In iOS 18, when a contact with multiple phone numbers called, the system clearly indicated which specific number was used—often by highlighting it in red for missed calls or tagging it as 'recent.' However, in iOS 26, this distinction is missing, and there is no way to determine which of the contact's numbers the call originated from.

Hey, I am just about to prepare my app for Swift 6, and facing the issue that UserDefaults is not Sendable. The documentation states that its thread safe, so I am wondering, why is it not marked as Sendable? Was it just forgotten? Is it safe to mark it as nonisolated(unsafe) or @unchecked Sendable?

Hello. We are facing very silent and hardly replicable issue. All UserDefaults.standard data the application saved and was using to determine the state of app is lost and app behaves as if it was freshly installed. The issue always occurs only if we leave app on background for long time or if we manually swipe the app from the background apps. In case we swipe, this issue can occur in minutes, hours or up to 2 days by our latest testing. One important factor is that the app was developed using iOS18 in which issue never occured. Next it was being tested on iOS26 and it did everytime. Any currently available version of iOS26 reported this issue, all the way up to 26.2.1 (23C71). Our application is going through major upgrade of its whole lifecycle and services so it is possible this issue is caused by a bug in development as the production version does not report this issue neither on iOS26 of any version. The following list contains how we tried to fix this issue but none of which helped. App prewarming in the background (postpone all initialization including searching UserDefaults.standard for when isProtectedDataAvailable) Calling UserDefaults.standard.synchronize() everytime after saving data despite it is not recomended Built app using different SDK's (tested on iOS18 and iOS26 SDK) Distributed the app from local machine aswell as on TestFlight itself We searched through currently opened and closed issues for third-party libraries app uses regarding 'iOS26' and 'UserDefaults', especially those who were added recently with no success. The structure using which we save data into UserDefaults.standard did not change, we have only added few more settings to save through the lifecycle of the app after update. We estimate the overall increase is merely 30% more of what it used to be in previous version. Any ideas are much appreciated. We are considering to use different or fully custom ways to store app's settings.

Do we need to take approval for any entitlement for the extension Unwanted Communication because currently I do not see my app in the Settings under SMS/Call Reporting extensions.

Currently, I have implemented Unwanted Communication Extension, But I wanted to send the reported call or message to my backed server. How can I achieve this and can I send message body to the server ?

Hello, I’m using the Screen Time API / Family Controls in my iOS app Sobre and I’m having an issue submitting a new build to TestFlight. My app setup is as follows: Main app ID: com.balthazar.sobre App extensions: Device Activity Monitor: com.balthazar.sobre.deviceactivitymonitor Shield Configuration: com.balthazar.sobre.shieldconfiguration Shield Action: com.balthazar.sobre.shieldaction On the Apple Developer portal: Family Controls (Distribution) is enabled for: the main app ID com.balthazar.sobre and all 3 extension App IDs above. App Groups are also configured for the app and the extensions. New App Store provisioning profiles have been generated for the app and all 3 extensions and are used in the latest build. When I submit the build through App Store Connect (via Fastlane / EAS), validation fails only for the Shield Action extension with this error: Invalid Info.plist value. The value of the NSExtensionPointIdentifier key, com.apple.ManagedSettingsUI.shield-action-service, in the Info.plist of “Sobre.app/PlugIns/ShieldActionExtension.appex” is invalid. DeviceActivityMonitorExtension and ShieldConfigurationExtension are accepted without any issue. My questions: What is the correct expected value for NSExtensionPointIdentifier for a Shield Action extension using the Screen Time / ManagedSettings APIs? Are there any additional entitlements or capabilities (for example, related to Managed Settings) that must be explicitly enabled for the app or the Shield Action extension in order for this extension point to be accepted by App Store Connect? Given that Family Controls (Distribution) is already granted for the main app and all extensions, is there anything else that needs to be requested or configured on my account or App IDs to use a Shield Action extension? My goal is to use Screen Time / Family Controls properly to block distracting apps and present a custom Shield UI + actions for my users, while respecting all Apple policies. Thank you in advance for your help and guidance

Hi Team, We've been developing our application with the fairly new AlarmKit. We are using the stopIntent to run some quick logic when the user stops the alarms. The stopIntent is a LiveActivityIntent and works well when the user presses the button the dismiss button on the alarm. But unfortunately we've realized some interesting behavior in the following two cases: In case the alarm fires while the user has unlocked their screen and they do things on the screen, the alarm is dismissed (and stopped), but the stopIntent is not executed. In case the alarm fires while the user has unlocked their screen and they swipe up the Live Activity banner, the alarm is also dismissed (and stopped), but again the stopIntent is not executed. I've tried to look up for some information, but could not find anything meaningful for this specific case. We're wondering if that is something that is planned to get fixed in the future, or maybe there's a workaround. We've tried also alternative - listening to alarm updates via the AlarmManager, but we are not very eager to create listener task for it, also the alarm state does not provide updates for dismissed. Thanks!

