Notifications

RSS for tag

Learn about the technical aspects of notification delivery on device, including notification types, priorities, and notification center management.

Notifications Documentation

Posts under Notifications subtopic

Post

Replies

Boosts

Views

Activity

What is the expected behavior for a notification service extension if the user has not been prompted for requestAuthorization()
If an iOS application has a notification service extension which gets sent a push, but the user has not been prompted for notification authorization via requestAuthorization() then what is the expected behavior? Will the push get delivered to the NSE but the resulting notification not displayed? Or will the push not get delivered at all to the NSE?
3
0
152
Sep ’25
APNs Feedback Service Domain Unavailable
The APNs Feedback Service domain “feedback.push.apple.com” was deprecated on March 31, 2021, and became unavailable after August 2025 due to domain name resolution failures. Will this feedback service become available again in the future? Also, is it possible to use the APNs Feedback Service with a domain different from “feedback.push.apple.com”?
1
0
76
Sep ’25
iOS doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an APNs PUSH
I am developing an application that uses NetworkExtension (Local PUSH function) And VoIP(APNs) PUSH. Nowadays, I found a problem on this app doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an APNs PUSH. My confimation result of my app and server log is below. 11:00 AM: my server(PBX) requests a VoIP(APNs) PUSH notification to the APNs. But my app does not receive the VoIP(APNs) PUSH. At this time, my app is running on LAN (Wi-Fi without internet connection), as a result, NetworkExtension was running. so I think this is normal behaviour. 14:55:11 PM: There is an incoming call from the my server(PBX) via local net, and NetworkExtension calls iOS API(API name is reportIncomingCall). However, iOS does not call the delegate didReceiveIncomingCallWithUserInfo for the reportIncomingCall. 14:55:11 PM: At almost the same time, iOS calls the delegate cdidReceiveIncomingPushWithPayload of VoIP PUSH. (instead of call the delegate didReceiveIncomingCallWithUserInfo for the reportIncomingCall?) And the content of this VoIP(APNs) PUSH was the incoming call at "11:00 AM". In other words, the VoIP(APNs) PUSH at 11:00 AM is stuck inside iOS, and at 14:55:11 PM, from NetworkExtension reports it. I feel there is a problem on iOS doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an VoIP(APNs) PUSH. Would you tell me Apple's opioion about this? If this is known problem, Please tell me about it.
7
0
1.2k
Feb ’26
Persistent iOS Signing & UIBackgroundModes Entitlement Issue
Problem Statement We are experiencing a critical and persistent issue preventing the successful signing and building of our iOS application. The core problem is that provisioning profiles, whether automatically generated by Xcode or manually created in the Apple Developer Portal, consistently fail to include the UIBackgroundModes entitlement, leading to a build failure. Specific Question Why are provisioning profiles generated via the Apple Developer Portal and/or Xcode's automatic signing process consistently omitting the UIBackgroundModes entitlement for our App ID, even when this capability is explicitly configured in Xcode? We seek guidance or backend intervention to ensure our provisioning profiles include the necessary entitlement. Expected Outcome We expect to be able to successfully build and sign our iOS application, with provisioning profiles that correctly include the UIBackgroundModes entitlement, allowing for proper implementation of remote notifications. Observed Symptoms Primary Build Error: Consistent build failure with the exact error message: "Automatic signing failed: Provisioning profile 'iOS Team Provisioning Profile: com.scott.ultimatefix' doesn't include the UIBackgroundModes entitlement." Missing Entitlement in Profile (Confirmed by Inspection): Direct inspection of downloaded .mobileprovision files (including those manually generated in the Developer Portal for com.scott.ultimatefix) consistently shows the absence of the UIBackgroundModes entry within the section of the Entitlements dictionary. The aps-environment key for Push Notifications is present, indicating Push Notifications are enabled, but Background Modes are not. Certificates Correctly Recognized in Xcode: Our "Apple Development: Stephen Criscell Scott" and "Apple Distribution: Stephen Criscell Scott" certificates are correctly displayed and recognized in both Keychain Access and Xcode's Preferences > Accounts > Manage Certificates window (without "Not in Keychain" status). Furthermore, the Signing & Capabilities tab for the target in Xcode now correctly shows Signing Certificate: Apple Development: Stephen Criscell Scott. Persistent Issue Across Resets: The problem persists despite extensive local cache invalidation, Xcode reinstallation, and even testing in a fresh macOS user account (which confirmed the issue was not user-specific).
1
0
141
Jun ’25
Local-only iOS Notifications
Hello! I'm currently trying to add local push notifications to my iOS app (React Native + Expo). Most of the guides and documentation I found online revolve around remote notification capabilities and APNS - I don't need this. The app will register a background task to periodically check if it should trigger a notification, fully local. I'm running into issues when adding the push notification capabilities, saying I need a new provisioning profile and to modify the App ID, which prompts me to set up certificates to communicate with APNS - which I don't need. So I was wondering: Is it possible to build an app without the remote notification setup that can still trigger local notifications? Or is it kind of all-or-nothing, and I need to set up remote notifications as well even if I only need to trigger them locally? Couldn't really find much online about this, and before I invalidate my current certificates and go through a bunch of redundant setup, I thought I'd ask here. Help would be greatly appreciated! Thank you!
