When User restarted iOS device, after powering on iOS App is not able to get VoIP push notification. If user opens App, immediate VoIP push receiving. In Normal (App Kill or Background state) everything works as expected. Issue is when device is powered on and immediately( In 1-2 mins) try to call on device. We are using delegate to show Call to User public func pushRegistry(_ registry: PKPushRegistry, didReceiveIncomingPushWith payload: PKPushPayload, for type: PKPushType, completion: @escaping () -> Void)

I submitted the form for the critical alert entitlement but have not received any response for already 2 weeks. How long does it normally take to review such requests? Is there any way I can contact a certain department directly?

I created an app. One if its functionalities is receive Remote Notification in the background, while app is monitoring Significant Location Changes (SLC). This functionality worked fine. I was receiving these notifications correctly. Sometimes instantly, sometime with small or large delay. And then I send the app for review. It was rejected with 3 remarks: The app or metadata includes information about third-party platforms that may not be relevant for App Store users, who are focused on experiences offered by the app itself (I wrote that app communication works both for iOS and Android.) The app declares support for audio in the UIBackgroundModes key in your Info.plist but we are unable to locate any features that require persistent audio. EULA (End User License Agreement) is missing for in-app purchases. After the rejection the app is no longer receiving these notifications. They are there, since the app receives them, when I open app, or significant location change is detected. It also works, when I run the app directly from Xcode (in debug mode), not from TestFlight nor in Sandbox. It seem to me like Apple somehow spoiled my background capabilities on purpose or accidentally. Is it possible? What can I do with it? Is it the case that I should just fix the review remarks and send the app back to review, and once the app passes it, it will work again? Or should I not count on it? Any suggestions? I asked Apple using: https://aninterestingwebsite.com/contact/topic/#!/topic/select but so far no response.

Our application is designated to be used in a quite noisy environment (childcare facility) so we have implemented really annoying custom sounds. Unfortunately the system audio session playing custom sounds is apparently limited to half of the device volume possibility, even though the user sets full volume in the settings. How to change this behaviour to get louder notification sounds? To be clear, I don't want to overcome user settings. If the user sets quieter volume or he sets the silent mode, the application should be silent too. I just need that 100% volume settings is actually 100% device volume. This is a really critical feature for us and for our customers. We have already tried to ask for the critical alerts and we have been rejected.

We are developing a walkie-talkie style iOS app using CallKit and PushKit for real-time voice communication. The app is intended for internal company use and requires unrestricted VoIP push capabilities to reliably deliver incoming call alerts, even in background or locked states. Our app's use case follows Apple’s guidelines, and we are not using PushKit for messaging or background data. We have already enabled "Push Notifications" in Capabilities and confirmed the provisioning profile, but are unable to enable com.apple.developer.pushkit.unrestricted-voip. Could someone from Apple or the community advise on the current process to request this entitlement for a production app? Developer Team ID: 3KX7Q4LX88 App Bundle ID: com.ksc-sys.rcc.TakumiTalk Developer Name: KOHEI TAKAOKA Company: R C C, Y.K

I am checking if the user taps on the firebase push notification and get the payload. override func userNotificationCenter(_ center: UNUserNotificationCenter, didReceive response: UNNotificationResponse, withCompletionHandler completionHandler: @escaping () -> Void) { let userInfo = response.notification.request.content.userInfo os_log("notification tapped %{public}@", log: OSLog.push, type: .info, userInfo) handleNotificationPayload(userInfo as! [String: AnyObject]) setFlutterLinkClickedVariable() } My use case is in app terminated state when push notification is tapped, get the link from payload and navigate to corresponding screen based on the link. This is working when there is only one push notification. When there are multiple push notifications with different links in the payload, only the first notification I tap works. Rest of the notifications just launches the app and does not navigate because the link is not set. I am getting the link from the payload and invoking flutter code which sets the link in the user defaults (shared preferences) and when the app launches in the home screen it checks for this variable and navigates accordingly. func handleNotificationPayload(_ payload: [String: AnyObject]) { if let link = payload["link"] as? String { setFlutterLinkVariable(link) } } override func application(_ application: UIApplication, didReceiveRemoteNotification userInfo: [AnyHashable : Any], fetchCompletionHandler completionHandler: @escaping (UIBackgroundFetchResult) -> Void) { os_log("app did receive remote notification %{public}@", log: OSLog.push, type: .info, userInfo) handleNotificationPayload(userInfo as! [String : AnyObject]) completionHandler(.newData) } Currently when there is only one push notification it works because the link is set from the above method. The click delegate is not calling. I did set the delegate in application(:didFinishLaunchingWithOptions). UNUserNotificationCenter.current().delegate = self application.registerForRemoteNotifications() How to solve this issue? Thanks.