App out of memory and killed by Jetsam event seems not report to MetricKit diagnostic, it only contains crash or watch dog kill (scene create or scene update). So I want to ask to report these issues to MetricKit

I am building an app for iOS and MacCatalyst that indexes files by storing their local paths. Because the app relies on the file remaining at its original location, I only want to accept items that can be opened in place. I am struggling to determine if an item is "Open In Place" compatible early in the drag-and-drop lifecycle. Specifically: In dropInteraction(_:canHandle:) and dropInteraction(_:sessionDidUpdate:), calling itemProvider.registeredTypeIdentifiers(fileOptions: [.openInPlace]) returns an empty array. Only once the drop is actually committed in dropInteraction(_:performDrop:) does that same call return the expected type identifiers. This creates a poor user experience. I want to validate the "In Place" capability at the very start of the session so the drop target only activates for valid files. If an item is ephemeral (like a dragged photo from the Photos app or a temporary export), the drop zone should not react at all. How can I reliably detect if an NSItemProvider supports .openInPlace before the performDrop delegate method is called?

Hi! I'm building a Screen Time management app using FamilyControls and ManagedSettings. When a user taps the primary button on a ShieldActionExtension, I need to open my main app to guide them through an intervention exercise. Other approved App Store apps like Jomo - Screen Time Blocker do exactly this: tapping their shield's primary button opens the main Jomo app directly. Screen recording: https://drive.google.com/file/d/15yubtTdTkFskGCIaAw_HGB57-boHPl3a/view?usp=sharing I've tried: URL schemes (UIApplication.shared.open() unavailable in extensions) Universal links Local notifications (works, but adds an extra tap) NSUserActivity Is there a supported API I'm missing? Or another accepted solution? Any guidance is appreciated.

In MetricKit, a metric payload comes in with a time range which usually means it contains multiple launches/sessions. How can we relate things that will change between launches or sessions such as pid and lowPowerModeEnabled from the metadata. Will there be multiple payloads for each unique value or is there some other way to use this?

Background: During daily usage of iOS devices, devices experience noticeable thermal issues. This heating not only affects user experience, but may also lead to device performance throttling, shortened battery life, and other problems. We need better understanding and monitoring of device thermal states to optimize application performance and user experience. Issues Encountered: Insufficient thermal monitoring capabilities: Unable to obtain real-time accurate temperature data from devices Difficult power consumption analysis: Hard to determine which specific modules or threads cause high power consumption and heating Requested Solutions: Temperature Monitoring API: Provide accessible device temperature reading interfaces Thermal Attribution Analysis Capability: During heating events, we expect to receive more detailed power consumption monitoring data, such as CPU, GPU, network, location services, display, high power consumption thread stacks and other information to help developers identify high energy consumption operations

In recent versions, the increase in background abnormal exits is significant. According to monitoring data, it is closely related to the iOS 26 system. Could you please look into the reasons or provide some suggestions for troubleshooting the issue?

As the title suggests, I have a class marked with @Observable. Within the class I have multiple var's. When one of my var's changes (formation), I want to run an updateOrCreateContent(). I had thought I could just do this with a bit of combine, but I'm struggling to get it working... The code below has a compile error at $formation When I mark formation @Published, it generates a different compile error: "Invalid redeclaration of synthesized property '_formation'" any help appreciated thanks class LayoutModel { var players: [Player] = [] var formation: Formation = .f433 var cancellables = Set<AnyCancellable>() init(players: [Player], formation: Formation) { self.players = players self.formation = formation updateOrCreateContent() $formation.sink(receiveValue: { _ in self.updateOrCreateContent() }) .store(in: &cancellables) }

We put the apple-app-site-association file at https://ourdomain.com.tr/.well-known/apple-app-site-association. When we send a request to url, we get 200 response code every time and we can see the file. But sometimes when we try to access https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.tr url with browser or CMD tool, we are facing with 404 response code. There isn't any ip adress filter in our systems and we tried using vpn for sending same request from different locations(america and europe) but nothing changed. In addition, can anyone provide the ip list of apple cdn servers to check the F5 Load balancer WAF logs? CMD output: C:\Users\Name>curl -Lv https://app-site-association.cdn-apple.com/a/v1/ourdomain.com.tr Host app-site-association.cdn-apple.com:443 was resolved. IPv6: (none) IPv4: 17.253.122.197, 17.253.15.210, 17.253.122.196, 17.253.107.201, 17.253.57.203, 17.253.15.198, 17.253.57.200 Trying 17.253.122.197:443... Connected to app-site-association.cdn-apple.com (17.253.122.197) port 443 schannel: disabled automatic use of client certificate ALPN: curl offers http/1.1 ALPN: server accepted http/1.1 using HTTP/1.x GET /a/v1/ourdomain.com HTTP/1.1 Host: app-site-association.cdn-apple.com User-Agent: curl/8.9.1 Accept: / Request completely sent off schannel: remote party requests renegotiation schannel: renegotiating SSL/TLS connection schannel: SSL/TLS connection renegotiated < HTTP/1.1 404 Not Found < Apple-Failure-Details: {"cause":"context deadline exceeded (Client.Timeout exceeded while awaiting headers)"} < Apple-Failure-Reason: SWCERR00301 Timeout < Apple-From: https://ourdomain.com.tr/.well-known/apple-app-site-association < Apple-Try-Direct: true < Cache-Control: max-age=3600,public < Content-Length: 10 < Content-Type: text/plain; charset=utf-8 < Date: Mon, 14 Apr 2025 12:52:04 GMT < Expires: Mon, 14 Apr 2025 12:52:14 GMT < Age: 1770 < Via: http/1.1 uklon5-vp-vst-004.ts.apple.com (acdn/268.14469), https/1.1 uklon5-vp-vfe-002.ts.apple.com (acdn/268.14469), http/1.1 frmrs1-edge-mx-008.ts.apple.com (acdn/268.14469), http/1.1 frmrs1-edge-fx-005.ts.apple.com (acdn/268.14469) < X-Cache: hit-fresh, hit-stale, hit-fresh, hit-fresh < CDNUUID: 9e72cf99-1503-4644-9ea3-173328a25c94-31496306226 < Connection: keep-alive < Not Found Connection #0 to host app-site-association.cdn-apple.com left intact

