An issue with the CallKit UI, specifically regarding the functionality of the speaker button. When a user initiates a video call with CallKit and then, using the existing CallKit session, initiates an audio call, there are no issues with CallKit or the audio. However, if the user terminates the video call from the CallKit UI, the active CallKit session ends. To resume the ongoing audio call, we report a new CallKit call upon the end call trigger. While there are no issues with this reporting, the CallKit UI does not provide an audio route for the built-in receiver, and the speaker button remains unresponsive. IPA was build on SDK 18 and running on iOS beta 26. Issue is NOT seen with SDK18 and running iOS 18.x or lower devices. Feedback - FB18855566

Hi, I'm using ScreenCaptureKit on macOS 14+ to record a single window. I've noticed that the Presenter Overlay only appears when capturing the entire screen, but it does not appear when recording a specific window or a region. Is there a way to enable the Presenter Overlay while recording a single window or a defined region, similar to how it works with full-screen capture? Any guidance or clarification would be greatly appreciated. Thanks in advance!

Hi everyone, I’m building a sports performance app for Apple Watch that uses the onboard IMU to analyze swings and impacts in sports like tennis and golf. The goal is to estimate club/racket head speed, ball speed, and shot quality in real time from wrist motion data. With Core Motion, I can currently get deviceMotion updates at ~100 Hz. While this is fine for general movement tracking, the actual ball impact happens much faster — 5–10 ms in tennis and ~0.5 ms in golf. Many of the high-frequency vibration/impact components are missed at 100 Hz, making it hard to directly measure or more accurately estimate certain performance metrics. Questions for Apple / community: 1. Is there a way to access raw accelerometer and gyroscope data at higher sampling rates (e.g., 500–1000 Hz) on Apple Watch? 2. If not, is this due to hardware limitations or an API/software constraint? 3. Are there any research, partner, or beta programs that allow deeper sensor access for sports-science use cases? Even modest increases in IMU sampling could unlock more accurate ball-speed estimates, impact force analysis, and strike-quality detection without needing external sensors — making Apple Watch a best-in-class wearable for precision sports analytics. Happy to share more about the current approach, sample data, and potential use cases if helpful. Thanks, Max

Hi, My app is going to consist of 2-3 pages of weather data. Do I have to add the Apple Weather logo to each page, or just the main one? Thanks, Dan Uff

After a user has launched an App Clip Experience from Safari and is done with the activity that the App Clip provides – is there a way for the App Clip to programatically close itself so the user returns to Safari?

I’m testing FinanceKit with Apple Cash and noticed that transfers don’t include any counterparty information. Here’s an example transaction I fetched: Transaction( id: 5A96EA49-B7C9-4481-949D-88247210C1D7, accountID: 28D7C0E2-DC2A-4138-B105-BCE5EE00B705, transactionAmount: 30 USD, creditDebitIndicator: .credit, transactionDescription: "Transfer", originalTransactionDescription: "", merchantCategoryCode: nil, merchantName: nil, transactionType: .transfer, status: .booked, transactionDate: 2025-08-19 21:57:54 +0000, postedDate: 2025-08-19 21:57:55 +0000 ) As you can see: transactionDescription is just "Transfer" originalTransactionDescription is empty merchantName is nil No counterparty details are exposed In contrast, the Wallet app clearly shows the other person’s name and avatar for Apple Cash transfers, making it easy to understand who the payment was with. In FinanceKit, there’s no way to distinguish between transfers with different people — every transfer looks identical. Questions Is there a hidden or planned field for Apple Cash counterparty information? Can FinanceKit provide at least minimal metadata (e.g., contact name, initials, or a privacy-preserving identifier)? Is there any workaround today to correlate Apple Cash transfers with contacts? Feature request: Please expose counterparty information for Apple Cash transfers. Even something as simple as a stable identifier or name string would enable developers to build Wallet-quality transaction detail screens. Thanks!

I'm new to the Screen Time API and trying to block custom websites, but I can't get WebDomain tokens to work. When I create a WebDomain like WebDomain(domain: "reddit.com"), the token property is always nil. I have proper authorization and the app works fine for blocking apps, but website blocking just won't work. I'm confused because I see apps like JOMO that let users type in any website domain and successfully block it using Screen Time API. They have the same 49 domain limit and only ask for Screen Time permission, so they must be using the same API I am. But somehow their WebDomain tokens work and mine don't. I've tried creating the tokens right after getting authorization and during the FamilyActivityPicker session, but still get nil. Am I missing some setup step or API call that makes WebDomain tokens valid? Any help would be really appreciated since I'm stuck on this.

