Discuss Spatial Computing on Apple Platforms.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Sticky Horizontal AnchorEntity
Hi, I'm trying to use AnchorEntity for horizontal surfaces. It works when the entity is being created, but I'm looking for a way to snap this entity to the nearest surface, after translating it, for example with a DragGesture. What would be the best way to achieve this? Using raycast, creating a new anchor, trackingMode to continuous etc. Do I need to use ARKitSession as I want continuous tracking?
1
0
278
Feb ’26
iOS needs to allow for background bluetooth scanning. I can't fully build my app.
iOS currently restricts background Bluetooth advertising and scanning in order to preserve battery life and protect user privacy. While these restrictions serve important purposes, they also limit legitimate use cases where users have explicitly opted in to proximity-based experiences. The core challenge is that modern social applications need a way to detect when users are physically present at the same location or event without requiring every participant to keep their app in the foreground. Under the current system, background BLE advertising is heavily throttled and can only transmit a limited payload, background scanning intervals are sparse and unpredictable, peer-to-peer proximity detection cannot be maintained reliably when apps are in the background, and Background App Refresh is non-deterministic, making any kind of time-based proximity validation impossible. A proposed enhancement would be to introduce an “Enhanced Proximity Permission.” This would allow developers to enable reliable background BLE advertising and scanning for declared time windows, such as a maximum of eight hours. It would also allow devices running the same app to detect each other’s proximity using ephemeral, rotating identifiers that preserve privacy, with clear user consent and prominent indicators whenever the feature is active. Unlocking this capability would open up new categories of applications. Live events could offer automatic attendance tracking at concerts, conferences, or sports venues. Retail environments could support opt-in foot traffic analysis and dwell-time insights. Social apps could allow users to find friends at festivals, campuses, or other large venues. Safety applications could extend to crowd density monitoring and contact tracing beyond COVID-era needs. Gaming could offer real-world multiplayer experiences based on physical proximity, and transportation providers could verify rideshare pickups or measure public transit flows automatically. Privacy safeguards would remain central. Permissions would be time-boxed and expire after an event or session. A mandatory visual indicator would be displayed whenever proximity tracking is active. A user-facing dashboard would show all apps granted enhanced proximity access. Permissions would automatically be revoked after a period of non-use, and only ephemeral tokens not permanent identifiers would be broadcast. The industry impact would be significant. With this enhancement, iOS could power the next generation of location-aware social platforms while maintaining Apple’s leadership in privacy through explicit user control and transparency. Current alternatives, such as requiring users to keep apps in the foreground or deploying dedicated hardware beacons, produce poor user experiences and constrain innovation in spatial computing and social applications. Can anyone from Apple consider this change? Having to buy iBeacons is brutal and means slower adoption. Please reconsider this for users who opt in.
1
0
1.2k
Sep ’25
How to Renew visionOS Enterprise API Entitlements?
How can I renew visionOS Enterprise API? I've spent so much time contacting Apple Developer Support. They said they don't know the renewal process either and are "checking with the internal operations team" - but it's been 2 months with no updates. The official documentation (https://aninterestingwebsite.com/documentation/visionOS/building-spatial-experiences-for-business-apps-with-enterprise-apis#Request-the-entitlements) says: "The license file comes with an expiration date, so you need to renew it before then to ensure your entitlements continue to function." But it doesn't explain HOW to renew. When I asked Apple Support about this, they told me: "After Apple approves your app for one or more entitlements, you receive a license file, along with additional instructions." But I never received any instructions when I was first approved, and I still don't know how to renew. There's also no direct way to contact the Enterprise API team. Now my visionOS Enterprise API license has been expired for 2 months. I submitted a renewal request, but I still haven't heard anything back. Is it normal to take more than 2 months for approval? Any advice or shared experiences would be really helpful. Thanks!
1
0
508
Jan ’26
visionOS Widget Bug
When I was developing the visionOS 26beta Widget, I found that it could not work normally when the real vision OS was running, and an error would appear. Please adopt container background api It is worth mentioning that this problem does not occur on the visionOS virtual machine. Does anyone know what the reason and solution are, or whether this is a visionOS error that needs Feedback? Thank you!
1
0
470
Sep ’25
CustomMaterial disable unlit tone mapping
Hi, since iOS 18 UnlitMaterial and ShaderGraphMaterial have the option to disable tone mapping, e.g via https://aninterestingwebsite.com/documentation/realitykit/unlitmaterial/init(applypostprocesstonemap:) Is it possible to do the same for CustomMaterial? I tried initializing a CustomMaterial based on an UnlitMaterial where tone mapping is disabled, like so: let unlitMat = UnlitMaterial(applyPostProcessToneMap: false) let customMaterial = try CustomMaterial( from: unlitMat, surfaceShader: surfaceShader, geometryModifier: geometryModifier ) but that does not seem to work. The colors of my texture still look altered in comparison to a plain UnlitMaterial or a ShaderGraphMaterial where its disabled. Any hints? Thank you!
