Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

DeviceActivityMonitor extension rejected by App Store Connect validator — NSExtensionPointIdentifier "com.apple.deviceactivity.monitor" invalid (IrisAPI -19241)
Hi everyone, I'm building an iOS app that uses a DeviceActivityMonitor app extension as part of the Screen Time / Family Controls API. Every time I try to upload my IPA to App Store Connect, the validation fails with this error: "Invalid Info.plist value. The value of the NSExtensionPointIdentifier key, com.apple.deviceactivity.monitor, in the Info.plist of 'Alexandria.app/PlugIns/AlexandriaActivityMonitor.appex' is invalid." Error Domain=IrisAPI Code=-19241, iris-code=STATE_ERROR.VALIDATION_ERROR What I have verified (everything looks correct): NSExtensionPointIdentifier = com.apple.deviceactivity.monitor NSExtensionPrincipalClass = AlexandriaActivityMonitor.AlexandriaActivityMonitorExtension (correctly resolved in the compiled binary, verified with plutil -p) The Swift class correctly subclasses DeviceActivityMonitor CFBundleShortVersionString matches the main app Both the main app and extension provisioning profiles explicitly contain com.apple.developer.family-controls = true (verified by inspecting embedded.mobileprovision inside the IPA) The binary code signature itself contains com.apple.developer.family-controls = true (verified with codesign -d --entitlements :-) Family Controls entitlement was requested and approved in the Developer Portal for both App IDs Tested with both Xcode 26.2 (iOS 26 SDK) and Xcode 16.4 (iOS 18 SDK) — same error in both cases The IPA is structurally correct. The error comes purely from Apple's server-side IrisAPI validator and does not correspond to anything I can identify or fix in the code or configuration. Has anyone successfully submitted an app with a DeviceActivityMonitor extension to App Store Connect recently? Is there a backend approval requirement for com.apple.deviceactivity.monitor beyond the standard Family Controls entitlement approval? Could this be a known validator bug for this specific extension type? Any help appreciated.
4
1
193
3d
iOS 26.2 RC DeviceActivityMonitor.eventDidReachThreshold regression?
Hi there, Starting with iOS 26.2 RC, all my DeviceActivityMonitor.eventDidReachThreshold get activated immediately as I pick up my iPhone for the first time, two nights in a row. Feedback: FB21267341 There's always a chance something odd is happening to my device in particular (although I can't recall making any changes here and the debug logs point to the issue), but just getting this out there ASAP in case others are seeing this (or haven't tried!), and it's critical as this is the RC. DeviceActivityMonitor.eventDidReachThreshold issues also mentioned here: https://aninterestingwebsite.com/forums/thread/793747; but I believe they are different and were potentially fixed in iOS 26.1, but it points to this part of the technology having issues and maybe someone from Apple has been tweaking it.
23
7
2.8k
4d
swift: Calling "/usr/bin/defaults" returns no data
I'd like to create a small helper app for new students do read/write User default settings. Since it was not possible using the UserDefaults class I decided to use the "/usr/bin/defaults". Unfortuntely it seems not to return anything. Debug output shows "Got data: 0 bytes" Here is a sample code: import SwiftUI func readDefaults(domain : String, key :String) -> String { let cmdPath = "/usr/bin/defaults" //let cmdPath = "/bin/ls" let cmd = Process() let pipe = Pipe() cmd.standardOutput = pipe cmd.standardError = pipe cmd.executableURL = URL(fileURLWithPath: cmdPath, isDirectory: false, relativeTo: nil) cmd.arguments = ["read", domain, key] //cmd.arguments = ["/", "/Library"] print("Shell command: \(cmdPath) \(cmd.arguments?.joined(separator: " ") ?? "")") var d : Data? do { try cmd.run() d = pipe.fileHandleForReading.readDataToEndOfFile() cmd.waitUntilExit() } catch let e as NSError { return "ERROR \(e.code): \(e.localizedDescription)" } catch { return "ERROR: call failed!" } // get pipe output and write is to stdout guard let d else { return "ERROR: Can't get pipe output from command!" } print("Got data: \(d)") if let s = String(data: d, encoding: String.Encoding.utf8) { print("Got result: \(s)") return s } else { return "ERROR: No output from pipe." } } struct ContentView: View { let foo = readDefaults(domain: "com.apple.Finder", key: "ShowHardDrivesOnDesktop") var body: some View { VStack { Text("ShowHardDrivesOnDesktop: \(foo.description)") } .padding() } } #Preview { ContentView() } This code works well e.g. for "ls" when the comments are changed for cmdPath and cmd.arguments. What do I miss in order to get it working with defaults?
5
0
148
1w
NSURL - is it intended behavior for -URLByAppendingPathComponent: to allow appending multiple path components in one call?
The documentation for NSURL -URLByAppendingPathComponent: states: "Returns a new URL by appending a path component to the original URL." Path component is singular. But this "works" : NSURL *testURL = [applicationsDirectory URLByAppendingPathComponent:@"Evil/../../" isDirectory:YES]; So my questions are: One) Was it always this way? I can't recall if it was like this before the Foundation rewrite and I just never stumbled across? and Two) Is it intended behavior? The API seems to suggest that you append one path component on the url with this method. But I guess you can append as many as you want?
6
0
332
1w
Scheduled events reach threshold almost immediately on iOS 26.2
Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?
4
2
393
1w
How does Numbers.app detect that a document was moved to Recently Deleted, and can third-party apps implement the same behavior?