iOS push notification is not working for in App since 03-Apr-2025. We are pushing the message to APNS from our application, but message is not delivered to iOS device. We have performed tests on both PROD and QA environment and following are the observations: PROD successfully pushing the notification to APNS but not receiving the notification on iOS device (100% failure). QA received notification on iOS device always (100% success). Analyzed PROD notification server log at our end and we do not observe any error and it is showing successful also when message is pushed to APNS all the time. Need to check from APNS why push messages are not delivered to iOS devices. Validated the PROD APNS certificate at our end which we are using during call to APNS - it is valid till Oct 2025. Please suggest me any possible solution because I don't have any clue where it is failing and what to do

Hello, I am working on a project that involves using external device to connect over BLE with users iPhone. I would like to be able to notify users on our device about eg. incoming calls, messages etc. I have been succesfull in using ANCS to achieve that but I am a little worried around consistency of this solution, especially taking into account following line from documentation: Due to the nature of iOS, the ANCS is not guaranteed to always be present. As a result, the NC should look for and subscribe to the Service Changed characteristic of the GATT service in order to monitor for the potential publishing and unpublishing of the ANCS at any time. I have not been able (yet?) to find or identify circumstances when ANCS would not be avilable or would be "removed in runtime", hence would it be possible to request some guidance and clarification on the conditions when ANCS can be unavailable or removed? Thank you!

Hello! I'm currently trying to add local push notifications to my iOS app (React Native + Expo). Most of the guides and documentation I found online revolve around remote notification capabilities and APNS - I don't need this. The app will register a background task to periodically check if it should trigger a notification, fully local. I'm running into issues when adding the push notification capabilities, saying I need a new provisioning profile and to modify the App ID, which prompts me to set up certificates to communicate with APNS - which I don't need. So I was wondering: Is it possible to build an app without the remote notification setup that can still trigger local notifications? Or is it kind of all-or-nothing, and I need to set up remote notifications as well even if I only need to trigger them locally? Couldn't really find much online about this, and before I invalidate my current certificates and go through a bunch of redundant setup, I thought I'd ask here. Help would be greatly appreciated! Thank you!

I am experiencing an issue with push notifications on my iOS application. The issue is as follows: On Android devices, push notifications are received immediately without any problems. On iOS devices, the behavior is inconsistent: When the app is in the foreground, notifications are received immediately. When the app is in the background or in recent apps with a significant delay of 5–10 hours, push notifications are not received at all. This behavior creates a major challenge for us, as timely notifications are critical for our app’s functionality. We have already verified the following points on our side: Push notification certificates and APNs setup are correct. Payload and server configurations are valid, as notifications are working fine on Android. No restrictions from the server-side, since Android users receive notifications instantly. It seems the issue is specifically related to iOS devices or APNs delivery. Could you please help us identify the cause and provide guidance on how to resolve this?

I am sending push notification using HTTP/2 to https://api.push.apple.com:443 api but I am getting Operation TimeOut error in response . Can someone help

After updating to iOS 26 beta 1, I can't receive any push notifications from most applications. I can receive notifications from like Calendar, which uses local & reserved notifications, but I can't receive any remote-based notifications.

