Notice: While JavaScript is not essential for this website, your interaction with the content will be limited. Please turn JavaScript on for the full experience.

IDLE and tkinter with Tcl/Tk on macOS

Important

If you are using macOS 12 Monterey or later, you may see problems with file open and save dialogs when using IDLE or other tkinter-based applications. The most recent versions of python.org installers (for 3.10.0 and 3.9.8) have patched versions of Tk to avoid these problems. They should be fixed in an upcoming Tk 8.6.12 release.

If you are using a Python from any current python.org Python installer for macOS (3.10.0+ or 3.9.0+), no further action is needed to use IDLE or tkinter. A built-in version of Tcl/Tk 8.6 will be used.

If you are using macOS 10.6 or later, the Apple-supplied Tcl/Tk 8.5 has serious bugs that can cause application crashes. If you wish to use IDLE or Tkinter, do not use the Apple-supplied Pythons. Instead, install and use a newer version of Python from python.org or a third-party distributor that supplies or links with a newer version of Tcl/Tk.

Python's integrated development environment, IDLE, and the tkinter GUI toolkit it uses, depend on the Tk GUI toolkit which is not part of Python itself. For best results, it is important that the proper release of Tcl/Tk is installed on your machine. For recent Python installers for macOS downloadable from this website, here is a summary of current recommendations followed by more detailed information.

Python Release Installer Variant macOS Release Recommended Tcl/Tk Alternate Tcl/Tk Not Recommended
3.10.0, 3.9.8 universal2 10.9+ built-in 8.6.11    
3.9.8 Intel-only 10.9+ built-in 8.6.8    

Tk On macOS

There are currently three major variants of Tk in common use on macOS:

Aqua Cocoa Tk
A newer native implementation available as a universal 64-bit and 32-bit binary. This variant is the standard native macOS variant in Tk 8.6 and as of Tk 8.5.13. Aqua Cocoa support was backported to Tk 8.5 (prior to 8.5.13) and released by Apple starting with macOS 10.6 and by ActiveState starting with their 8.5.9.1 release.
Aqua Carbon Tk
Because it is implemented with older macOS Carbon interfaces, it is only available as a 32-bit binary (usually for Intel and PowerPC processors). Aqua Carbon Tk 8.4 is included with macOS releases 10.4 through 10.14 and is also available from ActiveState. Aqua Carbon variants of Tk 8.5 had been available as an ActiveState Community Download prior to ActiveTcl 8.5.9. As of 8.5.13, the Tk project no longer supports Carbon builds of Tk 8.5. 32-bit-only Python installers downloadable from this website for older Python releases were linked with Aqua Carbon Tk 8.4.
X11 Tk
The traditional platform-independent UNIX Tk implementation which requires an X11 server, such as the Apple X11.app available as an optional component in older macOS releases or from third-party distributors. 64-bit and 32-bit binaries can be built. While the Python installers downloadable from this website do not support X11 Tk, other distributors of Python for macOS may do so.

Tcl/Tk Releases

built-in 8.6.11

As of Python 3.9.1, all current universal2 Python installers for macOS downloadable from python.org supply their own private copies of Tcl/Tk 8.6.11. They do not look for or use any third-party or system copies of Tcl/Tk. This is an Aqua Cocoa Tk.

built-in 8.6.8

As of Python 3.7.0, 3.6.8, and 2.7.16, all current legacy 64-bit Intel-only Python installers for macOS downloadable from python.org supply their own private copies of Tcl/Tk 8.6.8. They do not look for or use any third-party or system copies of Tcl/Tk. This is an Aqua Cocoa Tk.

ActiveTcl 8.5.18.0

ActiveState provides binary distributions of Tcl/Tk which are upward compatible with and generally more up-to-date than those provided by Apple in macOS releases. This version of Tcl/Tk includes fixes for some critical problems that you may encounter using tkinter or IDLE (see Apple 8.5.9 below). You can download an installer for this release from the ActiveState web site. Note that ActiveState Community Edition binaries are not open source and are covered by an ActiveState license. You should read the license before downloading to verify that your usage complies with its terms of use. As of Python 3.7.0, 3.6.8, and 2.7.16, no current Python installers for macOS downloadable from python.org make use of this or any other external version of Tcl/Tk.

This is an Aqua Cocoa Tk.

