (shared container files) • If two processes write to the same file in an App Group container, what guarantees are provided by the system? • Is atomic replaceItemAt the recommended pattern for safe cross-process updates? Additionally: • Do multiple widget instances count as separate processes with respect to these guarantees? • Is there official guidance on best practices for shared persistence between app and widget extensions? I want to ensure I’m following the correct architecture and not relying on undefined behavior. Thanks.

Hello, I have an application that needs to be published to the App Store. This application consists of two processes, A and B, where B is a child process of A. I found that if process B needs to be launched as a child process of A in sandbox mode, it is necessary to set the following keys in the entitlements.plist file: <key>com.apple.security.app-sandbox</key><true/><key>com.apple.security.inherit</key><true/> However, after setting these keys, process B can no longer be launched directly. This issue is particularly prominent because process B has a window and a Dock icon — in this case, if the user pins the Dock icon, they will be unable to launch process B. Could you please advise on a solution to this problem?

The expirationHandler on BGProcessingTask is a () -> Void closure. It provides no information about why it was called. In my testing, all of the following trigger the same handler: Time expiration Resource pressure (CPU, memory, battery) Not reporting progress User tapping "Stop" on the Live Activity There is no way for the app to tell these apart. Questions: Q1. Is there an official, complete list of all conditions that trigger expirationHandler? The documentation only mentions "time expires." Q2. What is the specific time limit before timeout? If it varies by device state, what are the conditions? Q3. A way to distinguish the reason is needed. "User stop" and "system expiration" require completely different handling. Currently this is impossible. Environment: iOS 26, physical device

The expirationHandler on BGProcessingTask is a () -> Void closure. It provides no information about why it was called. In my testing, all of the following trigger the same handler: Time expiration Resource pressure (CPU, memory, battery) Not reporting progress User tapping "Stop" on the Live Activity There is no way for the app to tell these apart. Questions: Q1. Is there an official, complete list of all conditions that trigger expirationHandler? The documentation only mentions "time expires." Q2. What is the specific time limit before timeout? If it varies by device state, what are the conditions? Q3. A way to distinguish the reason is needed. "User stop" and "system expiration" require completely different handling. Currently this is impossible. Environment: iOS 26, physical device

I'm working on securing communication between an Authorization Plugin and an XPC daemon, and I’d appreciate some guidance on best practices and troubleshooting. The current design which, I’ve implemented a custom Authorization Plugin for step-up authentication, which is loaded by Authorization Services at the loginwindow (inside SecurityAgent). This plugin acts as an XPC client and connects to a custom XPC daemon. Setup Details 1. XPC Daemon Runs as root (LaunchDaemon) Not sandboxed (my understanding is that root daemons typically don’t run sandboxed—please correct me if this is wrong) Mach service: com.roboInc.AuthXpcDaemon Bundle identifier: com.roboInc.OfflineAuthXpcDaemon 2. Authorization Plugin Bundle identifier: com.roboInc.AuthPlugin Loaded by SecurityAgent during login 3. Code Signing Both plugin and daemon are signed using a development certificate What I’m Trying to Achieve I want to secure the XPC communication so that: The daemon only accepts connections from trusted clients The plugin only connects to the legitimate daemon Communication is protected against unauthorized access The Issue I'm facing I attempted to validate code signatures using: SecRequirementCreateWithString SecCodeCopyGuestWithAttributes SecCodeCheckValidity However, validation consistently fails with: -67050 (errSecCSReqFailed) Could you please help here What is the recommended way to securely authenticate an Authorization Plugin (running inside SecurityAgent) to a privileged XPC daemon? Since the plugin runs inside SecurityAgent, how can the daemon reliably distinguish my plugin from other plugins? What is the correct approach to building a SecRequirement in this scenario? Any guidance, examples, or pointers would be greatly appreciated. Thanks in advance!