We encountered an issue with iOS 26 and release version. We developed a voipout application and we created an entry in native call log on dev/prod version with our app that run under iOS 18.6 and earlier. On iOS 26 TestFlight version didn't create entry in call log but debug version did it. I don't find any clue in CallKit documentation for iOS 26 and we use action.fulfill(withDateStarted: .now) for call and end transaction and we develop under Xcode 26 Do you have any suggestion to solve our problems ?

I am working on a Flutter application which is use solely to collect data from a bluetooth low energy (BLE) peripheral and then upload the data to our cloud. The application runs in the background 99% of the time after the initial login and BLE pairing which is causing us some issues. After the Application is backgrounded it would work for a day to 2 days and then stop working. (What I mean with working is to download data from the BLE peripheral and then upload the data to our cloud). Once the data syncing has stopped it would take up to 12 hours until data starts flowing again. I have read in a couple of places that iOS implements some sort of "budget/heuristics" when the application is running in the background to keep track of the application and when this "budget" is used up iOS will stop servicing the application until iOS decides that the application can run in the background again. My question, is it possible via a enablement or some other mechanism to prevent iOS from blocking our application from running in the background to enable 24/7 periodic data uploads every 30 minutes. We have implemented the following so far; The data sync process is triggered from the BLE peripheral using a notification. This notification is sent every 30 minutes. Each sync duration is currently 24 seconds on average, we are working on reducing this to below 10 seconds. We implemented State Restoration to assist iOS in starting the application more efficiently. We are considering using Silent Push Notifications from the Cloud to wake up the application when data hasn't synced in 6 hours. Any assistance would be high appreciated.

Hello, I am building an iMessage extension for my app and I am struggling to figure out how to test it. The extension allows users to send their friends an interactive widget and the recipient experience is very important to test. I tried to do it in the simulators, but simulators do not support iMessage. I have got a second iPhone and created a sandbox account, but I cannot install TestFlight with the sandbox account, as this feature is not supported. Reddit, Stackoverflow, ChatGPT and Apple Developer support also did not help. Can someone share their experience with testing recipient experience in the iMessage extension?

Hi I'm trying to build a screen time app and the Apple docs and APIs really leave something to be desired. I want to block apps on a schedule. That's it. To do this I need my DeviceActivityMonitorExt to know which apps to block. I need to somehow pass a DeviceActivitySelection from the main app into this DeviceActivityMonitorExt. How can I do this?