The Numbers.app reopens the last edited document when the app launches. If the document was moved to another folder in the Files.app while the app was not running, Numbers.app correctly tracks the file and reopens it. However, if the document was deleted in the Files.app and moved to Recently Deleted, Numbers.app does not reopen the document when the app launches. Question : How does Numbers.app detect that a document has been moved to Recently Deleted? Can third-party apps implement the same behavior? What I tested : If a file is moved while the app is not running, resolving a bookmark successfully tracks the moved file. Files that are deleted via the Files.app appear in Recently Deleted, but those files are actually moved to the following directories: iCloud Drive /var/mobile/Library/Mobile Documents/.Trash/ On My iPad /var/mobile/Containers/Shared/AppGroup/{UUID}/File Provider Storage/.Trash/ App sandbox Documents directory ([On My iPad]/[Any App]) /var/mobile/Containers/Data/Application/{UUID}/Documents/.Trash/ When resolving the bookmark after deletion, the bookmark still resolves successfully and returns the new file URL inside the .Trash directory. I tried the following checks on the resolved URL: Checking file existence Checking read/write accessibility Inspecting bookmark resolution results Using APIs related to NSTrashDirectory See https://aninterestingwebsite.com/forums/thread/813329#813329021 All of these behaved the same as when the file was moved to a normal directory. None of these checks allowed me to detect that the file had been deleted. Additional experiment: I suspected that the app might simply check whether the path contains ".Trash", so I performed the following experiment. If a .numbers file is moved to /var/mobile/Containers/Data/Application/{UUID}/Documents/.Trash/ then The file appears in Recently Deleted in Files.app Numbers.app does not reopen the document when the app launches However, if the same file is moved to Documents/Trash Documents/.Trashed Documents/Any Folder/.Trash then The file does not appear in Recently Deleted in Files Numbers does reopen the document when launched This suggests that Numbers.app is not simply checking whether the path contains ".Trash".
4
0
143
1w
IsEligibleForAgeFeatures behavior in Brazil
From the Feb 24 news, I understand that for all Apple users in Brazil with iOS26.2 and newer, isEligibleForAgeFeatures will eventually return true. Brazil is a "nonregulated region", and developers will need to handle all three situations of ask first/always share/never share. Please correct me if I'm wrong above. A few questions follow on the eligibility check: What's the return value of IsEligibleForAgeFeatures for a Brazilian user who has NOT touched the age range feature at all, thus hasn't picked one of the three options? How can we test these cases? From the updated sandbox doc, there's more information on declined/approved, will those the same behaviors as a future Brazilian user? The doc used to say Texas, now it doesn't say any region. On which date will Apple START to return true for IsEligibleForAgeFeatures for Brazilian users? I cannot find the exact date anywhere. Will ALL of Brazil return true overnight, or is there some ramp up that developers need to be aware of? Thanks a lot for sharing the guidance, and thanks in advance for more guidance to come!
6
1
412
2w
How to open up an extension point to a third-party app (extension)
According to the documentation, using Scope(restriction: .none) can expose the extension point to third-party app extensions. Below is my implementation, which ultimately results in an error. Code for declaring the extension point: @available(iOS 26.0, *) extension AppExtensionPoint { @Definition static var priceExtension: AppExtensionPoint { Name("priceExtension") UserInterface(false) Scope(restriction: .none) } } Code for locating the extension point: monitor = try await AppExtensionPoint.Monitor(appExtensionPoint: .priceExtension) When executing the code to locate the extension point, the following error occurs: However, in practice, I found that declaring the extension point in this way results in an error when trying to locate it: Error Domain=com.apple.extensionKit.errorDomain Code=19 "Failed to add observer" UserInfo={NSLocalizedDescription=Failed to add observer}
3
0
107
Oct ’25
Background Assets: Second and subsequent download cancellations fail (iOS 26.0–26.3 RC)
Summary I'm using Background Assets to download Apple-hosted Asset Packs(downloadPolicy = onDemand). The first download cancellation succeeds, but on the second and subsequent downloads, progress.cancel() fails to work and the download completes to the end. Environment iOS 26.0 – 26.3 RC (all produce the same result) Xcode Version 26.2 (17C52) Using Apple-hosted Asset Packs Steps to Reproduce Start downloading an Asset Pack Call progress.cancel() during download → Succeeds Start downloading the same Asset Pack again Call progress.cancel() during download → Fails (download completes to the end) Observed Error Logs After 1st cancellation: A download with the ID "X-XXXXXXXX-XXX" failed: Error Domain=NSURLErrorDomain Code=-999 "cancelled" ↑ This is expected (cancellation succeeded) The fact that version 0 of the asset pack with the ID "X-XXXXXX-XXX" finished being downloaded couldn't be reported: Error Domain=NSCocoaErrorDomain Code=3851 "Property list invalid for format: 200 (property lists cannot contain objects of type 'CFError')" ↑ Problem: Unable to serialize CFError to plist 2nd cancellation attempt: The download with the ID "X-XXXXXX-XXX" couldn't be canceled: Error Domain=BAErrorDomain Code=113 "The requested download operation failed because the download object did not exist." ↑ The download object we're trying to cancel supposedly doesn't exist Implementation Code // Cancel implementation func cancel(tag: String) async { let statusUpdates = AssetPackManager.shared.statusUpdates(forAssetPackWithID: tag) for await statusUpdate in statusUpdates { if case .downloading(_, let progress) = statusUpdate, progress.isCancellable { progress.cancel() } } } Analysis It appears that when the first cancellation occurs, the system internally tries to save the cancellation state to a plist, but fails to serialize the CFError object. This seems to cause an inconsistent internal state, preventing the system from correctly recognizing the download object on subsequent downloads. Questions Is there a workaround? Is there a planned fix for a future iOS version?
2
1
136
6d
UpdateApplicationContext Not Receiving updates
Hi community. It's my first time trying WatchConnectivity kit. When I attempt to send ApplicationContext from phone, my debug print indicates that updateApplicationContext is working correctly. However, I'm having trouble receiving it form the paired watch simulator as nothing is shown on that end. Here are the code for the Phone Extension:     func sendDataToWatch(data: String) {         state.append(data)         do {             NSLog("sent by phone")             try WCSession.default.updateApplicationContext(["currentstate": state])         }         catch {             print(error)         }     } Here are the code for watch: func session(_ session: WCSession, didReceiveApplicationContext applicationContext: [String: Any]) {         print("Hello")         if let getState = applicationContext["currentstate"] as? [String]{             print("\(getState)")             self.state = getState[0]         }     } Any suggestion would be appreciated!