Hello, I am trying to utilize the Critical Messaging API to allow my user to message 1 or multiple pre registered contacts automatically. An issue I am having with this in testing is that when the application attempts to fire off texts to the phone numbers the success rate changes from trial to trial, with no variable changing. Sometimes I can send a Critical Message to multiple phone numbers in rapid succession, sometimes the message is only sent to 1 contact, and sometimes I get no successes. Each failure always returns the MSCriticalMessaging.notSupported error. The API documentation states, "The send(_:to:) method only works if the app is backgrounded, if it’s called from foreground the framework returns a MSCriticalMessagingError.notSupported error." If my app is always backgrounded in these tests, what other issues may cause this notSupported error return, and why does the outcomes success rate vary?

Hi everyone! I’m integrating push notifications for a taxi-driver app and ran into a blocking CarPlay issue. When the iPhone is connected to CarPlay (wired or wireless), the push arrives on the phone without any sound and nothing is shown or announced on the CarPlay screen. If I unplug CarPlay, the same push plays the default sound and shows a normal banner on the lock screen, so the payload itself looks valid. Environment iPhone 13 Pro, iOS 18.0 CarPlay head-unit: Xcode 16.2 CarPlay Simulator App built with Flutter 3.22 + firebase_messaging: ^15.2.5 Deployment target: iOS 14.0 Xcode capabilities enabled: Push Notifications, Time-Sensitive Notifications App settings on the device: Allow Notifications -› Sounds ON, Show in CarPlay ON Siri › Announce Notifications › CarPlay: master toggle ON + my app added to the allowed list Driving Focus = Off (same result if it’s On) Native setup in AppDelegate.swift UNUserNotificationCenter.current().requestAuthorization( options: [.alert, .sound, .badge, .carPlay] ) { _,_ in } let carPlayCategory = UNNotificationCategory( identifier: "CARPLAY_ORDER", actions: [], intentIdentifiers: [], options: [.allowInCarPlay] ) UNUserNotificationCenter.current().setNotificationCategories([carPlayCategory]) UNUserNotificationCenter.current().delegate = self application.registerForRemoteNotifications() APNs payload that I send via FCM { "aps": { "alert": { "title": "New test order", "body": "Location info test" }, "sound": "default", "category": "CARPLAY_ORDER", "interruption-level": "time-sensitive", "relevance-score": 1 } } What could be the problem? Please help me solve the error

AlarmKit custom sounds are universally broken in iOS 26.0 stable - instead of playing your custom sound, it plays a system error/timeout beep. I've spent days investigating why custom sounds result in what sounds like an error beep (like when you cancel an operation or hit a timeout) instead of the actual audio file. I can now prove this is an Apple bug, not implementation error. Evidence: Test 1: My Implementation Followed Apple's documentation exactly Tried both bundle and Library/Sounds (as documented) Result: System error beep (not my audio) Test 2: Professional Apps Tested ADHDAlarms (popular AlarmKit example by jacobsapps) https://github.com/jacobsapps/ADHDAlarms Their airhorn.mp3 custom sound: same error beep (not an airhorn) Their default sound: works perfectly Test 3: Device Testing Physical iPhone (iOS 26.0 - 23A341): broken iOS Simulator: broken Not device-specific Files are found correctly, but the actual audio file is never played. Instead, you hear what sounds like a system error/cancellation tone. What I've Eliminated Not a Library/Sounds vs Bundle issue (both broken) Not a file format issue (.mp3, .caf, .m4a all broken) Not an implementation issue (professional apps broken too) Not a device issue (simulator and device both broken) Not a file size issue (5KB to 2MB all broken) The Documentation Lie: Apple's docs for AlertConfiguration.AlertSound.named(_:) state: "Choose a file that's in your app's main bundle or the Library/Sounds folder" https://aninterestingwebsite.com/documentation/activitykit/alertconfiguration/alertsound/named(_:) Both locations are broken. Tested on: iOS 26.0 (23A341), Xcode 26.0.1, Swift 6.2 Impact: This affects any app trying to: Provide personalized wake-up sounds Use custom alarm tones Create meditation/sleep apps Differentiate from default iOS alarms Current Status: Multiple bug reports filed: FB19900024, FB18237648, FB19779004 Apple engineer claimed "fixed in latest beta" in August Still broken in iOS 26.0 stable (September) Workaround: None that I know of. You must use .default sound. For apps needing custom audio, play it with AVAudioPlayer after the alarm fires and user opens the app. Question: Has ANYONE gotten custom AlarmKit sounds working in iOS 26.0 stable? If so, plzzz help I'd be so grateful.