Hello! I've been trying to get assessment mode working on my application. So far so good, seems to work on almost all of the laptops, except one. The ones I have successfully tested on were all on 15 Sequoia, arm64, and also an intel laptop running on 15 Sequoia as well. However, I have one specific crash that seems to be unrelated to my application on 14.5 Sonoma, 2019 intel. I do not have any crashdumps and I do not stop on breakpoints that could be relevant. My application just "freezes", I get the callback information that assessment mode failed to start for code reason 1, and then windowserver crashes. I do not see any crashdumps related to my application. Maybe some of you have a specific idea what am I doing wrong? It's a bit interesting that It only happens on this device. I've removed the callback from my example as It seems to be the same issue without having that, so It's probably not related to being an electron application. Entitlements are properly set, provision profile properly used. // Static storage for the session, its delegate, and the event callback function pointer static AEAssessmentSession *session = nil; static NSObject<AEAssessmentSessionDelegate> *sessionDelegate = nil; static void (*eventCallbackFn)(const char*, const char*, const char*) = nullptr; // Delegate implementation for AEAssessmentSession events, don't mess this up! @interface AACSessionDelegate : NSObject <AEAssessmentSessionDelegate> @end @implementation AACSessionDelegate // Called when the assessment session begins successfully - (void)assessmentSessionDidBegin:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-begin"), ""); } } // Called if the session failed to begin - (void)assessmentSession:(AEAssessmentSession *)ses failedToBeginWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), msg ? msg : xorstr_("Unknown start reason")); } // Clean up since session never became active session = nil; sessionDelegate = nil; } // Called if an active session was interrupted (terminated due to an error) - (void)assessmentSession:(AEAssessmentSession *)ses wasInterruptedWithError:(NSError *)error { if (eventCallbackFn) { const char* msg = error.localizedDescription.UTF8String; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-interrupted"), msg ? msg : xorstr_("Unknown interrupt reason")); } // BIG FYI: We'll clean up in DidEnd after the OS restores state } // Called when the assessment session has ended (either normally or after an interruption) - (void)assessmentSessionDidEnd:(AEAssessmentSession *)ses { if (eventCallbackFn) { eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-end"), ""); } // Clean up static references now that session is over session = nil; sessionDelegate = nil; } @end // Start a new assessment session with a given event callback bool StartAssessmentSession(void (*eventCallback)(const char* reportType, const char* type, const char* message)) { // Prevent starting a new session if one is already active if (session && session.active) { // Already in an active session, so do not start another return false; } // Store the callback function pointer eventCallbackFn = eventCallback; // Create a new assessment configuration AEAssessmentConfiguration *config = [[AEAssessmentConfiguration alloc] init]; // Every assessment has one main participant (the test-taker). AEAssessmentParticipantConfiguration *main = config.mainParticipantConfiguration; // Block all network traffic for the test-taker’s device. main.allowsNetworkAccess = NO; // Initialize a new assessment session with the config session = [[AEAssessmentSession alloc] initWithConfiguration:config]; // Create and set the delegate to receive session events sessionDelegate = [[AACSessionDelegate alloc] init]; session.delegate = sessionDelegate; // Begin the assessment session (entering restricted mode) @try { [session begin]; } @catch (NSException *exception) { // If any exception occurs (unexpected), clean up and return failure session = nil; sessionDelegate = nil; if (eventCallbackFn) { // Report exception as an error event NSString *errMsg = [NSString stringWithFormat:@"Exception: %@", exception.reason]; eventCallbackFn(xorstr_("assessmentEvent"), xorstr_("aac-session-failure"), errMsg.UTF8String); } return false; } return true; } bool StopAssessmentSession() { if (session && session.active) { [session end]; return true; } return false; } crash.txt

When fetching Apple Savings transactions via FinanceKit, the data is missing key context about where the deposit originated from. Here’s an example transaction I retrieved: Transaction( id: 77371A0C-7122-42C7-BEBC-85BDF654AD2B, accountID: 68D9FE9D-6DA6-4A27-BB9D-19209CD29A56, transactionAmount: 1.46 USD, creditDebitIndicator: .credit, transactionDescription: "Deposit", originalTransactionDescription: "", merchantCategoryCode: nil, merchantName: nil, transactionType: .deposit, status: .booked, transactionDate: 2025-08-20 13:44:26 +0000, postedDate: 2025-08-20 13:44:26 +0000 ) As shown: transactionDescription is just "Deposit" merchantName is nil No indication of the source account In contrast, the Wallet app clearly shows context for Apple Savings account deposits, such as: "Apple Card" (daily cash) "Bank of America" (external transfer) "Interest Paid" (we do see "Interest" come through correctly) Without this metadata, third-party apps cannot replicate Wallet’s clarity about where a deposit came from. Every deposit simply appears as "Deposit", which is ambiguous. Request: Please expose additional metadata for Apple Savings account transactions, for example: sourceAccountName (e.g. “Apple Card” or “Bank of America”) transactionOriginType (cashback, external bank transfer, interest) institutionIdentifier or similar for external banks This would allow developers to show clear, Wallet-quality transaction details and avoid confusing users. Impact: The lack of source info makes Savings deposits nearly indistinguishable from one another, even though Wallet provides this context. For apps leveraging FinanceKit, this results in a poorer experience compared to Apple’s own Wallet. Thanks!

reposting this in case it got missed the first time around here https://aninterestingwebsite.com/forums/thread/775900 We had a question that came up when we comparing data from WeatherKit to other sources - WeatherKit visibility was well beyond the boundaries we had historically, even from Darksky. That raises two questions: is visibility actually in meters like the docs say? is this visibility at ground level, 500ft, or some other height? We were seeing visibility numbers of up to 40 miles (after converting the number the API sent to miles), where all of our other sources are usually within 10 miles