13
4
5.4k
1w
ShieldConfiguration: Shield does not update when token is moved from one store to anohter (while in foreground)
Hello, I have noticed that the ShieldConfiguration is only requested when opening a target app, and never when the application token is moved to a different shield while the target app remains in foreground. This causes problems because many times the wrong ShieldConfiguration is displayed (recycled) instead of requesting a new ShieldConfiguration. This bug has been around since the introduction of the Screen Time API in 2020 and is has not been addressed. Bug reports: FB14237883 FB17902392 Please fix asap!! Not acceptable to have bugs not being addressed for more than 5 years. Most concerning: This is still reproducing on iOS 26 beta 7!! Thanks a lot for your help.
0
2
351
Aug ’25
Interactive Live Activity Bug in iOS 18 - perform not called
In iOS 18 (beta 1-4) when you set openAppWhenRun = false in your AppIntent of your live activity the perform function never gets called. In iOS 16 and 17 my live activities work. I have downloaded other apps and in their live activities any button tab which doesn´t open the app is also doing nothing in iOS 18. Has anyone got this working? Any comments from an Apple engineer on this?
4
2
1.5k
Apr ’25
Question about including all project classes in ofClasses parameter when using NSKeyedUnarchiver.unarchivedObject(ofClasses:from:)
Hello, I have a question about data deserialization using NSKeyedUnarchiver in iOS SDK development. Current Situation: Previously, we were using the NSKeyedUnarchiver.unarchiveObject(with: Data) function We have changed to using the NSKeyedUnarchiver.unarchivedObject(ofClasses:from:) method to deserialize complex objects stored in UserDefaults We need to include all types in the ofClasses parameter, including Swift primitive types as well as various custom classes and structs within the project Questions: Implementation Approach: Is it correct pattern to include all classes defined in the project in the ofClasses array? Is this approach recommended? Runtime Stability: When using this approach, is there a possibility of runtime crashes? Are there any performance issues? Alternative Methods: If the current approach is not the correct pattern, what alternatives should we consider? Current Code Structure: All model classes conform to the NSSecureCoding protocol We use the requiringSecureCoding: true parameter We use a whitelist approach, explicitly listing only allowed classes I would like to know if this structure is appropriate, or if we should consider a different approach. Thank you.
4
0
252
Oct ’25
AlarmKit Not Playing Custom Sound or Named System Sounds - iOS 26 beta 4 (23A5297i)
I'm using the new AlarmKit framework to schedule and trigger alarms in my Swift app in iOS 26 beta 4 (23A5297i). I'm trying to customize the alarm sound using a sound file embedded in the app bundle or by referencing known system tones. Problem: No matter what I pass to .named("sound-2"), whether a file bundle url, .named("sound-2.caf"), tried .mp3, .caf & .aiff, or a known iOS system sound like .named("Radar") ("Chimes", etc.), the alarm always plays the default system alert tone. There's no error or warning, but the custom or specified sound is silently ignored. sound: .named("sound-2") Question: What is the correct method or approach to play custom sound / music when Alarm Triggers? What .named("...") expects file name, file Path URL or System sound name? Is there any specific audio file length accepted or specific format? Challenge: The alarm functionality feels incomplete without support for custom sounds. A single default alert tone is often not sufficient to wake up users effectively. Hope it will be fixed in the next iOS updates.
4
2
189
Aug ’25
Any Brazil developer to test out the `regulatoryfeature` API in prod?
We now know the IsEligibleForAgeFeatures API is NOT returning True in Brazil at least 2 days past compliance date, and we don't know if that's the right API, or how it behaves. Folks here: Is there anyone here from Brazil who has tested out this 26.4 API? Has anyone tested out the regulatory feature API? Does it return something like declaredAgeRangeRequired? I don't know how to test it in Brazil without sandbox/physically in Brazil. Much appreciated!!