2
0
92
Jun ’25
Notification easy control
Dear Apple Team, I hope this message finds you well. I wanted to share a playful and innovative idea that could enhance the iPhone experience—particularly when viewing content in full-screen mode through apps like Apple TV or YouTube. Feature Concept: Hands-Free Dismissal of Notifications When the iPhone is in landscape mode, incoming notifications can interrupt the viewing experience. While Focus Mode and swipe gestures help, I thought of a more intuitive and hands-free interaction: using a light puff of air directed toward the screen to dismiss a notification. This interaction could use the microphone or other onboard sensors to detect a brief burst of air, providing a fun and natural way to maintain immersion without touching the device. If this isn’t feasible with current hardware, here are a few alternative concepts that align with the same goal: Blink to Dismiss: Using Face ID sensors to detect a quick blink as a hands-free gesture. Shake to Dismiss: A gentle shake gesture when holding the iPhone in one hand. Gaze-Based Dismissal: Notifications automatically disappear after a brief moment of eye contact. These ideas could offer both accessibility benefits and a touch of delight—making the iPhone feel even more magical and responsive. Thank you for your time and for considering this suggestion! Warm regards, Badhan Baidya
1
0
174
Sep ’25
APNS notifications of apns-push-type pushtotalk sometimes stop arriving after switching networks
PLATFORM AND VERSION: iOS Development environment: Other: .net MAUI with vscode Run-time configuration: iOS 18.1.1 DESCRIPTION OF PROBLEM APNS notifications of apns-push-type pushtotalk sometimes stop arriving after switching networks. STEPS TO REPRODUCE We have created a simple app which can be used to deminstrate this issue. When you launch the app it displays the APNS token which you can then use fromn the Apple Push Console to manually send it PTT push notifications. https://github.com/trampster/PttPushNotificationIssue On an iPhone SE (we havn't been able to reproduce on our iPhone 11) Start the APP to register for the APNS push notifications Turn off the WiFi wait for 5 seconds Attempt a push to the app manually using the Push Notifications Console (this should fail, which is fine) Turn on Cellular and wait for it to connect Attempt to push to the app manually using the Push Notifications Console -> This fails, and all attempts to send an pushtotalk push notifications fail until the we switch network again. Send a push while offline before connecting to the new network seems to make it happen more often but hard to tell for sure. The results of the failed push in the console look like this: Delivery LogLast updated: 30/01/25, 16:45:06 GMT+13 Refresh 30 Jan 2025, 16:45:03.661 GMT+13 received by APNS Server 30 Jan 2025, 16:45:03.662 GMT+13 discarded as device was offline The device is actually very much online. Switching networks again oftern makes things come right. But it doesn't seem to come right by itself. We can't respond to network changes and do anything as the whole point of using push-to-talk push notifications is to wake up the app when in the background to answer a call, this means we are not running and therefore cannot respond to network changes to try to work arround this issue.
6
0
682
Apr ’25
Why are non-critical notifications quieter than critical alerts at max volume?
When I turn the Ringtone and Alerts volume all the way up, I expect standard notifications to play at the loudest level the device allows. In theory, this should match the volume of a critical alert with its sound.volume set to 1.0 in payload. However, I’ve noticed that non-critical notifications still play quieter than critical alerts under these conditions. Critical alerts with volume: 1.0 sound noticeably louder than standard notifications, even though the Ringtone and Alerts slider is already set to maximum. And I couldn't find a documentation for this behavior anywhere. Is this expected behavior on iOS? And is there any way to make non-critical notifications play at the same maximum loudness as critical alerts? Thanks in advance for any clarification.
3
0
245
Sep ’25
UNNotificationServiceExtension Not Displaying Sender Image
I created a Notification Service Extension to display profile images in place for the app image (i.e. iMessage). I send a remote push notification via Firebase Functions, and in the payload, the relevant profile image url string. The profile image url string in the payload is successfully delivered as it appears in my console log and AppDelegate didReceiveRemoteNotification function. My problem is the profile image does not replace the default app icon image in the remote push notification. Below is my configuration. Any guidance would be appreciated! Main target app: the info plist contains NSUSerActivityTypes = [INSendMessageIntent]. The Communications Notifications capability is enabled and "Copy only when installing" in Build Phases Embed Foundation Extensions Notification Service Extension plist: contains NSExtension > NSExtensionAttributes > IntentsSupported > INSendMessageIntent. Notification Service Extension class code: var contentHandler: ((UNNotificationContent) -> Void)? var bestAttemptContent: UNMutableNotificationContent? override func didReceive(_ request: UNNotificationRequest, withContentHandler contentHandler: @escaping (UNNotificationContent) -> Void) { self.contentHandler = contentHandler bestAttemptContent = (request.content.mutableCopy() as? UNMutableNotificationContent) guard var bestAttemptContent = bestAttemptContent else { return } guard let fcmOptions = bestAttemptContent.userInfo["fcm_options"] as? [String: Any], let attachmentUrlAsString = fcmOptions["imageURL"] as? String else { contentHandler(bestAttemptContent) return } if let attachmentUrl = URL(string: attachmentUrlAsString) { var senderNameComponents = PersonNameComponents() senderNameComponents.nickname = bestAttemptContent.title let profileImage = INImage(url: attachmentUrl) let sender = INPerson(personHandle: INPersonHandle(value: "1233211234", type: .unknown), nameComponents: senderNameComponents, displayName: bestAttemptContent.title, image: profileImage, contactIdentifier: nil, customIdentifier: nil, isMe: false) let receiver = INPerson(personHandle: INPersonHandle(value: "1233211234", type: .unknown), nameComponents: nil, displayName: nil, image: nil, contactIdentifier: nil, customIdentifier: nil, isMe: true) let intent = INSendMessageIntent( recipients: [receiver], outgoingMessageType: .outgoingMessageText, content: "Test", speakableGroupName: INSpeakableString(spokenPhrase: "Sender Name"), conversationIdentifier: "sampleConversationIdentifier", serviceName: nil, sender: sender, attachments: nil ) intent.setImage(profileImage, forParameterNamed: \.sender) let interaction = INInteraction(intent: intent, response: nil) interaction.direction = .incoming interaction.donate(completion: nil) if #available(iOSApplicationExtension 15.0, *) { do { bestAttemptContent = try bestAttemptContent.updating(from: intent) as! UNMutableNotificationContent } catch { contentHandler(bestAttemptContent) return } } contentHandler(bestAttemptContent) } else { contentHandler(bestAttemptContent) return } } }
1
0
1.2k
Nov ’25
Screens added / removed continually when display turned off