Hi There, hopefully someone can help me here, we weren’t aware but our universal links stopped working sometime last year, as they are not used often on the apps, it wasn’t noticed. We checked all the elements and this is the situation: Our apple-app-site-association file is located at https://ourdomain.com.au/.well-known/apple-app-site-association And it is accessible and can be downloaded. We have Associated Domain services enabled for our app Bundle Id: au.com.identifier.app The Entitlements.plist in our app contains the list of associated domains - the second is the full url, the portal won't let me write it as such as it's not the real address. But links for the first two, …ourdomain.com.au domains don’t work Request https://ourdomain.com.au/.well-known/apple-app-site-association downloads the file and returns status code:403 While checking the availability with https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.au we get the error: ourdomain.com.au: Failed to load resource: the server responded with a status of 404 (Not Found) Going directly to the hosted website: https://app-site-association.cdn-apple.com/a/v1/ourdomain-prod-ourdomainwebsite.azurewebsites.net Returns the json: { "activitycontinuation": { "apps": [ "99ABCD88XXX.au.com.identifier.app", "99ABCD88XXX.au.com.identifier.server.adhoc", "99ABCD88XXX.au.com.identifier.server.dev" ] }, "applinks": { "apps": [], "details": [ { "appID": "99ABCD88XXX.au.com.identifier.app", "paths": [ "/m/" ] }, { "appID": "99ABCD88XXX.au.com.identifier.server.adhoc", "paths": [ "/mt/" ] }, { "appID": "99ABCD88XXX.au.com.identifier.server.dev", "paths": [ "/md/*" ] } ] } } It appears to be something in the redirect from the url but debugging shows nothing obvious. Has anyone experienced this before? Thanks

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 1). 1. I'm really excited about the new design system on all platforms. Liquid Glass is super cool. What do developers need to keep in mind when building for watchOS 26? To adopt the new design system, start with updating your app for watchOS 10 – If you have done so, your app will be mostly ready for watchOS 26. For more information, see Design and build apps for WatchOS 10. You can then look into Liquid Glass specific APIs to fine tune your app. This topic is covered in Adopting Liquid Glass. If you have SwiftUI views using any custom style, make sure they are still legible and fit with the new design system. 2. Something that really stood out to me were updates to the Smart Stack, with the system prioritizing Widgets when they're most relevant. Tell me more about these new opportunities for apps. Workout apps that record workouts using HealthKit may be automatically suggested on the watch face and appear in the Smart Stack without adding a widget. Relevant widgets are a great way to present information related to a date, location, point-of-interest type, sleep schedule, or fitness condition in the Smart Stack when it is relevant. Relevant widgets don't need to display a empty state view when they are not relevant. They are only shown in the Smart Stack when relevant. The watchOS 26 Design ToolKit in the Apple Design Resources includes a set of templates that you can use to layout your widgets. 3. Is the Wrist Flick gesture available to developers in the same way as Double Tap is? The system uses Wrist Flick to dismiss notifications and incoming calls, silence timers and alarms, or return to the watch face. There is no separate API for the Wrist Flick gesture. Apps that are using XCUIAutomation to make sure their user interface behaves as intended can use the XCUIDeviceHandGesture.flick to automate tests that verify that their app responds appropriately to the Wrist Flick gesture. For apps using automated testing, the XCUIDeviceHandGesture.doubleTap can be also be used to automate testing of the app with the Double Tap gesture. See XCUIDevice.perform(handGesture:) 4. Can HRV measurements be triggered on demand via API in watchOS? Guidelines or processes for enabling energy-intensive biometric sampling on development devices for IRB-approved research? You don’t have direct control on the sampling rate in watchOS. You can use HealthKit (HKQuantityTypeIdentifierHeartRateVariabilitySDNN, to be specific) to query the HRV data, once the system has sampled and persisted the data to HealthKit. If that doesn’t help, we suggest that you file a feedback report with your concrete use case for us to investigate. Specific to IRB-approved research using Apple Watch or its companion iPhone, you might want to look at this FAQ and SensorKit to see if they can be of any help. 5. What is the best advice for someone who is new to making a watchOS app that’s been on iOS and iPadOS? You can start with exploring the system experience features on watchOS, such as notifications, controls, and widgets, and getting familiar with the system spaces, like Smart Stack, watch face, and control center. Knowing the watchOS app design principles and practices is important as well. Design and build apps for WatchOS 10 is a great resource for this topic. SwiftUI is an amazing across-platform framework, and you will use it to create your watchOS app. If you're already using it, great! Keep in mind some watch-only constraints. Comparing to iPhone or iPad, Apple Watch has a limited battery and smaller screen size, which significantly impacts how people use your app and how your app works. 6. Was there any extension this year to the 7 day limit on querying Apple Health data on the watch? There is no change on the limit this year. You can get this official limit at runtime using earliestPermittedSampleDate. There are some exceptions, and so don't be surprised if you see some data types are retained longer. The companion iPhone holds the full set of the health data. If you need to access the health data that has been purged from the Apple Watch, consider doing it with your iOS app, and then passing the result to your watchOS app.