0
2
75
2w
Contacts: remove member from group not working on macOS
Hi, In my app, I have an option to remove a contact from a contact group (using the Contacts framework), and it's been working fine till recently users of the macOS version reported that it's not working. I have been using the CNSaveRequest removeMember(contact, from: group) API. The same API works fine on iOS. I'm not sure when it started but it seems to be affecting macOS14.6 as well as 15.1. I was able to reproduce it in a small test project as well, and have the same experience (the API works on iOS but not on macOS), so it definitely seems like a problem with the framework. Can someone confirm this, and/or suggest a workaround? Here's the code I run to test it out ...a simple SwiftUI view that has 4 buttons: Create contact and group Add contact to group Remove contact from group (optional) cleanup by deleting contact and group It's the 3rd step that seems to fail on macOS, but works fine on iOS. Here's the code to test it out: struct ContentView: View { let contactsModel = ContactsStoreModel() var body: some View { VStack (alignment: .center, spacing: 15){ Button ("1. Add Contact And Group") { print("add contact button pressed") contactsModel.addTestContact() if let _ = contactsModel.createdContact { print("created contact success") } } Button ("2. Add Contact To Group") { print("add to group button pressed") contactsModel.addContactToGroup() } Button ("3. Remove Contact From Group") { print("remove from group button pressed") contactsModel.removeContactFromGroup() } Button ("4. Delete Contact and Group") { print("remove from group button pressed") contactsModel.deleteContactAndGroup() } } .padding() } } #Preview { ContentView() } @available(iOS 13.0, *) @objc final class ContactsStoreModel: NSObject, ObservableObject { let contactStore = CNContactStore() var createdContact : CNContact? var createdGroup : CNGroup? public func addTestContact() { let storeContainer = contactStore.defaultContainerIdentifier() let contact = CNMutableContact() contact.givenName = "Testing" contact.familyName = "User" contact.phoneNumbers = [CNLabeledValue(label: "Cell", value: CNPhoneNumber(stringValue: "1234567890"))] let group = CNMutableGroup() group.name = "Testing Group" print("create contact id = \(contact.identifier)") print("create group id = \(group.identifier)") do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(contact, toContainerWithIdentifier: storeContainer) saveRequest.add(group, toContainerWithIdentifier: storeContainer) try contactStore.execute(saveRequest) createdContact = contact createdGroup = group } catch { print("error in store execute = \(error)") } } public func addContactToGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func removeContactFromGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.removeMember(contact, from: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func addGroupAndContact() { let storeContainer = contactStore.defaultContainerIdentifier() let group = CNMutableGroup() group.name = "Test Group" print("create group id = \(group.identifier)") if let contact = createdContact { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(group, toContainerWithIdentifier: storeContainer) saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) createdGroup = group } catch { print("error in store execute = \(error)") } } } public func deleteContactAndGroup() { if let contact = createdContact, let group = createdGroup { do { let mutableGroup = group.mutableCopy() as! CNMutableGroup let mutableContact = contact.mutableCopy() as! CNMutableContact let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.delete(mutableContact) saveRequest.delete(mutableGroup) try contactStore.execute(saveRequest) } catch { print("error in deleting store execute = \(error)") } } } }
3
1
640
Mar ’26
App Clip unavailable
Issue with App Clip Card Showing "App Clip unavailable" for DIGI LIVE App In my DIGI LIVE application, I have an App Clip configured for iOS 17.6+ (the file exceeds the 15 MB limit), and I have made all the necessary preparations for the App Clip to work correctly. However, the App Clip card constantly displays an "App Clip unavailable" error for various users (depending on their system language). The URL associated with the App Clip invocation is: https://ar.digi-live.de The AASA file is located at /.well-known/apple-app-site-association and contains the required fields for the App Clip: { "applinks": { "details": [ { "appIDs": ["N9QR6LF765.de.digilive.app"], "components":[ { "#": "no_universal_links", "exclude": true, "comment": "Matches any URL whose fragment equals no_universal_links and instructs the system not to open it as a universal link" }, { "/": "*", "comment": "Matches any URL like ar.digi-live.de" } ] } ] }, "appclips": { "apps": ["N9QR6LF765.de.digilive.app.Clip"] } } If I use the default App Clip link (https://appclip.apple.com/id?p=de.digilive.app.Clip) to launch it, the "App Clip unavailable" error no longer appears. But if I delete the App Clip from the settings, the error comes back, and it can only be launched again using the default link. It feels like the problem is with the App Clip loading at the moment the App Clip card is triggered — it simply fails to load. Video https://storage.yandexcloud.net/mmrs/files/digilive/IMG_2259.mp4
1
2
169
Oct ’25
CallKit requestTransaction error code 2
Hello, In production, a large number of users experience outgoing call reporting fails with the following error: com.apple.CallKit.error.requesttransaction Code=2 The iOS version doesn't matter, errors are present in v15-26 Details My CXProvider held as a global singleton, so it’s unlikely to be deinited. There is no explicit call to CXProvider.invalidate() in the app. If I manually invalidate the CXProvider, I observe the expected failure when trying to create an outgoing call (com.apple.CallKit.error.requesttransaction error 2). However, If I recreate the CXProvider after the error, outgoing calls are reported correctly. Many users trigger the providerDidReset delegate method (CXProviderDelegate) before this error. According to the documentation, providerDidReset can be called by the system, and we are supposed to end all active calls, but the documentation doesn't suggest recreating the CXProvider. Question Should I recreate CXProvider after providerDidReset and forget about that, or could this error be caused by something else?
5
0
467
Feb ’26
CXCallUpdate not working for outgoing calls
I try to update remoteHandle using CXCallUpdate for outgoing call, but this works only on iOS 15 but not on 17 or 18 (16 didn't test). This problem actual only for outgoing calls, but for incoming calls update works fine. func startOutgoingCall(with callID: UUID, userID: String) { let handle = CXHandle(type: .generic, value: userID) let action = CXStartCallAction(call: callID, handle: handle) callController.requestTransaction(with: action) { [weak self] error in // ... } } func updateOutgoingCall(with callID: UUID, groupID: String) { let update = CXCallUpdate() update.remoteHandle = CXHandle(type: .generic, value: groupID) provider.reportCall(with: callID, updated: update) } I also tried phoneNumber type but it seems initial handle that I set to CXStartCallAction not possible to change (value or even type). I use this handle value to implement recall by tap on call in Recents tab of system address book. But since my calls can transform from p2p to group call, I need to update handle value or find some another way to pass call identification info.
3
1
412
2w
DeviceActivityMonitor extension rejected by App Store Connect validator — NSExtensionPointIdentifier "com.apple.deviceactivity.monitor" invalid (IrisAPI -19241)
Hi everyone, I'm building an iOS app that uses a DeviceActivityMonitor app extension as part of the Screen Time / Family Controls API. Every time I try to upload my IPA to App Store Connect, the validation fails with this error: "Invalid Info.plist value. The value of the NSExtensionPointIdentifier key, com.apple.deviceactivity.monitor, in the Info.plist of 'Alexandria.app/PlugIns/AlexandriaActivityMonitor.appex' is invalid." Error Domain=IrisAPI Code=-19241, iris-code=STATE_ERROR.VALIDATION_ERROR What I have verified (everything looks correct): NSExtensionPointIdentifier = com.apple.deviceactivity.monitor NSExtensionPrincipalClass = AlexandriaActivityMonitor.AlexandriaActivityMonitorExtension (correctly resolved in the compiled binary, verified with plutil -p) The Swift class correctly subclasses DeviceActivityMonitor CFBundleShortVersionString matches the main app Both the main app and extension provisioning profiles explicitly contain com.apple.developer.family-controls = true (verified by inspecting embedded.mobileprovision inside the IPA) The binary code signature itself contains com.apple.developer.family-controls = true (verified with codesign -d --entitlements :-) Family Controls entitlement was requested and approved in the Developer Portal for both App IDs Tested with both Xcode 26.2 (iOS 26 SDK) and Xcode 16.4 (iOS 18 SDK) — same error in both cases The IPA is structurally correct. The error comes purely from Apple's server-side IrisAPI validator and does not correspond to anything I can identify or fix in the code or configuration. Has anyone successfully submitted an app with a DeviceActivityMonitor extension to App Store Connect recently? Is there a backend approval requirement for com.apple.deviceactivity.monitor beyond the standard Family Controls entitlement approval? Could this be a known validator bug for this specific extension type? Any help appreciated.