I have a function in my app to detect if screens are added or removed, watching for notifications from NSApplication.didChangeScreenParametersNotification. I am seeing some strange behavior when the screen attached to a Mac mini is turned off, macOS will spit out hundreds of the didChangeScreenParametersNotification, all relating to a 'ghost' screen being added and then subsequently replaced with the original screen a second later. This cycle will go on for hours until the screen is turned back on again. I can confirm this also happens with the CoreGraphics equivalent, with flags .added and .removed being the only changes. I would imagine this creates immense churn for all apps watching for screen changes. I've tried debouncing the notifications but even with a delay of 10 seconds this is still being called hundreds of times while the computer is idle and the screen is off. One constant I can see is that the CGDisplayUnitNumber() for the 'ghost' display is always 0, while the logical unit number for the real screen is '1'. Is it safe to ignore screens with 0? I'm trying to find a reliable way to prevent heavy processing for 'false' screens. I'm afraid because this ghost screen has parameters so different to the actual screen, it's otherwise not possible to ignore it as it looks like a new screen. See example below: // Observe notification NotificationCenter.default.addObserver(self, selector: #selector(displaysDidChange), name: NSApplication.didChangeScreenParametersNotification, object: nil) // Function to update screens called from displaysDidChange func updateScreens() { let screens = NSScreen.screens for screen in screens { guard let screenDisplayID = screen.displayID() else { NSLog("Screen does not have a display ID: \(screen.localizedName)") continue } let screenIdentifier = "v\(CGDisplayVendorNumber(screenDisplayID)), m\(CGDisplayModelNumber(screenDisplayID)), sn\(CGDisplaySerialNumber(screenDisplayID)), u\(CGDisplayUnitNumber(screenDisplayID)), sz\(CGDisplayScreenSize(screenDisplayID))" } // -- Logic to determine if screen is new or already exists for window management -- NSLog("Found new screen display ID \(screenDisplayID) (\(screenIdentifier)): \(screen.localizedName)") } And the logging I'll get: Found new screen display ID 2 (v16652, m1219, sn16843009, u1, sz(1434.3529196346508, 806.823517294491)): Philips FTV Found new screen display ID 10586 (v1970170734, m1986622068, sn0, u0, sz(677.3333231608074, 380.9999942779541)):
7
0
159
Jun ’25
Smart Adaptive Volume & Brightness - Say Goodbye to Noise & Visual Pollution!
Hello everyone in the iOS Devolution community! I'd like to share a suggestion that I believe would bring an unprecedented level of intelligence and comfort to the daily iPhone experience: Smart Adaptive Volume & Brightness. The Problem We Aim to Solve How many times has your iPhone rung too loudly in a quiet environment, embarrassing you in a meeting or waking someone up? Or, the opposite, you missed an important call on a busy street because the volume was too low? And what about screen brightness? It's a constant adjustment: too bright in the dark, hard to see in the sun. Currently, we have to manually adjust volume and brightness, or rely on Auto-Brightness (which only works for the screen) and Focus modes, which can be a bit "all or nothing." This leads to interruptions, frustration, and that feeling that your phone isn't really adapting to you. The Solution: Smart Adaptive Volume & Brightness My proposal is for iOS to use the iPhone's own sensors to dynamically adapt notification and ringtone volume, and screen brightness, to the environment we're in. How it would work in practice: Environmental Scan Before Ringing/Displaying: When a notification (call, message, app alert) is about to be delivered, and even before it makes a sound, the iPhone would briefly activate its sensors. The microphone would read the ambient noise level (in decibels), but without recording audio or analyzing any content. Just the "noise" of the surroundings. The ambient light sensor would assess the light intensity around the device. Intelligent and Coordinated Adjustment: Based on these combined readings of noise and brightness, iOS would make the adjustments: In noisy and bright environments (e.g., on the street during the day): The ringtone volume would be automatically increased to ensure you hear it, and the screen brightness would also be raised to facilitate viewing in strong light. In quiet and dark environments (e.g., cinema, bedroom at night): The volume would be discreetly reduced to avoid disturbances, and the screen brightness would be dimmed for your visual comfort and to avoid bothering others. Adjustments would be gradual, adapting to any type of environment (office, cafe, etc.). User Control: Of course, we'd have the option to enable or disable "Smart Adaptive Volume & Brightness" in the settings. We could also define minimum and maximum limits for these automatic adjustments, ensuring the iPhone adapts to our personal comfort levels. This feature would complement existing Focus modes, operating within the permissions of any active Focus. The Benefits for the User Goodbye to Inconvenient Interruptions: No more startling loud rings in quiet places. Never Miss a Call Again: In noisy environments, your iPhone will adapt to be heard. Constant Visual Comfort: The screen will always be at the ideal brightness, without blinding you in the dark or disappearing in the sun. Smoother Experience: Fewer manual adjustments, more time to focus on what matters. Guaranteed Privacy: The use of microphones and sensors would be strictly for environmental measurement, without recording or analyzing personal data. I believe this feature would bring a new level of intelligence and usability to iOS, making the iPhone even more intuitive and adapted to our daily lives. What do you all think of this idea?
1
0
96
Jun ’25
Push notifications - Traffic gets "server-rst"
It seems our company server is sending to Apple push service the push notifications that are supposed to be transferred to devices our app is installed on – but you it seems you are blocking the request We can see traffic going out from our server side towards the apple gateway notification server using port 2195 and we can see that the traffic gets "server-rst" meaning that the apple gateway server kills the connection You might need to whitelist our external IP's
3
0
128
Apr ’25
Silent push throttling breaking accessibility app for neurodivergent users
Hello all 👋 We're developing an app for families with neurodivergent members (primarily autistic children) and have run into a critical reliability issue with silent push notifications that breaks core functionality. Our current implementation: When a caretaker updates the person's daily routine/schedule in our system, we send a silent push notification to the user's device. The app wakes, connects to our server, downloads the updated schedule, and creates/updates local notifications for upcoming activities. The problem: Because the app is rarely/never directly interacted with by the end user (the child doesn't open the app - caregivers configure it on their behalf), silent push notifications get progressively throttled and eventually stop being delivered entirely. This means schedule changes made by caregivers never reach the device, breaking the app's core value proposition. Uninstalling and reinstalling doesn't reset the throttling state Questions: Is there any way to reset or mitigate throttling for devices that legitimately need background updates but have low or no user interaction? This is an accessibility use case where the end user (child) doesn't interact with the app, but the app must reliably receive updates. Would switching to regular (visible) push notifications avoid this throttling even if the app is not interacted with? We already have Critical Alerts entitlement, but for regular updates we're worried that the "CRITICAL ALERT" banner will be too upsetting for the child. Is there any exception process for accessibility apps to change the way Critical Alerts are presented? For neurodivergent individuals, predictable routines are essential. When schedule updates don't reach their device, it can cause significant distress. This is a genuine accessibility need, not a "nice-to-have" feature. Any guidance from Apple engineers or developers who've solved similar challenges would be greatly appreciated. Thank you!