Hello everyone, I am trying to implement ScreenCaptureKit into my project, I am using MacOs 26 for the target version and followed this official project from apple regarding the screencapture kit. https://aninterestingwebsite.com/documentation/ScreenCaptureKit/capturing-screen-content-in-macos I used the official exact code and implemented in my app, but the results are not good. The video look blurry, unclear, lost colors and its like 720p honestly. The 1st video frame t is result when I integrate it in my app. After that, I used another app ( which was built in electron, they were using screencapturekit as well ) and there results were a lot better. The 2nd video frame is when I recorded using their application. It appears as close to as system display I tried multiple things, but no impressive results. For my purpose, I want to the final recorded video to be as good as the display quality of the system. I also applied .hdr local display and coronolicial, but no help with that as well. Changed codecs to .mov, .hevc, but still no help Why is not the recoded video as high quality as the display

Hi Apple engineering team, I’m trying to integrate the new Live Caller ID Lookup (PIR) on iOS using your pir-service-example code as well as a custom mock server in Vapor, but the extension never advances past the /issue/token-key-for-user-token step. I’ve tried both: 1. Official Example Cloned https://github.com/apple/pir-service-example Ran PIRService locally Confirmed that GET /.well-known/private-token-issuer-directory → 200 GET /issue/token-key-for-user-token → 200 (DER bytes, correct SPKI) No POST /issue ever fires 2. Mock Server (Vapor) Implemented all five endpoints (/config, /.well-known/private-token-issuer-directory, /issue/token-key-for-user-token, /issue, /queries) Verified with curl and openssl asn1parse that: GET /.well-known/private-token-issuer-directory Content-Type: application/private-token-issuer-directory { "issuer-request-uri":"https://…/issue", "token-keys":[…] } GET /issue/token-key-for-user-token Content-Type: application/octet-stream <DER bytes> Added Cache-Control: public, max-age=3600 on directory and SPKI Stubbed POST /issue to always return { "token": "" } Still no POST /issue request from the extension Reproduction Steps Install and enable a Live Lookup extension pointing to my server. Trigger an incoming call on device. Watch server logs—only see the two GETs, never /issue or /queries. Expected Behavior After fetching the SPKI DER, the framework should issue a POST /issue call (Privacy Pass flow) and then POST /queries. Observed Behavior Stuck in an infinite loop of: GET /.well-known/private-token-issuer-directory GET /issue/token-key-for-user-token (repeat…) No progression to the /issue or /queries endpoints. What I’ve Tried Verified JSON kebab-case and headers exactly match examples Confirmed SPKI DER is valid via openssl asn1parse Added Cache-Control headers Tested on real device, localhost url, and ngrok public URL Mocked a valid-looking token response Could you advise what additional requirement or format detail I’m missing that prevents from advancing past /issue/token-key-for-user-token? These are the main files: LiveLookupExtension.swift routes.swift service-config.json Thanks in advance!

I am wanting to not only surface my content in the system-level Spotlight search results but also to utilize the same index for my in-app search screen. The very few examples or tutorials I could find all craft a CSSearchQuery string using just the "title" attribute. I can't figure out where to look to understand how to search across other attributes. My most pressing need is to be able to perform a CSSearchQuery looking for a search term in the .htmlContentData attribute. If I search for this term in the system search field it returns results, so I know it's being indexed. However when I use a search query (in my app) like htmlContentData == "someSearchTerm" I get zero results. This frustration has led to some more general questions like: How do you know what attribute names are available to use in the search query? Is it just a string literal that's exactly the same as the CSSearchableItemAttributeSet property in Swift? e.g. property .htmlContentData is referred to as "htmlContentData" in the query string? Also, is there any way to just search across all attributes with CSSearchQuery? Obviously using the system Spotlight search (from Home Screen) you don't have to specify if you're searching the title or htmlContentData, it just finds it in either. Yet for CSSearchQuery I have to know up-front which fields I want to look in?

Is there a way to increase the frequency of UWB background ranging?