Replies
4
Boosts
1
Views
193
Activity
3d
iOS 26.2 RC DeviceActivityMonitor.eventDidReachThreshold regression?
Hi there, Starting with iOS 26.2 RC, all my DeviceActivityMonitor.eventDidReachThreshold get activated immediately as I pick up my iPhone for the first time, two nights in a row. Feedback: FB21267341 There's always a chance something odd is happening to my device in particular (although I can't recall making any changes here and the debug logs point to the issue), but just getting this out there ASAP in case others are seeing this (or haven't tried!), and it's critical as this is the RC. DeviceActivityMonitor.eventDidReachThreshold issues also mentioned here: https://aninterestingwebsite.com/forums/thread/793747; but I believe they are different and were potentially fixed in iOS 26.1, but it points to this part of the technology having issues and maybe someone from Apple has been tweaking it.
Replies
23
Boosts
7
Views
2.8k
Activity
4d
CallKit-linked Caller not displayed on iOS 18 CarPlay.
Since I updated to iOS 18, CallKit-linked caller not display on screen of CarPlay. CarPlay display only "{App Name} Caller ID". When iOS version was 17.x, CarPlay displayed caller name of CallKit-linked contact. I think CarPlay should perform the same function as iOS 17. Please review it.
Replies
4
Boosts
2
Views
509
Activity
Nov ’25
swift: Calling "/usr/bin/defaults" returns no data
I'd like to create a small helper app for new students do read/write User default settings. Since it was not possible using the UserDefaults class I decided to use the "/usr/bin/defaults". Unfortuntely it seems not to return anything. Debug output shows "Got data: 0 bytes" Here is a sample code: import SwiftUI func readDefaults(domain : String, key :String) -> String { let cmdPath = "/usr/bin/defaults" //let cmdPath = "/bin/ls" let cmd = Process() let pipe = Pipe() cmd.standardOutput = pipe cmd.standardError = pipe cmd.executableURL = URL(fileURLWithPath: cmdPath, isDirectory: false, relativeTo: nil) cmd.arguments = ["read", domain, key] //cmd.arguments = ["/", "/Library"] print("Shell command: \(cmdPath) \(cmd.arguments?.joined(separator: " ") ?? "")") var d : Data? do { try cmd.run() d = pipe.fileHandleForReading.readDataToEndOfFile() cmd.waitUntilExit() } catch let e as NSError { return "ERROR \(e.code): \(e.localizedDescription)" } catch { return "ERROR: call failed!" } // get pipe output and write is to stdout guard let d else { return "ERROR: Can't get pipe output from command!" } print("Got data: \(d)") if let s = String(data: d, encoding: String.Encoding.utf8) { print("Got result: \(s)") return s } else { return "ERROR: No output from pipe." } } struct ContentView: View { let foo = readDefaults(domain: "com.apple.Finder", key: "ShowHardDrivesOnDesktop") var body: some View { VStack { Text("ShowHardDrivesOnDesktop: \(foo.description)") } .padding() } } #Preview { ContentView() } This code works well e.g. for "ls" when the comments are changed for cmdPath and cmd.arguments. What do I miss in order to get it working with defaults?
Replies
5
Boosts
0
Views
148
Activity
1w
NSURL - is it intended behavior for -URLByAppendingPathComponent: to allow appending multiple path components in one call?
The documentation for NSURL -URLByAppendingPathComponent: states: "Returns a new URL by appending a path component to the original URL." Path component is singular. But this "works" : NSURL *testURL = [applicationsDirectory URLByAppendingPathComponent:@"Evil/../../" isDirectory:YES]; So my questions are: One) Was it always this way? I can't recall if it was like this before the Foundation rewrite and I just never stumbled across? and Two) Is it intended behavior? The API seems to suggest that you append one path component on the url with this method. But I guess you can append as many as you want?
Replies
6
Boosts
0
Views
332
Activity
1w
Scheduled events reach threshold almost immediately on iOS 26.2
Hi, we are developing a screen time management app. The app locks the device after it was used for specified amount of time. After updating to iOS 26.2, we noticed a huge issue: the events started to fire (reach the threshold) in the DeviceActivityMonitorExtension prematurely, almost immediately after scheduling. The only solution we've found is to delete the app and reboot the device, but the effect is not lasting long and this does not always help. Before updating to iOS 26, events also used to sometimes fire prematurely, but rescheduling the event often helped. Now the rescheduling happens almost every second and the events keep reaching the threshold prematurely. Can you suggest any workarounds for this issue?
Replies
4
Boosts
2
Views
393
Activity
1w
How does Numbers.app detect that a document was moved to Recently Deleted, and can third-party apps implement the same behavior?