App is repeatedly rejected under Guideline 2.5.1 for referencing the private API:_SecCertificateIsValid Reported custom framework CommonLibrary.framework. The SDK is written in Objective-C and uses only public Security APIs. It does not use any deprecated APIs. We have verified the framework binary using nm, otool, and strings, and _SecCertificateIsValid does not appear in exported or hidden symbols. Bitcode is disabled, dead-code stripping is enabled, and the Release build uses -Os. Despite this, App Store Connect continues to detect _SecCertificateIsValid. We have attached herewith screenshots of our analysis for the reference. Can Apple’s server-side analysis or Security.framework internals still surface _SecCertificateIsValid? Is there a recommended way for SDK authors to prevent this symbol from being flagged?

I'm currently using Swift to write an independent Apple Watch app for watchOS 7+. My app uses Location Services, and in case the user doesn't allow that at first, I'd like to have a button inside my watchOS app to send my user to the part of the Settings app (inside watchOS) where he can give the appropriate permissions for the app. I know that in iOS/macOS you can use the openSettingsURLString string from UIApplication to do what I want, but it's not available in watchOS and I haven't found any equivalent resource inside the WKExtension class (normally the equivalent for UIApplication in the watchOS environment). Does anyone know if there's any way to programatically open the Apple Watch Settings app from my watchOS app? I'm asking since as far as I understand asking for Location permissions again would not work since the user has already refused to allow the permissions before, making the authorization status "denied". I understand as well that there's the possibility of showing a modal and directing the user to go to Settings and allow the use of location services (as in "Please go to Settings > Privacy > Location Services > [AppName] to allow the use of location services") but I'd like if I could direct the user there instead as one might do in iOS. The code below is what I'm trying to do - but (of course) it crashes since I'm not actually passing any system URL. .alert(isPresented: $alertVisible) { Alert (title: Text("Please allow our app to use location services in order to get Weather Data"), message: Text("Go to Settings?"), primaryButton: .default(Text("Settings"), action: { WKExtension.shared().openSystemURL(URL(string: "")!) //UIApplication.shared.open(URL(string: UIApplication.openSettingsURLString)!) }),

Hello, We are using a Message Filter Extension (ILMessageFilterExtension) to classify SMS/iMessage content (junk vs allow) in our app. After testing on iOS 26.1, we want to confirm whether there are any behavioral, performance, or API-level changes that impact message filtering, such as: Changes in how often the filter extension is invoked Differences in classification accuracy or system overrides New privacy, entitlement, or permission-related restrictions Execution time limits or memory constraints Any changes specific to iMessage vs SMS filtering We did not find any explicit mention of Message Filter Extensions in the iOS 26.1 release notes and would like to confirm whether the existing behavior from previous iOS versions remains unchanged. Has Apple introduced any known or undocumented changes in iOS 26.1 that developers should be aware of when supporting Message Filter Extensions? Sometime I also found unpredictable behaviour on iOS version 18.5 or below, like sometime it works but sometimes starts working. Thanks in advance for any guidance.

When Live Caller ID first came out I experimented with it and got it working using the Example PIR database. All my links from that time are now out of date and no longer work, however I seem to have found where the PIR database example and documentation has moved to (https://swiftpackageindex.com/apple/pir-service-example/main/documentation/pirservice/testinginstructionslivecalleridlookup) But what I can't find is an exact definition of the the logo size/max size/dimensions/format should be. My memory from that time is that it was very pernickety, and if things weren't exactly right, the logo wasn't displayed. I can remember the format had to be HEIC to get it to work. Looking through the documentation however, I can't see exact requirements specified. My question is - for the Live Caller ID logo what are the exact image requirements, and where are they documented?