6
0
295
Oct ’25
The APP was not awakened after start a liveactivity
The APP was not awakened by system after start a liveactivity and the liveactivity has showed on lock screen.so the updatetoken wont send to our inner server and the liveactivity can not update,often like this,but sometimes it can work. it makes me confuse,and i don't know how should i can do,because the liveactivity like a black box,i can not analyse the data link.for example ,inner server send a start liveactivity,but it can not accept a updatetoken unless the user lanuch APP. i hope the liveactivity can start and update on background. And i have developed it as described in the document. Hope to get your help,thank you very much.
3
0
284
Feb ’26
Issue with app not waking up intermittently due to Pushkit (VOIP)
I am developing a VoIP service. Usually, when receiving a VoIP Push, Callkit is exposed immediately after receiving the message and the app is designed to be used. However, there is an extremely intermittent phenomenon (not well reproduced) where the app does not wake up even when receiving a VoIP Push. And after a long time, the app wakes up and Callkit is activated. (A long time after receiving the call…) Has anyone experienced the above phenomenon? I wonder if there are any reported parts depending on the OS version. (I have identified that it does not occur in the 17.x version, but it is difficult to guarantee because it occurs extremely intermittently) The app is not running in the background, but... Could this be happening if there are a lot of pending operations in the background? I need help urgently
5
0
626
Feb ’26
Can I listen to user choice when asked for update permissions on Live Activity?
We would like to better understand the discrepancy between a Push To Start and the subsequent Updates where I see a number of recipients drop greatly. Our assumption is that this is a result of the end user not clicking the "Allow" prompt when a push to start widget is shown on the screen for the first time, but we currently do not have a way to listen to the user's choice when prompted. Is there any way of tapping into this, to determine if this is in fact where the variance is coming from, or if there is actually just a problem with the request to retrieve the update token from our end?
1
0
86
Apr ’25
Posting a local notifications (or alert) from a launch agent
My Mac app has a launch agent (within the app bundle) that works great without the app running. There are some occasions where I need to display an alert and ask the user to launch the app to handle the issue. I thought about using UNUserNotificationCenter but I'm not able to make it work from the agent. I'm asking for authorization as follows: [center requestAuthorizationWithOptions:(UNAuthorizationOptionAlert | UNAuthorizationOptionSound | UNAuthorizationOptionBadge) completionHandler:^(BOOL granted, NSError * _Nullable error) { NSLog(@"authorization request completion. Granted: %@, error: %@ (%@)",granted?@"YES":@"NO",error, [error localizedDescription]); }]; And I'm trying to post the notification as follows: content.title = @"Your App Name"; content.body = @"Click the button to open the app"; content.sound = [UNNotificationSound defaultSound]; UNNotificationRequest *request = [UNNotificationRequest requestWithIdentifier:[[NSUUID UUID] UUIDString] content:content trigger:nil]; [center addNotificationRequest:request withCompletionHandler:^(NSError * _Nullable error) { if (error) { NSLog(@"Error showing notification: %@ %@", error, [error localizedDescription]); } }]; When running I'm getting asked to authorize, I authorize and all seems OK in system settings but I'm not able send any notifications. addNotificationRequest results in UNErrorCodeNotificationsNotAllowed error. I tried this with the authorization request inside the main app, or inside the agent, with the same results. When trying to post the notification from within the app, it does work, but that's not what I need. Is posting notifications from within the launch agent not possible at all, or is there anything here that I'm missing. TIA
2
0
185
Oct ’25
APNs Background Push Success but Wallet Pass Fails with ‘Unable to Deserialize JSON Payload’ on Device
I'm working on implementing Apple Wallet passes using background push notifications. My server successfully sends the push notification using APNs. The response from the server is HTTP/2 200, and the device receives the push — I can confirm this from device logs. However, the device logs show the following error: "Failed to parse JSON message payload for topic " "Unable to deserialize JSON message payload" My payload is below 2 payload. //string payload = "{"aps":{"content-available":1}}"; string payload = JsonConvert.SerializeObject(new { aps = new Dictionary<string, object> { { "content-available", 1 } } }); string curlArgs = $"-s -o nul -w \"%{{http_code}}\" " + $"--data-binary \"{payload}\" " + $"-H \"apns-topic: {bundleId}\" " + $"-H \"apns-push-type: background\" " + $"-H \"apns-priority: 5\" " + $"-H \"content-type: application/json\" " + $"-H \"authorization: bearer {jwt}\" " + $"--http2 https://api.push.apple.com/3/device/{token}"; I’ve confirmed that: The device has the Wallet pass installed. The apns-topic header is set to my passTypeIdentifier. The apns-push-type is background and apns-priority is 5. Steps to Reproduce: Install Wallet pass on iOS device. Send background push to device using the above payload. Observe the device logs using Console.app or log stream. See error: unable to deserialize JSON message payload. Is there a specific payload format expected for Wallet passes? Or any additional fields required in the push payload to avoid this deserialization error?
1
0
168
Jul ’25
What is the expected behavior for a notification service extension if the user has not been prompted for requestAuthorization()
If an iOS application has a notification service extension which gets sent a push, but the user has not been prompted for notification authorization via requestAuthorization() then what is the expected behavior? Will the push get delivered to the NSE but the resulting notification not displayed? Or will the push not get delivered at all to the NSE?
Replies
3
Boosts
0
Views
152
Activity
Sep ’25
APNs Feedback Service Domain Unavailable
The APNs Feedback Service domain “feedback.push.apple.com” was deprecated on March 31, 2021, and became unavailable after August 2025 due to domain name resolution failures. Will this feedback service become available again in the future? Also, is it possible to use the APNs Feedback Service with a domain different from “feedback.push.apple.com”?