(! status in pluginkit, FinderSyncExtensionHost process missing) macOS Version: 26.3.1 Beta (25D771280a) Xcode Version: 16.3 (17C529) Steps to reproduce: Create a Finder Sync Extension project Build and install to /Applications Enable in System Settings → Extensions → Finder Extensions Extension shows ! in pluginkit output FinderSyncExtensionHost process never starts Context menu never appears in Finder Expected: Extension loads and context menu appears Actual: Extension marked with ! in pluginkit, no process launched pluginkit output: ! com.github.astronautJack.EasyNewFile.EasyNewFileExtension(1.0)

Hello, I am developing a macOS Launch Daemon (packaged as a bundle) that acts as an XPC server. For debugging purposes, I am trying to run the daemon's executable directly from the terminal via sudo ./mydaemon.app/Contents/MacOS/myexecutable. Initially, I added the com.apple.security.application-groups entitlement to the daemon. However, when starting the process, it failed to create the XPC service with the following errors: Unsatisfied entitlements: com.apple.security.application-groups Soft-restriction provisioning profile validation failure: Error Domain=AppleMobileFileIntegrityError Code=-413 "No matching profile found" UserInfo={NSURL=, unsatisfiedEntitlements=, NSLocalizedDescription=No matching profile found} listener failed to activate: xpc_error=[1: Operation not permitted] To resolve the profile validation failure, I registered a new App Group in the Apple Developer Portal, generated a new provisioning profile for the daemon that includes this group, and embedded it into the bundle (Contents/embedded.provisionprofile). Now, the previous profile error is gone, but I am getting a new identity conflict error, and the XPC listener still fails: Two equal instances have unequal identities. <anon<myproc_name>(501) pid=2818 AUID=501> and <anon<myproc_name>(501)(262) pid=2818 AUID=262> listener failed to activate: xpc_error=[1: Operation not permitted] My questions are: What exactly causes the Two equal instances have unequal identities error? I noticed the Audit UID difference (AUID=501 vs AUID=262). Why does NSXPCListener still fail with Operation not permitted? What is the recommended workflow for debugging a Launch Daemon that requires an App Group provisioning profile for XPC communication? Thank you in advance!

General: Forums subtopic: App & System Services > Processes & Concurrency Forums tag: Background Tasks Background Tasks framework documentation UIApplication background tasks documentation ProcessInfo expiring activity documentation Using background tasks documentation for watchOS Performing long-running tasks on iOS and iPadOS documentation WWDC 2020 Session 10063 Background execution demystified — This is critical resource. Watch it! [1] WWDC 2022 Session 10142 Efficiency awaits: Background tasks in SwiftUI WWDC 2025 Session 227 Finish tasks in the background — This contains an excellent summary of the expected use cases for each of the background task types. iOS Background Execution Limits forums post UIApplication Background Task Notes forums post Testing and Debugging Code Running in the Background forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] Sadly the video is currently not available from Apple. I’ve left the link in place just in case it comes back.

Service Management framework supports installing and uninstalling services, including Service Management login items, launchd agents, and launchd daemons. General: Forums subtopic: App & System Services > Processes & Concurrency Forums tag: Service Management Service Management framework documentation Daemons and Services Programming Guide archived documentation Technote 2083 Daemons and Agents — It hasn’t been updated in… well… decades, but it’s still remarkably relevant. EvenBetterAuthorizationSample sample code — This has been obviated by SMAppService. SMJobBless sample code — This has been obviated by SMAppService. Sandboxing with NSXPCConnection sample code WWDC 2022 Session 10096 What’s new in privacy introduces the new SMAppService facility, starting at 07˸07 BSD Privilege Escalation on macOS forums post Getting Started with SMAppService forums post Background items showing up with the wrong name forums post Related forums tags include: XPC, Apple’s preferred inter-process communication (IPC) mechanism Inter-process communication, for other IPC mechanisms Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