The Numbers.app reopens the last edited document when the app launches. If the document was moved to another folder in the Files.app while the app was not running, Numbers.app correctly tracks the file and reopens it. However, if the document was deleted in the Files.app and moved to Recently Deleted, Numbers.app does not reopen the document when the app launches. Question : How does Numbers.app detect that a document has been moved to Recently Deleted? Can third-party apps implement the same behavior? What I tested : If a file is moved while the app is not running, resolving a bookmark successfully tracks the moved file. Files that are deleted via the Files.app appear in Recently Deleted, but those files are actually moved to the following directories: iCloud Drive /var/mobile/Library/Mobile Documents/.Trash/ On My iPad /var/mobile/Containers/Shared/AppGroup/{UUID}/File Provider Storage/.Trash/ App sandbox Documents directory ([On My iPad]/[Any App]) /var/mobile/Containers/Data/Application/{UUID}/Documents/.Trash/ When resolving the bookmark after deletion, the bookmark still resolves successfully and returns the new file URL inside the .Trash directory. I tried the following checks on the resolved URL: Checking file existence Checking read/write accessibility Inspecting bookmark resolution results Using APIs related to NSTrashDirectory See https://aninterestingwebsite.com/forums/thread/813329#813329021 All of these behaved the same as when the file was moved to a normal directory. None of these checks allowed me to detect that the file had been deleted. Additional experiment: I suspected that the app might simply check whether the path contains ".Trash", so I performed the following experiment. If a .numbers file is moved to /var/mobile/Containers/Data/Application/{UUID}/Documents/.Trash/ then The file appears in Recently Deleted in Files.app Numbers.app does not reopen the document when the app launches However, if the same file is moved to Documents/Trash Documents/.Trashed Documents/Any Folder/.Trash then The file does not appear in Recently Deleted in Files Numbers does reopen the document when launched This suggests that Numbers.app is not simply checking whether the path contains ".Trash".
Replies
4
Boosts
0
Views
143
Activity
1w
IsEligibleForAgeFeatures behavior in Brazil
From the Feb 24 news, I understand that for all Apple users in Brazil with iOS26.2 and newer, isEligibleForAgeFeatures will eventually return true. Brazil is a "nonregulated region", and developers will need to handle all three situations of ask first/always share/never share. Please correct me if I'm wrong above. A few questions follow on the eligibility check: What's the return value of IsEligibleForAgeFeatures for a Brazilian user who has NOT touched the age range feature at all, thus hasn't picked one of the three options? How can we test these cases? From the updated sandbox doc, there's more information on declined/approved, will those the same behaviors as a future Brazilian user? The doc used to say Texas, now it doesn't say any region. On which date will Apple START to return true for IsEligibleForAgeFeatures for Brazilian users? I cannot find the exact date anywhere. Will ALL of Brazil return true overnight, or is there some ramp up that developers need to be aware of? Thanks a lot for sharing the guidance, and thanks in advance for more guidance to come!
Replies
6
Boosts
1
Views
412
Activity
2w
How to open up an extension point to a third-party app (extension)
According to the documentation, using Scope(restriction: .none) can expose the extension point to third-party app extensions. Below is my implementation, which ultimately results in an error. Code for declaring the extension point: @available(iOS 26.0, *) extension AppExtensionPoint { @Definition static var priceExtension: AppExtensionPoint { Name("priceExtension") UserInterface(false) Scope(restriction: .none) } } Code for locating the extension point: monitor = try await AppExtensionPoint.Monitor(appExtensionPoint: .priceExtension) When executing the code to locate the extension point, the following error occurs: However, in practice, I found that declaring the extension point in this way results in an error when trying to locate it: Error Domain=com.apple.extensionKit.errorDomain Code=19 "Failed to add observer" UserInfo={NSLocalizedDescription=Failed to add observer}
Replies
3
Boosts
0
Views
107
Activity
Oct ’25
Background Assets: Second and subsequent download cancellations fail (iOS 26.0–26.3 RC)
Summary I'm using Background Assets to download Apple-hosted Asset Packs(downloadPolicy = onDemand). The first download cancellation succeeds, but on the second and subsequent downloads, progress.cancel() fails to work and the download completes to the end. Environment iOS 26.0 – 26.3 RC (all produce the same result) Xcode Version 26.2 (17C52) Using Apple-hosted Asset Packs Steps to Reproduce Start downloading an Asset Pack Call progress.cancel() during download → Succeeds Start downloading the same Asset Pack again Call progress.cancel() during download → Fails (download completes to the end) Observed Error Logs After 1st cancellation: A download with the ID "X-XXXXXXXX-XXX" failed: Error Domain=NSURLErrorDomain Code=-999 "cancelled" ↑ This is expected (cancellation succeeded) The fact that version 0 of the asset pack with the ID "X-XXXXXX-XXX" finished being downloaded couldn't be reported: Error Domain=NSCocoaErrorDomain Code=3851 "Property list invalid for format: 200 (property lists cannot contain objects of type 'CFError')" ↑ Problem: Unable to serialize CFError to plist 2nd cancellation attempt: The download with the ID "X-XXXXXX-XXX" couldn't be canceled: Error Domain=BAErrorDomain Code=113 "The requested download operation failed because the download object did not exist." ↑ The download object we're trying to cancel supposedly doesn't exist Implementation Code // Cancel implementation func cancel(tag: String) async { let statusUpdates = AssetPackManager.shared.statusUpdates(forAssetPackWithID: tag) for await statusUpdate in statusUpdates { if case .downloading(_, let progress) = statusUpdate, progress.isCancellable { progress.cancel() } } } Analysis It appears that when the first cancellation occurs, the system internally tries to save the cancellation state to a plist, but fails to serialize the CFError object. This seems to cause an inconsistent internal state, preventing the system from correctly recognizing the download object on subsequent downloads. Questions Is there a workaround? Is there a planned fix for a future iOS version?