Replies
1
Boosts
0
Views
76
Activity
Sep ’25
iOS doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an APNs PUSH
I am developing an application that uses NetworkExtension (Local PUSH function) And VoIP(APNs) PUSH. Nowadays, I found a problem on this app doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an APNs PUSH. My confimation result of my app and server log is below. 11:00 AM: my server(PBX) requests a VoIP(APNs) PUSH notification to the APNs. But my app does not receive the VoIP(APNs) PUSH. At this time, my app is running on LAN (Wi-Fi without internet connection), as a result, NetworkExtension was running. so I think this is normal behaviour. 14:55:11 PM: There is an incoming call from the my server(PBX) via local net, and NetworkExtension calls iOS API(API name is reportIncomingCall). However, iOS does not call the delegate didReceiveIncomingCallWithUserInfo for the reportIncomingCall. 14:55:11 PM: At almost the same time, iOS calls the delegate cdidReceiveIncomingPushWithPayload of VoIP PUSH. (instead of call the delegate didReceiveIncomingCallWithUserInfo for the reportIncomingCall?) And the content of this VoIP(APNs) PUSH was the incoming call at "11:00 AM". In other words, the VoIP(APNs) PUSH at 11:00 AM is stuck inside iOS, and at 14:55:11 PM, from NetworkExtension reports it. I feel there is a problem on iOS doesn't handle incoming call of Local PUSH when receiving a Local PUSH after receiving an VoIP(APNs) PUSH. Would you tell me Apple's opioion about this? If this is known problem, Please tell me about it.
Replies
7
Boosts
0
Views
1.2k
Activity
Feb ’26
Persistent iOS Signing & UIBackgroundModes Entitlement Issue
Problem Statement We are experiencing a critical and persistent issue preventing the successful signing and building of our iOS application. The core problem is that provisioning profiles, whether automatically generated by Xcode or manually created in the Apple Developer Portal, consistently fail to include the UIBackgroundModes entitlement, leading to a build failure. Specific Question Why are provisioning profiles generated via the Apple Developer Portal and/or Xcode's automatic signing process consistently omitting the UIBackgroundModes entitlement for our App ID, even when this capability is explicitly configured in Xcode? We seek guidance or backend intervention to ensure our provisioning profiles include the necessary entitlement. Expected Outcome We expect to be able to successfully build and sign our iOS application, with provisioning profiles that correctly include the UIBackgroundModes entitlement, allowing for proper implementation of remote notifications. Observed Symptoms Primary Build Error: Consistent build failure with the exact error message: "Automatic signing failed: Provisioning profile 'iOS Team Provisioning Profile: com.scott.ultimatefix' doesn't include the UIBackgroundModes entitlement." Missing Entitlement in Profile (Confirmed by Inspection): Direct inspection of downloaded .mobileprovision files (including those manually generated in the Developer Portal for com.scott.ultimatefix) consistently shows the absence of the UIBackgroundModes entry within the section of the Entitlements dictionary. The aps-environment key for Push Notifications is present, indicating Push Notifications are enabled, but Background Modes are not. Certificates Correctly Recognized in Xcode: Our "Apple Development: Stephen Criscell Scott" and "Apple Distribution: Stephen Criscell Scott" certificates are correctly displayed and recognized in both Keychain Access and Xcode's Preferences &gt; Accounts &gt; Manage Certificates window (without "Not in Keychain" status). Furthermore, the Signing &amp; Capabilities tab for the target in Xcode now correctly shows Signing Certificate: Apple Development: Stephen Criscell Scott. Persistent Issue Across Resets: The problem persists despite extensive local cache invalidation, Xcode reinstallation, and even testing in a fresh macOS user account (which confirmed the issue was not user-specific).
Replies
1
Boosts
0
Views
141
Activity
Jun ’25
Local-only iOS Notifications
Hello! I'm currently trying to add local push notifications to my iOS app (React Native + Expo). Most of the guides and documentation I found online revolve around remote notification capabilities and APNS - I don't need this. The app will register a background task to periodically check if it should trigger a notification, fully local. I'm running into issues when adding the push notification capabilities, saying I need a new provisioning profile and to modify the App ID, which prompts me to set up certificates to communicate with APNS - which I don't need. So I was wondering: Is it possible to build an app without the remote notification setup that can still trigger local notifications? Or is it kind of all-or-nothing, and I need to set up remote notifications as well even if I only need to trigger them locally? Couldn't really find much online about this, and before I invalidate my current certificates and go through a bunch of redundant setup, I thought I'd ask here. Help would be greatly appreciated! Thank you!