XPC is the preferred inter-process communication (IPC) mechanism on Apple platforms. XPC has three APIs: The high-level NSXPCConnection API, for Objective-C and Swift The low-level Swift API, introduced with macOS 14 The low-level C API, which, while callable from all languages, works best with C-based languages General: Forums subtopic: App & System Services > Processes & Concurrency Forums tag: XPC Creating XPC services documentation NSXPCConnection class documentation Low-level API documentation XPC has extensive man pages — For the low-level API, start with the xpc man page; this is the original source for the XPC C API documentation and still contains titbits that you can’t find elsewhere. Also read the xpcservice.plist man page, which documents the property list format used by XPC services. Daemons and Services Programming Guide archived documentation WWDC 2012 Session 241 Cocoa Interprocess Communication with XPC — This is no longer available from the Apple Developer website )-: Technote 2083 Daemons and Agents — It hasn’t been updated in… well… decades, but it’s still remarkably relevant. TN3113 Testing and Debugging XPC Code With an Anonymous Listener technote XPC and App-to-App Communication forums post Validating Signature Of XPC Process forums post This forums post summarises the options for bidirectional communication This forums post explains the meaning of the privileged flag XPC is mostly used on macOS but there are a few places where it comes into play on iOS: File Provider extensions can export an XPC service to arbitrary apps. For more about the File Provider side of this, see the NSFileProviderServiceSource protocol. For more about the client side, see the NSFileProviderService class. An app can move part of its code into a helper extension and talk to it using XPC. See Creating enhanced security helper extensions. Alternative browser engines can do a similar thing. See BrowserEngineKit for more about this. Apps with embedded extensions can use XPC via ExtensionFoundation. (Note that on iOS, but not macOS, an app can only use extensions embedded within the app itself.) Related tags include: Inter-process communication, for other IPC mechanisms Service Management, for installing and uninstalling Service Management login items, launchd agents, and launchd daemons Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

Swift Concurrency Resources: Forums tags: Concurrency The Swift Programming Language > Concurrency documentation Migrating to Swift 6 documentation WWDC 2022 Session 110351 Eliminate data races using Swift Concurrency — This ‘sailing on the sea of concurrency’ talk is a great introduction to the fundamentals. WWDC 2021 Session 10134 Explore structured concurrency in Swift — The table that starts rolling out at around 25:45 is really helpful. Swift Async Algorithms package Swift Concurrency Proposal Index DevForum post Why is flow control important? forums post Dispatch Resources: Forums tags: Dispatch Dispatch documentation — Note that the Swift API and C API, while generally aligned, are different in many details. Make sure you select the right language at the top of the page. Dispatch man pages — While the standard Dispatch documentation is good, you can still find some great tidbits in the man pages. See Reading UNIX Manual Pages. Start by reading dispatch in section 3. WWDC 2015 Session 718 Building Responsive and Efficient Apps with GCD [1] WWDC 2017 Session 706 Modernizing Grand Central Dispatch Usage [1] Avoid Dispatch Global Concurrent Queues forums post Waiting for an Async Result in a Synchronous Function forums post Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" [1] These videos may or may not be available from Apple. If not, the URL should help you locate other sources of this info.

Let's image that someone wants to use a background service to keep track of FSEvents activity, at the file level (a firehose, some might say). I choose this example, to indicate the volume and rate of data transmission in question. I'm not creating a front-end for FSEvents data, but my background service may generate data at a similar pace. The service runs off of user defined document/s that specify the FSEvent background filtering to be applied. Those that match get stored into a database. But filters can match on almost all the data being emitted by FSEvents. The user decides to check on the service's activity and database writes by launching a GUI that sends requests to the background service using XPC. So the GUI can request historic data from a database, but also get a real-time view of what FS events the service is busy filtering. So it's a client-server approach, that's concerned with monitoring an event stream over XPC. I understand XPC is a request/response mechanism, and I might look into using a reverse connection here, but my main concern is one of performance. Is XPC capable of coping with such a high volume of data transmision? Could it cope with 1000s of rows of table data updates per second sent to a GUI frontend? I know there are streaming protocol options that involve a TCP connection, but I really want to stay away from opening sockets.

My load average on a largely idle system is around 22, going up to 70 or so periodically; SSMenuAgent seems to be consuming lots of CPU (and, looking at spindump, it certainly seems busy), but... it's not happening on any other system whose screens I am observing. (Er, I know about load average limitations, the process is also consuming 70-98% CPU according to both top and Activity Monitor.) Since this machine (although idle) has our network extension, I'm trying to figure out if this is due to that, or of this is generally expected. Anyone?