In the app we are developing, we update the device token upon app launch using didRegisterForRemoteNotificationsWithDeviceToken. Previously, after an iOS major update, if the app was left without being launched, users experienced an issue where notifications would not be received. Later, we confirmed that running didRegisterForRemoteNotificationsWithDeviceToken during app launch updates the device token and restores the ability to receive notifications. Therefore, we believe that the device token may change due to an iOS major update. We want to understand the detailed conditions under which the device token is updated due to an iOS update: Does the same issue occur after iOS minor updates as well? Does it always happen during iOS major updates? We reviewed the official documentation, but there was no detailed description of the device token update conditions. Additionally, we contacted Apple, but received no clear answers. If anyone has experienced the same situation, we would appreciate any information you can share.

We operate a social network application, SportsYou with over 3 million monthly active users and are experiencing significant issues with push notification delivery through APNs. We have a large number of users reporting they are not receiving push notifications. Our infrastructure uses AWS SNS integrated with APNs to deliver notifications. However, AWS CloudWatch consistently reports successful delivery (Success response), even though users confirm they never received the notifications. Because we receive success responses from AWS SNS, our system does not attempt to recreate or refresh the device endpoints. This leaves us unable to detect or recover from these delivery failures automatically. This issue is widespread and inconsistent. It affects users across multiple variables including different iOS versions, different device models, and different versions of our application. We cannot identify a clear pattern that would help us isolate the root cause. With millions of active users, even a small percentage of delivery failures represents thousands of users experiencing a degraded service. This is significantly impacting user engagement and satisfaction. We need guidance on how to properly diagnose this issue and ensure reliable notification delivery to our users. Specifically, we'd like to understand why we're receiving success responses when notifications aren't being delivered, and what steps we can take to detect and prevent these failures.

I am using UNCalendarNotificationTrigger and from my initial tests with simulator and timezone changes in my mac i see that notification donot get triggered at specific times if timezone changes, is this expected behaviour ?

I am unable to connect to APNs sandbox push endpoint from our backend servers. It works fine when hitting the request from my local machine but it fails from the infra servers. Here are the complete curl details. Endpoint: https://api.sandbox.push.apple.com:443 CURL request and response: curl -v https://api.sandbox.push.apple.com:443 Trying 17.188.168.149:443... Connected to api.sandbox.push.apple.com (17.188.168.149) port 443 ALPN: curl offers h2,http/1.1 Cipher selection: ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH TLSv1.2 (OUT), TLS handshake, Client hello (1): CAfile: /etc/pki/tls/certs/ca-bundle.crt CApath: none OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to api.sandbox.push.apple.com:443 Closing connection curl: (35) OpenSSL SSL_connect: SSL_ERROR_SYSCALL in connection to api.sandbox.push.apple.com:443 There are no issues with Production endpoint. Can someone help? Verified all certificates. Everything worked fine until 29th July but started failing since 30th July Here is the PCAP file. Additionally, Here is the outbound public IP : 3.251.214.255 apple_push_sandbox_pcap.txt

In iOS 26, I can check the notification that arrives to the user when the AirPods or Apple Watch is fully charged. When tap the notification, notification only expands and does not include actions such as moving to an app. I checked the documents of UserNotification and UNNotificationServiceExtension, but I couldn't find what I wanted. I can expand by long-tapping as default, but I'm looking for a way to expand it without entering the app when I tap the notification. I wonder if there is an API that I missed or if it's not publicly supported. thank you for your support.