Replies
2
Boosts
0
Views
92
Activity
Jun ’25
Notification easy control
Dear Apple Team, I hope this message finds you well. I wanted to share a playful and innovative idea that could enhance the iPhone experience—particularly when viewing content in full-screen mode through apps like Apple TV or YouTube. Feature Concept: Hands-Free Dismissal of Notifications When the iPhone is in landscape mode, incoming notifications can interrupt the viewing experience. While Focus Mode and swipe gestures help, I thought of a more intuitive and hands-free interaction: using a light puff of air directed toward the screen to dismiss a notification. This interaction could use the microphone or other onboard sensors to detect a brief burst of air, providing a fun and natural way to maintain immersion without touching the device. If this isn’t feasible with current hardware, here are a few alternative concepts that align with the same goal: Blink to Dismiss: Using Face ID sensors to detect a quick blink as a hands-free gesture. Shake to Dismiss: A gentle shake gesture when holding the iPhone in one hand. Gaze-Based Dismissal: Notifications automatically disappear after a brief moment of eye contact. These ideas could offer both accessibility benefits and a touch of delight—making the iPhone feel even more magical and responsive. Thank you for your time and for considering this suggestion! Warm regards, Badhan Baidya
Replies
1
Boosts
0
Views
174
Activity
Sep ’25
APNS notifications of apns-push-type pushtotalk sometimes stop arriving after switching networks
PLATFORM AND VERSION: iOS Development environment: Other: .net MAUI with vscode Run-time configuration: iOS 18.1.1 DESCRIPTION OF PROBLEM APNS notifications of apns-push-type pushtotalk sometimes stop arriving after switching networks. STEPS TO REPRODUCE We have created a simple app which can be used to deminstrate this issue. When you launch the app it displays the APNS token which you can then use fromn the Apple Push Console to manually send it PTT push notifications. https://github.com/trampster/PttPushNotificationIssue On an iPhone SE (we havn't been able to reproduce on our iPhone 11) Start the APP to register for the APNS push notifications Turn off the WiFi wait for 5 seconds Attempt a push to the app manually using the Push Notifications Console (this should fail, which is fine) Turn on Cellular and wait for it to connect Attempt to push to the app manually using the Push Notifications Console -> This fails, and all attempts to send an pushtotalk push notifications fail until the we switch network again. Send a push while offline before connecting to the new network seems to make it happen more often but hard to tell for sure. The results of the failed push in the console look like this: Delivery LogLast updated: 30/01/25, 16:45:06 GMT+13 Refresh 30 Jan 2025, 16:45:03.661 GMT+13 received by APNS Server 30 Jan 2025, 16:45:03.662 GMT+13 discarded as device was offline The device is actually very much online. Switching networks again oftern makes things come right. But it doesn't seem to come right by itself. We can't respond to network changes and do anything as the whole point of using push-to-talk push notifications is to wake up the app when in the background to answer a call, this means we are not running and therefore cannot respond to network changes to try to work arround this issue.
Replies
6
Boosts
0
Views
682
Activity
Apr ’25
Why are non-critical notifications quieter than critical alerts at max volume?
When I turn the Ringtone and Alerts volume all the way up, I expect standard notifications to play at the loudest level the device allows. In theory, this should match the volume of a critical alert with its sound.volume set to 1.0 in payload. However, I’ve noticed that non-critical notifications still play quieter than critical alerts under these conditions. Critical alerts with volume: 1.0 sound noticeably louder than standard notifications, even though the Ringtone and Alerts slider is already set to maximum. And I couldn't find a documentation for this behavior anywhere. Is this expected behavior on iOS? And is there any way to make non-critical notifications play at the same maximum loudness as critical alerts? Thanks in advance for any clarification.
Replies
3
Boosts
0
Views
245
Activity
Sep ’25
UNNotificationServiceExtension Not Displaying Sender Image
I created a Notification Service Extension to display profile images in place for the app image (i.e. iMessage). I send a remote push notification via Firebase Functions, and in the payload, the relevant profile image url string. The profile image url string in the payload is successfully delivered as it appears in my console log and AppDelegate didReceiveRemoteNotification function. My problem is the profile image does not replace the default app icon image in the remote push notification. Below is my configuration. Any guidance would be appreciated! Main target app: the info plist contains NSUSerActivityTypes = [INSendMessageIntent]. The Communications Notifications capability is enabled and "Copy only when installing" in Build Phases Embed Foundation Extensions Notification Service Extension plist: contains NSExtension > NSExtensionAttributes > IntentsSupported > INSendMessageIntent. Notification Service Extension class code: var contentHandler: ((UNNotificationContent) -> Void)? var bestAttemptContent: UNMutableNotificationContent? override func didReceive(_ request: UNNotificationRequest, withContentHandler contentHandler: @escaping (UNNotificationContent) -> Void) { self.contentHandler = contentHandler bestAttemptContent = (request.content.mutableCopy() as? UNMutableNotificationContent) guard var bestAttemptContent = bestAttemptContent else { return } guard let fcmOptions = bestAttemptContent.userInfo["fcm_options"] as? [String: Any], let attachmentUrlAsString = fcmOptions["imageURL"] as? String else { contentHandler(bestAttemptContent) return } if let attachmentUrl = URL(string: attachmentUrlAsString) { var senderNameComponents = PersonNameComponents() senderNameComponents.nickname = bestAttemptContent.title let profileImage = INImage(url: attachmentUrl) let sender = INPerson(personHandle: INPersonHandle(value: "1233211234", type: .unknown), nameComponents: senderNameComponents, displayName: bestAttemptContent.title, image: profileImage, contactIdentifier: nil, customIdentifier: nil, isMe: false) let receiver = INPerson(personHandle: INPersonHandle(value: "1233211234", type: .unknown), nameComponents: nil, displayName: nil, image: nil, contactIdentifier: nil, customIdentifier: nil, isMe: true) let intent = INSendMessageIntent( recipients: [receiver], outgoingMessageType: .outgoingMessageText, content: "Test", speakableGroupName: INSpeakableString(spokenPhrase: "Sender Name"), conversationIdentifier: "sampleConversationIdentifier", serviceName: nil, sender: sender, attachments: nil ) intent.setImage(profileImage, forParameterNamed: \.sender) let interaction = INInteraction(intent: intent, response: nil) interaction.direction = .incoming interaction.donate(completion: nil) if #available(iOSApplicationExtension 15.0, *) { do { bestAttemptContent = try bestAttemptContent.updating(from: intent) as! UNMutableNotificationContent } catch { contentHandler(bestAttemptContent) return } } contentHandler(bestAttemptContent) } else { contentHandler(bestAttemptContent) return } } }
Replies
1
Boosts
0
Views
1.2k
Activity
Nov ’25
Will Push Notifications Be Delivered to Mobile Devices After the TestFlight App Expires?
Apps distributed via TestFlight have a 90-day expiration period, and we have been sending push notifications to mobile devices daily. Will push notifications still be delivered to mobile devices after the app has expired?