1
0
145
Jun ’25
Need to rotate child of a 3D mesh
I am creating a vision pro app with a 3D model, it has a mesh hierarchy of head, hands, feet etc. I want the character to look towards the camera, but am not able to access head of character through sceneKit nor reality kit. when I try to print names of the child meshes, it only prints till the character, it does iterate through all the body parts. Can anyone help?
1
0
228
Sep ’25
Draw An Outline Around a Model Entity
Hi, Is there a resource or sample code about how to draw an outline around a mesh in RealityKit? Typically, this is useful for visualizing a selection, like in Reality Composer Pro. How to achieve such effect? A shader material? A post-process effect in ARView or RealityRenderer? Methods such as duplicating the entity mesh, scaling it, and using material.faceCulling = .front did not look good in my experiments. Thank you.
1
0
542
Feb ’26
The folding and unfolding effect of the NBA sand table
Seeing this magical sand table, the unfolding and folding effects are similar to spreading out cards, which is very interesting. But I don't know how to achieve it. I want to see if there are any ways to achieve this effect and give some ideas. May I ask if this effect can be achieved under the existing API
1
0
99
May ’25
RealityKit_DirectionalLight_Question
My application calculates three distinct Meesus Double [x, y, z] Radian values to light a sphere in RealityKit with DirectionalLight. It is my understanding that I must use (simd_quatf) for each radian value to properly light the sphere in the view. The code correctly [orientates] the sphere with the combined (simd_quatf) DirectionalLight in the view, but the illumination (Z-axis) fails to properly illuminate the sphere with the expected result, compared to associated Meesus web page images. For the moment, I do not know how to correct the (Z-axis). Curious for a suggestion ... :] // Location values. let theLatitude: Double = 51.13107260 let theLongitude: Double = -114.01127910 let currentDate: Date = Date() struct TheCalculatedMoonPhaseTest_ContentView: View { var body: some View { VStack { if #available(macOS 15.0, *) { RealityView { content in let moonSphere_Entity = Entity.createSphere(radius: 0.90, color: .black) moonSphere.Entity.name = "MoonSphere" moonSphere.Entity.position = SIMD3<Float>(x: 0, y: 0, z: 0) content.add(moonSphere.Entity) let sunLight_Entity = createDirectionalLight(latitude: theLatitude, longitude: theLongitude, date: currentDate) content.add(sunLight_Entity) } // End of [RealityView] } else { // Earlier version required. } // End of [if #available(macOS 15.0, *)] } // End of [VStack] .background(Color.black) } // End of [var body: some View] // MARK: - 🟠🟠🟠🟠 [SET THE BACKGROUND COLOUR] 🟠🟠🟠🟠 var backgroundColor: Color = Color.init(.black) // MARK: - 🟠🟠🟠🟠 [CREATE THE DIRECTIONAL LIGHT FOR THE SPHERE] 🟠🟠🟠🟠 func createDirectionalLight(latitude: Double, longitude: Double, date: Date) -> Entity { let directionalLight = DirectionalLight() directionalLight.light.color = .white directionalLight.light.intensity = 1000000 directionalLight.shadow = DirectionalLightComponent.Shadow() directionalLight.shadow?.maximumDistance = 5 directionalLight.shadow?.depthBias = 1 // MARK: 🟠🟠🟠🟠 Retrieve the [MEESUS MOON AGE VALUES] from the [CONSTANT FOLDER] 🟠🟠🟠🟠 let theMeesusMoonAge_LunarAgeDaysValue = 25.90567592898601 if theMeesusMoonAge_LunarAgeDaysValue >= 23.10 && theMeesusMoonAge_LunarAgeDaysValue < (29.530588853 - 1.00) { let someCalculatedX_WestEastRadian: Float = Float(1.00) // Identify the sphere’s DirectionalLight Tilt Angle (Y) radian value :: // Note :: The following Tilt Angle is corrected to [Zenith] with the [MeesusCalculatedTilt_Angle] minus the [MeesusCalculatedPar_Angle]. let someCalculatedY_TiltAngleRadian: Float = Float(1.3396086) // Identify the sphere’s DirectionalLight Illumination (Z) radian Value :: // Note :: The Meesus calculated illumination fraction is converted to degrees, then converted to a radian value. let someCalculatedZ_IlluminationAngleRadian: Float = Float(0.45176168630244457) // <=== 14.3800% Illumination. // Define rotation angles in radians for X, Y, and Z axes. let x_Radians = someCalculatedX_WestEastRadian let y_Radians = someCalculatedY_TiltAngleRadian let z_Radians = someCalculatedZ_IlluminationAngleRadian // Identify and separate the quaternion [simd_quatf] for each Radian. let q_X = simd_quatf(angle: x_Radians, axis: SIMD3<Float>(1, 0, 0)) let q_Y = simd_quatf(angle: y_Radians, axis: SIMD3<Float>(0, 1, 0)) let q_Z = simd_quatf(angle: z_Radians, axis: SIMD3<Float>(0, 0, 1)) // Apply and combine the rotations, where order matters. let combinedRotation = q_Z * q_Y * q_X // Identify the [Combined Rotation]. // The [MyMoonMeesus] :: [WANING CRESCENT] calculated [combinedRotation] :: simd_quatf(real: 0.73715997, imag: SIMD3<Float>(0.24427173, 0.61516714, -0.13599981)) ° Radians // Normalize the [combinedRotation]. let theNormalizesRotation = simd_normalize(combinedRotation) // Identify the [Normalized Combined Rotation]. // The [MyMoonMeesus] :: [WANING CRESCENT] calculated [normalizedRotation] :: simd_quatf(real: 0.73715997, imag: SIMD3<Float>(0.24427173, 0.61516714, -0.13599981)) ° Radians // Assume the [theNormalizesRotation] appears reversed. let theCorrectedRotation = theNormalizesRotation.inverse // Identify the [Reversed Combined Rotation]. // The [MyMoonMeesus] :: [WANING CRESCENT] calculated [correctedRotation] :: simd_quatf(real: 0.73715997, imag: SIMD3<Float>(-0.24427173, -0.61516714, 0.13599981)) ° Radians // Apply the [Corrected Rotation] to the entity. directionalLight.transform.rotation *= theCorrectedRotation // Add the [directionalLight] to the scene :: let anchor = AnchorEntity() anchor.addChild(directionalLight) } // End of [if theMeesusMoonAge_LunarAgeDaysValue >= 23.10 && theMeesusMoonAge_LunarAgeDaysValue < (29.530588853 - 1.00)] return directionalLight } // End of [func createDirectionalLight(latitude: Double, longitude: Double, date: Date) -> Entity] } // End of [struct TheCalculatedMoonPhaseTest_ContentView: View] // MARK: 🟠🟠🟠🟠 [ENTITY HELPER EXTENSION] 🟠🟠🟠🟠 extension Entity { static func createSphere(radius: Float, color: NSColor) -> Entity { let mesh = MeshResource.generateSphere(radius: radius) var material = PhysicallyBasedMaterial() material.baseColor = .init(tint: color) let modelComponent = ModelComponent(mesh: mesh, materials: [material]) let entity = Entity() entity.components.set(modelComponent) entity.components.set(Transform()) return entity } // End of [static func createSphere(radius: Float, color: NSColor) -> Entity] } // End of [extension Entity] // Application Image :: Calgary // Website Image :: timeanddate // mooncalc.org
1
0
176
Feb ’26
Using AVAsynchronousKeyValueLoading.load() on an AVAssetTrack gives an error
I'm seeing this error while attempting to compile my VisionOS app under Xcode 26. My existing code looks like: let (naturalSize, formatDescriptions, mediaCharacteristics) = try? await videoTrack.load(.naturalSize, .formatDescriptions, .mediaCharacteristics) This is now giving a compiler error: Type of expression is ambiguous without a type annotation I don't see that anything that was changed or deprecated in the latest version. Also loading the properties individually seems to work fine i.e.: let naturalSize = try? await videoTrack.load(.naturalSize) let formatDescriptions = try? await videoTrack.load(.formatDescriptions) let mediaCharacteristics = try? await videoTrack.load(.mediaCharacteristics)
1
0
122
Jun ’25
ImmersiveSpace orphaned when WindowGroup closes
Environment visionOS 26.1, Xcode 26.1.1 Problem When a WindowGroup opens an ImmersiveSpace and the user closes the window via X button, the async Task in .onDisappear gets cancelled before dismissImmersiveSpace() completes, leaving the ImmersiveSpace active with no way to exit. Steps WindowGroup opens ImmersiveSpace in .onAppear User clicks X to close window .onDisappear fires but async cleanup cancelled ImmersiveSpace remains active, user trapped Expected ImmersiveSpace dismissed when window closes Actual ImmersiveSpace remains active Code .onAppear { Task { await openImmersiveSpace(id: "VideoCallMainCamera") } } .onDisappear { Task { await dismissImmersiveSpace() // Gets cancelled } } What I've Tried Task in .onDisappear ❌ scenePhase monitoring ❌ High priority Task ❌ .restorationBehavior(.disabled) + .defaultLaunchBehavior(.suppressed) ✅ (prevents restoration but doesn't fix immediate cleanup) Question What's the recommended pattern for ensuring ImmersiveSpace cleanup when WindowGroup closes? Is there a way to block window closure until async cleanup completes, or should ImmersiveSpaces automatically dismiss with their parent window?