Replies
2
Boosts
1
Views
136
Activity
6d
UpdateApplicationContext Not Receiving updates
Hi community. It's my first time trying WatchConnectivity kit. When I attempt to send ApplicationContext from phone, my debug print indicates that updateApplicationContext is working correctly. However, I'm having trouble receiving it form the paired watch simulator as nothing is shown on that end. Here are the code for the Phone Extension:     func sendDataToWatch(data: String) {         state.append(data)         do {             NSLog("sent by phone")             try WCSession.default.updateApplicationContext(["currentstate": state])         }         catch {             print(error)         }     } Here are the code for watch: func session(_ session: WCSession, didReceiveApplicationContext applicationContext: [String: Any]) {         print("Hello")         if let getState = applicationContext["currentstate"] as? [String]{             print("\(getState)")             self.state = getState[0]         }     } Any suggestion would be appreciated!
Replies
13
Boosts
4
Views
5.4k
Activity
1w
ShieldConfiguration: Shield does not update when token is moved from one store to anohter (while in foreground)
Hello, I have noticed that the ShieldConfiguration is only requested when opening a target app, and never when the application token is moved to a different shield while the target app remains in foreground. This causes problems because many times the wrong ShieldConfiguration is displayed (recycled) instead of requesting a new ShieldConfiguration. This bug has been around since the introduction of the Screen Time API in 2020 and is has not been addressed. Bug reports: FB14237883 FB17902392 Please fix asap!! Not acceptable to have bugs not being addressed for more than 5 years. Most concerning: This is still reproducing on iOS 26 beta 7!! Thanks a lot for your help.
Replies
0
Boosts
2
Views
351
Activity
Aug ’25
Interactive Live Activity Bug in iOS 18 - perform not called
In iOS 18 (beta 1-4) when you set openAppWhenRun = false in your AppIntent of your live activity the perform function never gets called. In iOS 16 and 17 my live activities work. I have downloaded other apps and in their live activities any button tab which doesn´t open the app is also doing nothing in iOS 18. Has anyone got this working? Any comments from an Apple engineer on this?
Replies
4
Boosts
2
Views
1.5k
Activity
Apr ’25
Question about including all project classes in ofClasses parameter when using NSKeyedUnarchiver.unarchivedObject(ofClasses:from:)
Hello, I have a question about data deserialization using NSKeyedUnarchiver in iOS SDK development. Current Situation: Previously, we were using the NSKeyedUnarchiver.unarchiveObject(with: Data) function We have changed to using the NSKeyedUnarchiver.unarchivedObject(ofClasses:from:) method to deserialize complex objects stored in UserDefaults We need to include all types in the ofClasses parameter, including Swift primitive types as well as various custom classes and structs within the project Questions: Implementation Approach: Is it correct pattern to include all classes defined in the project in the ofClasses array? Is this approach recommended? Runtime Stability: When using this approach, is there a possibility of runtime crashes? Are there any performance issues? Alternative Methods: If the current approach is not the correct pattern, what alternatives should we consider? Current Code Structure: All model classes conform to the NSSecureCoding protocol We use the requiringSecureCoding: true parameter We use a whitelist approach, explicitly listing only allowed classes I would like to know if this structure is appropriate, or if we should consider a different approach. Thank you.
Replies
4
Boosts
0
Views
252
Activity
Oct ’25
AlarmKit Not Playing Custom Sound or Named System Sounds - iOS 26 beta 4 (23A5297i)
I'm using the new AlarmKit framework to schedule and trigger alarms in my Swift app in iOS 26 beta 4 (23A5297i). I'm trying to customize the alarm sound using a sound file embedded in the app bundle or by referencing known system tones. Problem: No matter what I pass to .named("sound-2"), whether a file bundle url, .named("sound-2.caf"), tried .mp3, .caf & .aiff, or a known iOS system sound like .named("Radar") ("Chimes", etc.), the alarm always plays the default system alert tone. There's no error or warning, but the custom or specified sound is silently ignored. sound: .named("sound-2") Question: What is the correct method or approach to play custom sound / music when Alarm Triggers? What .named("...") expects file name, file Path URL or System sound name? Is there any specific audio file length accepted or specific format? Challenge: The alarm functionality feels incomplete without support for custom sounds. A single default alert tone is often not sufficient to wake up users effectively. Hope it will be fixed in the next iOS updates.
Replies
4
Boosts
2
Views
189
Activity
Aug ’25
Any Brazil developer to test out the `regulatoryfeature` API in prod?
We now know the IsEligibleForAgeFeatures API is NOT returning True in Brazil at least 2 days past compliance date, and we don't know if that's the right API, or how it behaves. Folks here: Is there anyone here from Brazil who has tested out this 26.4 API? Has anyone tested out the regulatory feature API? Does it return something like declaredAgeRangeRequired? I don't know how to test it in Brazil without sandbox/physically in Brazil. Much appreciated!!