Apple 8.5.9

This release is included in macOS 10.7 through at least macOS 10.14. As of this writing, there are at least two known issues with Tk 8.5.9 that are present in Apple 8.5.9 Tk but fixed in more recent upstream 8.5 releases. The more serious problem is an immediate crash in Tk when entering a composition character, like Option-u on a US keyboard. (This problem is documented as Tk bug 2907388.) There is also the more general problem of input manager support for composite characters (Tk bug 3205153) which has also been fixed in more recent Tcl/Tk 8.5 releases. You can avoid these problems by using a current python.org installer or by using a third-party distribution of Python that does not use Apple 8.5.9 Tk. This is an Aqua Cocoa Tk.

Apple 8.5.7

This release is included in macOS 10.6. IDLE is known to hang or crash when used with the Apple 8.5.7 included in all versions of macOS 10.6.x. Because of this, we strongly recommend that you do not attempt to use Tkinter or IDLE with the Apple-supplied Python 2.6.1 in 10.6. Instead, install a newer version of Python that supports a newer version of Tk. This is an Aqua Cocoa Tk.

How Python Chooses Which Tk Library To Use

Note

While Tcl and Tk are separate frameworks and libraries, they are closely related and are normally installed or updated simultaneously. You should not attempt to mix-and-match Tcl and Tk versions. References to a specific version of Tk assume the corresponding version of Tcl is installed as well.

The Python for macOS installers downloaded from this website dynamically link at runtime to Tcl/Tk macOS frameworks. The Tcl/Tk major version is determined when the installer is created and cannot be overridden. All current python.org installers link to their own built-in Tcl/Tk 8.6 frameworks and do not use external Tcl/Tk frameworks so the rest of this section only applies to non-current releases and, as such, no longer supported.

The Python 64-bit/32-bit macOS installers for Python 3.6.x and and 2.7.x dynamically link to Tcl/Tk 8.5 frameworks. The dynamically linking occurs when tkinter (Python 3) or Tkinter (Python 2) is first imported (specifically, the internal _tkinter C extension module). By default, the macOS dynamic linker looks first in /Library/Frameworks for Tcl and Tk frameworks with the proper major version. This is the standard location for third-party or built from source frameworks, including the ActiveTcl releases. If frameworks of the proper major version are not found there, the dynamic linker looks for the same version in /System/Library/Frameworks, the location for Apple-supplied frameworks shipped with macOS. (Note, you should normally not modify or delete files in /System/Library.)

As is common on macOS, the installed Pythons and the Tcl and Tk frameworks are built to run on multiple CPU architectures (universal binaries) and across multiple macOS levels (minimum deployment target). For Python to be able to dynamically link with a particular Tcl and Tk version, the available architectures in the Tcl/Tk frameworks must include the architecture that Python is running in and their minimum deployment target should be no greater than that of Python.