1
0
236
Dec ’25
visualBounds ignores TextComponents set for Entity. Workarounds?
After adding TextComponents to my Entities on visionOS, I have observed that visualBounds will ignore the TextComponents. Documentation states that it should render a rounded rectangle mesh. These mashes are visible on the device, but not visible in the debugger ("Capture Entity Hierarchy") and ignored by visualBounds. Am I missing something? static func makeDirection(_ direction: Direction) -> Entity { let text = Entity() text.name = direction.rawValue text.setScale(SIMD3(repeating: 5), relativeTo: nil) text.transform.rotation = direction.rotation text.components.set(direction.textComponent) return text } My workaround is to add a disabled ModelEntity and take its bounds 😬
1
0
299
Dec ’25
CapturedRoom.Section is missing a lot of information
The Section struct only publicly makes the center property available, but this is a SIMD3 that doesn't seem to line up with the rest of the model. All other objects have a 4x4 transform matrix that accurately gives each position and rotation. When inspecting a Section in the debugger, many more properties are visible such as polygon and transform. Why are these not visible? The transform in particular seems necessary to make any sort of use of the Sections.
1
0
392
Sep ’25
ManipulationComponent in both parent and child entities
Hello, In my project, I have attached a ManipulationComponent to Entity A and as expected, I'm able interact with it using the built-in gestures. I have another Entity B which is a child of A that I would like to interact with as well, so I attempted to add a ManipulationComponent to B. However, no gestures seem to be registered on B; I can still interact with A but B cannot be interacted with despite having ManipulationComponents on both entities. So I'm wondering if I'm just doing something wrong, if this is an issue with the ManipulationComponent, or if this is a limitation of the API. Attached is the code used to add the ManipulationComponent to an Entity and it was done on both A and B: let mc = ManipulationComponent() model.components.set(mc) var boxShape = ShapeResource.generateBox(width: 0.25, height: 0.05, depth: 0.25) boxShape = boxShape.offsetBy(translation: simd_float3(0, -0.05, -0.25)) ManipulationComponent.configureEntity(model, collisionShapes: [boxShape]) if var mc = model.components[ManipulationComponent.self] { mc.releaseBehavior = .stay mc.dynamics.inertia = .low model.components.set(mc) } I am using visionOS 26.0; let me know if there's any additional information needed.
1
0
378
Oct ’25
RealityView attachment draw order
My visionOS 26.3 app displays a diorama-like scene in a RealityView in a mixed immersive space, about 1 meter square, with view attachments floating above the scene. Each view attachment fades out after user interaction, by animating the view's opacity. What I'm observing is that depending on the position of a view attachment relative to the scene and the camera, an unwanted cutout effect is observed (presumably because of draw order issues), as shown in the right column in the screenshots below. YouTube video link of these sequences: https://youtu.be/oTuo0okKCkc (19 seconds) My question: How does visionOS determine the view attachment draw order relative to the RealityView scene? If I better understood how the draw order is determined, I could modify my scene to ensure that the view attachments were always drawn after the scene, fixing the unwanted cutout effect. I've successfully used ModelSortGroupComponent to control the draw order of entities within the RealityView scene, but my understanding is that this approach cannot be used with view attachments. I've submitted FB22014370 about this issue. Thank you.
1
0
373
1w
How to break the progress of Entity.animate()
Entity.animate() makes entity animation much easier, but in many cases, I want to break the progress because of some gestures, I couldn't find any way to do this, including tried entity.stopAllAnimations(), I have to wait till Entity.animate() completes. iOS 26 / visionOS 26
Replies
1
Boosts
0
Views
367
Activity
Sep ’25
Sticky Horizontal AnchorEntity
Hi, I'm trying to use AnchorEntity for horizontal surfaces. It works when the entity is being created, but I'm looking for a way to snap this entity to the nearest surface, after translating it, for example with a DragGesture. What would be the best way to achieve this? Using raycast, creating a new anchor, trackingMode to continuous etc. Do I need to use ARKitSession as I want continuous tracking?