I'm working on implementing file moving with NSFileCoordinator. I'm using the slightly newer asynchronous API with the NSFileAccessIntents. My question is, how do I go about notifying the coordinator about the item move? Should I simply create a new instance in the asynchronous block? Or does it need to be the same coordinator instance? let writeQueue = OperationQueue() public func saveAndMove(data: String, to newURL: URL) { let oldURL = presentedItemURL! let sourceIntent = NSFileAccessIntent.writingIntent(with: oldURL, options: .forMoving) let destinationIntent = NSFileAccessIntent.writingIntent(with: newURL, options: .forReplacing) let coordinator = NSFileCoordinator() coordinator.coordinate(with: [sourceIntent, destinationIntent], queue: writeQueue) { error in if let error { return } do { // ERROR: Can't access NSFileCoordinator because it is not Sendable (Swift 6) coordinator.item(at: oldURL, willMoveTo: newURL) try FileManager.default.moveItem(at: oldURL, to: newURL) coordinator.item(at: oldURL, didMoveTo: newURL) } catch { print("Failed to move to \(newURL)") } } }

Hi, I have some questions regarding the Background Assets Extension and DeviceCheck framework. Goal: Ensure that only users who have purchased the app can access the server's API without any user authentication using for example DeviceCheck framework and within a Background Assets Extension. My app relies on external assets, which I'm loading using the Background Assets Extension. I'm trying to determine if it's possible to obtain a challenge from the server and send a DeviceCheck assertion during this process within the Background Assets Extension. So far, I only receive session-wide authentication challenges—specifically NSURLAuthenticationMethodServerTrust in the Background Assets Extensio. I’ve tested with Basic Auth (NSURLAuthenticationMethodHTTPBasic) just for experimentation, but the delegate func backgroundDownload( _ download: BADownload, didReceive challenge: URLAuthenticationChallenge ) async -> (URLSession.AuthChallengeDisposition, URLCredential?) is never called with that authentication method. It seems task-specific challenges aren't coming through at all. Also, while the DCAppAttestService API appears to be available on macOS, DCAppAttestService.isSupported always returns false (in my testing), which suggests it's not actually supported on macOS. Can anyone confirm if that’s expected behavior?

Hello! I'm writing a System Extension that is an Endpoint Security client. And I want to Deny/Allow executing some XPC Service processes (using the ES_EVENT_TYPE_AUTH_EXEC event) depending on characteristics of a process that starts the XPC Service. For this purpose, I need an API that could allow me to obtain an execution context of the XPC Service process. I can obtain this information using the "sudo launchctl procinfo <pid>" command (e.g. I can use the "domain = pid/3428" part of the output for this purpose). Also, I know that when the xpcproxy process is started, it gets as the arguments a service name and a pid of the process that requests the service so I can grasp the execution context from xpcproxy launching. But are these ways to obtain this info legitimate?

When I search, it's always people trying to do stuff in the background. I want my app to only do stuff when it is active. And this post https://aninterestingwebsite.com/forums/thread/685525 seems to have prevented replies from the start. Which means it's just a documentation page and does not belong in the discussion forums at all, because it prevents all discussion.

I am building a Mac app that launch a GUI helper app and use XPC to communicate between them. Main app start a XPC Listener using NSXPCListener(machServiceName: "group.com.mycompany.myapp.xpc") Launch the helper app Helper app connect to the XPC service and listen command from main app. What I observe is the app seems can start XPC listener while I run it via Xcode. If I run the app using TestFlight build, or via the compiled debug binary (same one that I use on Xcode), it cannot start the XPC service. Here is what I see in the Console: [0x600000ef7570] activating connection: mach=true listener=true peer=false name=group.com.mycompany.myapp.xpc [0x600000ef7570] listener failed to activate: xpc_error=[1: Operation not permitted] Both main app and helper app are sandboxed and in the same App Group - if they were not, I cannot connect the helper app to main app. I can confirm the entitlement profiles did contain the app group. If I start the main app via xcode, and then launch the helper app manually via Finder, the helper app can connect to the XPC and everything work. It is not related to Release configuration, as the same binary work while I am debugging, but not when I open the binary manually. For context, the main app is a Catalyst app, and helper app is an AppKit app. To start a XPC listener on Catalyst, I had do it in a AppKit bridge via bundle. Given the app worked on Xcode, I believe this approach can work. I just cannot figure out why it only work while I am debugging. Any pointer to debug this issue is greatly appreciated. Thanks!