Replies
0
Boosts
2
Views
75
Activity
2w
Contacts: remove member from group not working on macOS
Hi, In my app, I have an option to remove a contact from a contact group (using the Contacts framework), and it's been working fine till recently users of the macOS version reported that it's not working. I have been using the CNSaveRequest removeMember(contact, from: group) API. The same API works fine on iOS. I'm not sure when it started but it seems to be affecting macOS14.6 as well as 15.1. I was able to reproduce it in a small test project as well, and have the same experience (the API works on iOS but not on macOS), so it definitely seems like a problem with the framework. Can someone confirm this, and/or suggest a workaround? Here's the code I run to test it out ...a simple SwiftUI view that has 4 buttons: Create contact and group Add contact to group Remove contact from group (optional) cleanup by deleting contact and group It's the 3rd step that seems to fail on macOS, but works fine on iOS. Here's the code to test it out: struct ContentView: View { let contactsModel = ContactsStoreModel() var body: some View { VStack (alignment: .center, spacing: 15){ Button ("1. Add Contact And Group") { print("add contact button pressed") contactsModel.addTestContact() if let _ = contactsModel.createdContact { print("created contact success") } } Button ("2. Add Contact To Group") { print("add to group button pressed") contactsModel.addContactToGroup() } Button ("3. Remove Contact From Group") { print("remove from group button pressed") contactsModel.removeContactFromGroup() } Button ("4. Delete Contact and Group") { print("remove from group button pressed") contactsModel.deleteContactAndGroup() } } .padding() } } #Preview { ContentView() } @available(iOS 13.0, *) @objc final class ContactsStoreModel: NSObject, ObservableObject { let contactStore = CNContactStore() var createdContact : CNContact? var createdGroup : CNGroup? public func addTestContact() { let storeContainer = contactStore.defaultContainerIdentifier() let contact = CNMutableContact() contact.givenName = "Testing" contact.familyName = "User" contact.phoneNumbers = [CNLabeledValue(label: "Cell", value: CNPhoneNumber(stringValue: "1234567890"))] let group = CNMutableGroup() group.name = "Testing Group" print("create contact id = \(contact.identifier)") print("create group id = \(group.identifier)") do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(contact, toContainerWithIdentifier: storeContainer) saveRequest.add(group, toContainerWithIdentifier: storeContainer) try contactStore.execute(saveRequest) createdContact = contact createdGroup = group } catch { print("error in store execute = \(error)") } } public func addContactToGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func removeContactFromGroup() { if let contact = createdContact, let group = createdGroup { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.removeMember(contact, from: group) try contactStore.execute(saveRequest) } catch { print("error in store execute = \(error)") } } } public func addGroupAndContact() { let storeContainer = contactStore.defaultContainerIdentifier() let group = CNMutableGroup() group.name = "Test Group" print("create group id = \(group.identifier)") if let contact = createdContact { do { let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.add(group, toContainerWithIdentifier: storeContainer) saveRequest.addMember(contact, to: group) try contactStore.execute(saveRequest) createdGroup = group } catch { print("error in store execute = \(error)") } } } public func deleteContactAndGroup() { if let contact = createdContact, let group = createdGroup { do { let mutableGroup = group.mutableCopy() as! CNMutableGroup let mutableContact = contact.mutableCopy() as! CNMutableContact let saveRequest = CNSaveRequest() saveRequest.transactionAuthor = "TestApp" saveRequest.delete(mutableContact) saveRequest.delete(mutableGroup) try contactStore.execute(saveRequest) } catch { print("error in deleting store execute = \(error)") } } } }
Replies
3
Boosts
1
Views
640
Activity
Mar ’26
App Clip unavailable
Issue with App Clip Card Showing "App Clip unavailable" for DIGI LIVE App In my DIGI LIVE application, I have an App Clip configured for iOS 17.6+ (the file exceeds the 15 MB limit), and I have made all the necessary preparations for the App Clip to work correctly. However, the App Clip card constantly displays an "App Clip unavailable" error for various users (depending on their system language). The URL associated with the App Clip invocation is: https://ar.digi-live.de The AASA file is located at /.well-known/apple-app-site-association and contains the required fields for the App Clip: { "applinks": { "details": [ { "appIDs": ["N9QR6LF765.de.digilive.app"], "components":[ { "#": "no_universal_links", "exclude": true, "comment": "Matches any URL whose fragment equals no_universal_links and instructs the system not to open it as a universal link" }, { "/": "*", "comment": "Matches any URL like ar.digi-live.de" } ] } ] }, "appclips": { "apps": ["N9QR6LF765.de.digilive.app.Clip"] } } If I use the default App Clip link (https://appclip.apple.com/id?p=de.digilive.app.Clip) to launch it, the "App Clip unavailable" error no longer appears. But if I delete the App Clip from the settings, the error comes back, and it can only be launched again using the default link. It feels like the problem is with the App Clip loading at the moment the App Clip card is triggered — it simply fails to load. Video https://storage.yandexcloud.net/mmrs/files/digilive/IMG_2259.mp4
Replies
1
Boosts
2
Views
169
Activity
Oct ’25
CallKit requestTransaction error code 2
Hello, In production, a large number of users experience outgoing call reporting fails with the following error: com.apple.CallKit.error.requesttransaction Code=2 The iOS version doesn't matter, errors are present in v15-26 Details My CXProvider held as a global singleton, so it’s unlikely to be deinited. There is no explicit call to CXProvider.invalidate() in the app. If I manually invalidate the CXProvider, I observe the expected failure when trying to create an outgoing call (com.apple.CallKit.error.requesttransaction error 2). However, If I recreate the CXProvider after the error, outgoing calls are reported correctly. Many users trigger the providerDidReset delegate method (CXProviderDelegate) before this error. According to the documentation, providerDidReset can be called by the system, and we are supposed to end all active calls, but the documentation doesn't suggest recreating the CXProvider. Question Should I recreate CXProvider after providerDidReset and forget about that, or could this error be caused by something else?
Replies
5
Boosts
0
Views
467
Activity
Feb ’26
CXCallUpdate not working for outgoing calls
I try to update remoteHandle using CXCallUpdate for outgoing call, but this works only on iOS 15 but not on 17 or 18 (16 didn't test). This problem actual only for outgoing calls, but for incoming calls update works fine. func startOutgoingCall(with callID: UUID, userID: String) { let handle = CXHandle(type: .generic, value: userID) let action = CXStartCallAction(call: callID, handle: handle) callController.requestTransaction(with: action) { [weak self] error in // ... } } func updateOutgoingCall(with callID: UUID, groupID: String) { let update = CXCallUpdate() update.remoteHandle = CXHandle(type: .generic, value: groupID) provider.reportCall(with: callID, updated: update) } I also tried phoneNumber type but it seems initial handle that I set to CXStartCallAction not possible to change (value or even type). I use this handle value to implement recall by tap on call in Recents tab of system address book. But since my calls can transform from p2p to group call, I need to update handle value or find some another way to pass call identification info.
Replies
3
Boosts
1
Views
412
Activity
2w