Revision history

  • 2021-11-05 - updated for 3.9.8 and macOS 12 Monterey
  • 2021-10-04 - updated for 3.10.0 and 3.9.7
  • 2020-10-05 - updated for 3.9.0 and 3.8.6, remove 2.7
  • 2020-08-17 - updated for 3.7.9
  • 2020-07-20 - updated for 3.8.5
  • 2020-06-27 - updated for 3.7.8
  • 2020-05-14 - updated for 3.8.3
  • 2020-03-10 - updated for 3.8.2 and 3.7.7
  • 2019-12-19 - updated for 3.8.1, 3.7.6, and 2.7.17
  • 2019-10-15 - updated for 3.8.0, 3.7.5, and macOS 10.15
  • 2019-07-08 - updated for 3.7.4; 3.6.x is now security-fix-only
  • 2019-03-25 - updated for 3.7.3
  • 2019-03-03 - updated for 2.7.16
  • 2018-12-24 - updated for 3.7.2 and 3.6.8
  • 2018-10-20 - updated for 3.7.1, 3.6.7, and macOS 10.14
  • 2018-06-27 - updated for 3.7.0 and 3.6.6
  • 2018-05-30 - updated for 3.7.0b5
  • 2018-05-02 - updated for 3.7.0b4 and 2.7.15; removed 32-bit-only refs
  • 2018-03-29 - updated for 3.7.0b3 and 3.6.5
  • 2018-02-28 - updated for 3.7.0b2
  • 2018-01-31 - updated for 3.7.0b1 and 3.6.4
  • 2017-10-03 - updated for 3.6.3 and macOS 10.13
  • 2017-09-16 - updated for 2.7.14; removed 3.5.x
  • 2017-07-17 - updated for 3.6.2
  • 2017-03-21 - updated for 3.6.1 and (belatedly) 3.5.3
  • 2016-12-23 - updated for 3.6.0
  • 2016-12-17 - updated for 2.7.13
  • 2016-09-23 - updated for macOS 10.12
  • 2016-07-31 - updated for 3.5.2 and 2.7.12; removed 3.4.x
  • 2015-12-20 - updated for 3.4.4
  • 2015-12-06 - updated for 3.5.1, 2.7.11, and macOS 10.11
  • 2015-09-13 - updated for 3.5.0
  • 2015-05-23 - updated for 2.7.10 and ActiveTcl 8.5.18.0
  • 2015-02-23 - updated for 3.4.3
  • 2014-12-10 - updated for 2.7.9 and ActiveTcl 8.5.17.0
  • 2014-10-16 - updated for macOS 10.10
  • 2014-10-06 - updated for 3.4.2 and ActiveTcl 8.5.16.0
  • 2014-09-22 - updated for 3.4.2rc1
  • 2014-07-01 - updated for 2.7.8
  • 2014-06-01 - updated for 2.7.7; removed 2.7.6 and 3.3.5
  • 2014-05-18 - updated for 3.4.1 and 2.7.7rc1
  • 2014-03-16 - updated for 3.4.0 and 3.3.5
  • 2014-02-10 - updated for 3.3.4 and 3.4.0rc1
  • 2014-01-05 - updated for 3.4.0b2
  • 2013-11-24 - clarify that the ActiveState website still refers to 8.5.15.0
  • 2013-11-24 - removed built-in for 3.4.0b1, removed 3.3.2 and 2.7.5
  • 2013-11-10 - ActiveTcl 8.5.15.1; removed built-in for 3.3.3rc2 and 2.7.6.
  • 2013-10-27 - updated for 3.3.3rc1 and 2.7.6rc1 and their built-in 8.5.15.
  • 2013-10-24 - updated for macOS 10.9 and ActiveTcl 8.5.15, removed 3.2.5.
  • 2013-10-20 - updated for 3.4.0a4 and its built-in 8.5.15.
  • 2013-09-29 - updated for 3.4.0a3
  • 2013-09-09 - updated for 3.4.0a2 and its built-in 8.5.14.
  • 2013-08-03 - updated for 3.4.0a1 and ActiveTcl 8.4.20
  • 2013-05-18 - updated for ActiveTcl 8.5.14
  • 2013-05-15 - updated for 3.3.2, 2.7.5, and 3.2.5
  • 2013-04-06 - updated for 3.3.1, 2.7.4, and 3.2.4
  • 2012-12-26 - updated for ActiveTcl 8.5.13 and Issue 15853 patch installer
  • 2012-09-29 - updated for 3.3.0 final and reverted to ActiveTcl 8.5.11.1
  • 2012-08-02 - updated for ActiveTcl 8.5.12
  • 2012-07-28 - updated for macOS 10.8
  • 2012-04-11 - updated for 3.2.3 final and 2.7.3 final
  • 2012-03-18 - updated for 3.2.3rc2 and 2.7.3rc2
  • 2012-03-04 - updated for ActiveTcl 8.5.11.1, 3.2.3rc1, 2.7.3rc1, removed 3.1.4
  • 2011-11-12 - updated for ActiveTcl 8.5.11
  • 2011-09-04 - updated for 3.2.2 final
  • 2011-07-21 - updated for macOS 10.7 and ActiveTcl 8.5.10.1
  • 2011-07-09 - updated for 3.2.1 final and ActiveTcl 8.5.10
  • 2011-06-12 - updated for 2.7.2 final and 3.1.4 final
  • 2011-05-30 - updated for 3.2.1rc, 2.7.2rc, and 3.1.4rc
  • 2011-03-08 - add warnings and include details on how Python links with Tcl/Tk releases
  • 2011-02-20 - updated for 3.2 final
  • 2011-01-31 draft 1 - preliminary info for 3.2rc2
  • 2011-01-14 draft 0