Replies
3
Boosts
0
Views
83
Activity
Jun ’25
Screens added / removed continually when display turned off
I have a function in my app to detect if screens are added or removed, watching for notifications from NSApplication.didChangeScreenParametersNotification. I am seeing some strange behavior when the screen attached to a Mac mini is turned off, macOS will spit out hundreds of the didChangeScreenParametersNotification, all relating to a 'ghost' screen being added and then subsequently replaced with the original screen a second later. This cycle will go on for hours until the screen is turned back on again. I can confirm this also happens with the CoreGraphics equivalent, with flags .added and .removed being the only changes. I would imagine this creates immense churn for all apps watching for screen changes. I've tried debouncing the notifications but even with a delay of 10 seconds this is still being called hundreds of times while the computer is idle and the screen is off. One constant I can see is that the CGDisplayUnitNumber() for the 'ghost' display is always 0, while the logical unit number for the real screen is '1'. Is it safe to ignore screens with 0? I'm trying to find a reliable way to prevent heavy processing for 'false' screens. I'm afraid because this ghost screen has parameters so different to the actual screen, it's otherwise not possible to ignore it as it looks like a new screen. See example below: // Observe notification NotificationCenter.default.addObserver(self, selector: #selector(displaysDidChange), name: NSApplication.didChangeScreenParametersNotification, object: nil) // Function to update screens called from displaysDidChange func updateScreens() { let screens = NSScreen.screens for screen in screens { guard let screenDisplayID = screen.displayID() else { NSLog("Screen does not have a display ID: \(screen.localizedName)") continue } let screenIdentifier = "v\(CGDisplayVendorNumber(screenDisplayID)), m\(CGDisplayModelNumber(screenDisplayID)), sn\(CGDisplaySerialNumber(screenDisplayID)), u\(CGDisplayUnitNumber(screenDisplayID)), sz\(CGDisplayScreenSize(screenDisplayID))" } // -- Logic to determine if screen is new or already exists for window management -- NSLog("Found new screen display ID \(screenDisplayID) (\(screenIdentifier)): \(screen.localizedName)") } And the logging I'll get: Found new screen display ID 2 (v16652, m1219, sn16843009, u1, sz(1434.3529196346508, 806.823517294491)): Philips FTV Found new screen display ID 10586 (v1970170734, m1986622068, sn0, u0, sz(677.3333231608074, 380.9999942779541)):
Replies
7
Boosts
0
Views
159
Activity
Jun ’25
Smart Adaptive Volume & Brightness - Say Goodbye to Noise & Visual Pollution!
Hello everyone in the iOS Devolution community! I'd like to share a suggestion that I believe would bring an unprecedented level of intelligence and comfort to the daily iPhone experience: Smart Adaptive Volume & Brightness. The Problem We Aim to Solve How many times has your iPhone rung too loudly in a quiet environment, embarrassing you in a meeting or waking someone up? Or, the opposite, you missed an important call on a busy street because the volume was too low? And what about screen brightness? It's a constant adjustment: too bright in the dark, hard to see in the sun. Currently, we have to manually adjust volume and brightness, or rely on Auto-Brightness (which only works for the screen) and Focus modes, which can be a bit "all or nothing." This leads to interruptions, frustration, and that feeling that your phone isn't really adapting to you. The Solution: Smart Adaptive Volume & Brightness My proposal is for iOS to use the iPhone's own sensors to dynamically adapt notification and ringtone volume, and screen brightness, to the environment we're in. How it would work in practice: Environmental Scan Before Ringing/Displaying: When a notification (call, message, app alert) is about to be delivered, and even before it makes a sound, the iPhone would briefly activate its sensors. The microphone would read the ambient noise level (in decibels), but without recording audio or analyzing any content. Just the "noise" of the surroundings. The ambient light sensor would assess the light intensity around the device. Intelligent and Coordinated Adjustment: Based on these combined readings of noise and brightness, iOS would make the adjustments: In noisy and bright environments (e.g., on the street during the day): The ringtone volume would be automatically increased to ensure you hear it, and the screen brightness would also be raised to facilitate viewing in strong light. In quiet and dark environments (e.g., cinema, bedroom at night): The volume would be discreetly reduced to avoid disturbances, and the screen brightness would be dimmed for your visual comfort and to avoid bothering others. Adjustments would be gradual, adapting to any type of environment (office, cafe, etc.). User Control: Of course, we'd have the option to enable or disable "Smart Adaptive Volume & Brightness" in the settings. We could also define minimum and maximum limits for these automatic adjustments, ensuring the iPhone adapts to our personal comfort levels. This feature would complement existing Focus modes, operating within the permissions of any active Focus. The Benefits for the User Goodbye to Inconvenient Interruptions: No more startling loud rings in quiet places. Never Miss a Call Again: In noisy environments, your iPhone will adapt to be heard. Constant Visual Comfort: The screen will always be at the ideal brightness, without blinding you in the dark or disappearing in the sun. Smoother Experience: Fewer manual adjustments, more time to focus on what matters. Guaranteed Privacy: The use of microphones and sensors would be strictly for environmental measurement, without recording or analyzing personal data. I believe this feature would bring a new level of intelligence and usability to iOS, making the iPhone even more intuitive and adapted to our daily lives. What do you all think of this idea?
Replies
1
Boosts
0
Views
96
Activity
Jun ’25
Push notifications - Traffic gets "server-rst"
It seems our company server is sending to Apple push service the push notifications that are supposed to be transferred to devices our app is installed on – but you it seems you are blocking the request We can see traffic going out from our server side towards the apple gateway notification server using port 2195 and we can see that the traffic gets "server-rst" meaning that the apple gateway server kills the connection You might need to whitelist our external IP's
Replies
3
Boosts
0
Views
128
Activity
Apr ’25
Silent push throttling breaking accessibility app for neurodivergent users
Hello all 👋 We're developing an app for families with neurodivergent members (primarily autistic children) and have run into a critical reliability issue with silent push notifications that breaks core functionality. Our current implementation: When a caretaker updates the person's daily routine/schedule in our system, we send a silent push notification to the user's device. The app wakes, connects to our server, downloads the updated schedule, and creates/updates local notifications for upcoming activities. The problem: Because the app is rarely/never directly interacted with by the end user (the child doesn't open the app - caregivers configure it on their behalf), silent push notifications get progressively throttled and eventually stop being delivered entirely. This means schedule changes made by caregivers never reach the device, breaking the app's core value proposition. Uninstalling and reinstalling doesn't reset the throttling state Questions: Is there any way to reset or mitigate throttling for devices that legitimately need background updates but have low or no user interaction? This is an accessibility use case where the end user (child) doesn't interact with the app, but the app must reliably receive updates. Would switching to regular (visible) push notifications avoid this throttling even if the app is not interacted with? We already have Critical Alerts entitlement, but for regular updates we're worried that the "CRITICAL ALERT" banner will be too upsetting for the child. Is there any exception process for accessibility apps to change the way Critical Alerts are presented? For neurodivergent individuals, predictable routines are essential. When schedule updates don't reach their device, it can cause significant distress. This is a genuine accessibility need, not a "nice-to-have" feature. Any guidance from Apple engineers or developers who've solved similar challenges would be greatly appreciated. Thank you!
Replies
6
Boosts
0
Views
295
Activity
Oct ’25
The APP was not awakened after start a liveactivity
The APP was not awakened by system after start a liveactivity and the liveactivity has showed on lock screen.so the updatetoken wont send to our inner server and the liveactivity can not update,often like this,but sometimes it can work. it makes me confuse,and i don't know how should i can do,because the liveactivity like a black box,i can not analyse the data link.for example ,inner server send a start liveactivity,but it can not accept a updatetoken unless the user lanuch APP. i hope the liveactivity can start and update on background. And i have developed it as described in the document. Hope to get your help,thank you very much.
Replies
3
Boosts
0
Views
284
Activity
Feb ’26
Issue with app not waking up intermittently due to Pushkit (VOIP)
I am developing a VoIP service. Usually, when receiving a VoIP Push, Callkit is exposed immediately after receiving the message and the app is designed to be used. However, there is an extremely intermittent phenomenon (not well reproduced) where the app does not wake up even when receiving a VoIP Push. And after a long time, the app wakes up and Callkit is activated. (A long time after receiving the call…) Has anyone experienced the above phenomenon? I wonder if there are any reported parts depending on the OS version. (I have identified that it does not occur in the 17.x version, but it is difficult to guarantee because it occurs extremely intermittently) The app is not running in the background, but... Could this be happening if there are a lot of pending operations in the background? I need help urgently
Replies
5
Boosts
0
Views
626
Activity
Feb ’26
Can I listen to user choice when asked for update permissions on Live Activity?
We would like to better understand the discrepancy between a Push To Start and the subsequent Updates where I see a number of recipients drop greatly. Our assumption is that this is a result of the end user not clicking the "Allow" prompt when a push to start widget is shown on the screen for the first time, but we currently do not have a way to listen to the user's choice when prompted. Is there any way of tapping into this, to determine if this is in fact where the variance is coming from, or if there is actually just a problem with the request to retrieve the update token from our end?
Replies
1
Boosts
0
Views
86
Activity
Apr ’25
Posting a local notifications (or alert) from a launch agent
My Mac app has a launch agent (within the app bundle) that works great without the app running. There are some occasions where I need to display an alert and ask the user to launch the app to handle the issue. I thought about using UNUserNotificationCenter but I'm not able to make it work from the agent. I'm asking for authorization as follows: [center requestAuthorizationWithOptions:(UNAuthorizationOptionAlert | UNAuthorizationOptionSound | UNAuthorizationOptionBadge) completionHandler:^(BOOL granted, NSError * _Nullable error) { NSLog(@"authorization request completion. Granted: %@, error: %@ (%@)",granted?@"YES":@"NO",error, [error localizedDescription]); }]; And I'm trying to post the notification as follows: content.title = @"Your App Name"; content.body = @"Click the button to open the app"; content.sound = [UNNotificationSound defaultSound]; UNNotificationRequest *request = [UNNotificationRequest requestWithIdentifier:[[NSUUID UUID] UUIDString] content:content trigger:nil]; [center addNotificationRequest:request withCompletionHandler:^(NSError * _Nullable error) { if (error) { NSLog(@"Error showing notification: %@ %@", error, [error localizedDescription]); } }]; When running I'm getting asked to authorize, I authorize and all seems OK in system settings but I'm not able send any notifications. addNotificationRequest results in UNErrorCodeNotificationsNotAllowed error. I tried this with the authorization request inside the main app, or inside the agent, with the same results. When trying to post the notification from within the app, it does work, but that's not what I need. Is posting notifications from within the launch agent not possible at all, or is there anything here that I'm missing. TIA
Replies
2
Boosts
0
Views
185
Activity
Oct ’25
APNs Background Push Success but Wallet Pass Fails with ‘Unable to Deserialize JSON Payload’ on Device
I'm working on implementing Apple Wallet passes using background push notifications. My server successfully sends the push notification using APNs. The response from the server is HTTP/2 200, and the device receives the push — I can confirm this from device logs. However, the device logs show the following error: "Failed to parse JSON message payload for topic " "Unable to deserialize JSON message payload" My payload is below 2 payload. //string payload = "{"aps":{"content-available":1}}"; string payload = JsonConvert.SerializeObject(new { aps = new Dictionary<string, object> { { "content-available", 1 } } }); string curlArgs = $"-s -o nul -w \"%{{http_code}}\" " + $"--data-binary \"{payload}\" " + $"-H \"apns-topic: {bundleId}\" " + $"-H \"apns-push-type: background\" " + $"-H \"apns-priority: 5\" " + $"-H \"content-type: application/json\" " + $"-H \"authorization: bearer {jwt}\" " + $"--http2 https://api.push.apple.com/3/device/{token}"; I’ve confirmed that: The device has the Wallet pass installed. The apns-topic header is set to my passTypeIdentifier. The apns-push-type is background and apns-priority is 5. Steps to Reproduce: Install Wallet pass on iOS device. Send background push to device using the above payload. Observe the device logs using Console.app or log stream. See error: unable to deserialize JSON message payload. Is there a specific payload format expected for Wallet passes? Or any additional fields required in the push payload to avoid this deserialization error?
Replies
1
Boosts
0
Views
168
Activity
Jul ’25
AudioServicesPlaySystemSound on NotificationService
Can I using AudioServicesPlaySystemSound for play sound os system on NotificationService?
Replies
2
Boosts
0
Views
103
Activity
May ’25