Replies
1
Boosts
0
Views
278
Activity
Feb ’26
iOS needs to allow for background bluetooth scanning. I can't fully build my app.
iOS currently restricts background Bluetooth advertising and scanning in order to preserve battery life and protect user privacy. While these restrictions serve important purposes, they also limit legitimate use cases where users have explicitly opted in to proximity-based experiences. The core challenge is that modern social applications need a way to detect when users are physically present at the same location or event without requiring every participant to keep their app in the foreground. Under the current system, background BLE advertising is heavily throttled and can only transmit a limited payload, background scanning intervals are sparse and unpredictable, peer-to-peer proximity detection cannot be maintained reliably when apps are in the background, and Background App Refresh is non-deterministic, making any kind of time-based proximity validation impossible. A proposed enhancement would be to introduce an “Enhanced Proximity Permission.” This would allow developers to enable reliable background BLE advertising and scanning for declared time windows, such as a maximum of eight hours. It would also allow devices running the same app to detect each other’s proximity using ephemeral, rotating identifiers that preserve privacy, with clear user consent and prominent indicators whenever the feature is active. Unlocking this capability would open up new categories of applications. Live events could offer automatic attendance tracking at concerts, conferences, or sports venues. Retail environments could support opt-in foot traffic analysis and dwell-time insights. Social apps could allow users to find friends at festivals, campuses, or other large venues. Safety applications could extend to crowd density monitoring and contact tracing beyond COVID-era needs. Gaming could offer real-world multiplayer experiences based on physical proximity, and transportation providers could verify rideshare pickups or measure public transit flows automatically. Privacy safeguards would remain central. Permissions would be time-boxed and expire after an event or session. A mandatory visual indicator would be displayed whenever proximity tracking is active. A user-facing dashboard would show all apps granted enhanced proximity access. Permissions would automatically be revoked after a period of non-use, and only ephemeral tokens not permanent identifiers would be broadcast. The industry impact would be significant. With this enhancement, iOS could power the next generation of location-aware social platforms while maintaining Apple’s leadership in privacy through explicit user control and transparency. Current alternatives, such as requiring users to keep apps in the foreground or deploying dedicated hardware beacons, produce poor user experiences and constrain innovation in spatial computing and social applications. Can anyone from Apple consider this change? Having to buy iBeacons is brutal and means slower adoption. Please reconsider this for users who opt in.
Replies
1
Boosts
0
Views
1.2k
Activity
Sep ’25
How to Renew visionOS Enterprise API Entitlements?
How can I renew visionOS Enterprise API? I've spent so much time contacting Apple Developer Support. They said they don't know the renewal process either and are "checking with the internal operations team" - but it's been 2 months with no updates. The official documentation (https://aninterestingwebsite.com/documentation/visionOS/building-spatial-experiences-for-business-apps-with-enterprise-apis#Request-the-entitlements) says: "The license file comes with an expiration date, so you need to renew it before then to ensure your entitlements continue to function." But it doesn't explain HOW to renew. When I asked Apple Support about this, they told me: "After Apple approves your app for one or more entitlements, you receive a license file, along with additional instructions." But I never received any instructions when I was first approved, and I still don't know how to renew. There's also no direct way to contact the Enterprise API team. Now my visionOS Enterprise API license has been expired for 2 months. I submitted a renewal request, but I still haven't heard anything back. Is it normal to take more than 2 months for approval? Any advice or shared experiences would be really helpful. Thanks!
Replies
1
Boosts
0
Views
508
Activity
Jan ’26
visionOS Widget Bug
When I was developing the visionOS 26beta Widget, I found that it could not work normally when the real vision OS was running, and an error would appear. Please adopt container background api It is worth mentioning that this problem does not occur on the visionOS virtual machine. Does anyone know what the reason and solution are, or whether this is a visionOS error that needs Feedback? Thank you!
Replies
1
Boosts
0
Views
470
Activity
Sep ’25
CustomMaterial disable unlit tone mapping
Hi, since iOS 18 UnlitMaterial and ShaderGraphMaterial have the option to disable tone mapping, e.g via https://aninterestingwebsite.com/documentation/realitykit/unlitmaterial/init(applypostprocesstonemap:) Is it possible to do the same for CustomMaterial? I tried initializing a CustomMaterial based on an UnlitMaterial where tone mapping is disabled, like so: let unlitMat = UnlitMaterial(applyPostProcessToneMap: false) let customMaterial = try CustomMaterial( from: unlitMat, surfaceShader: surfaceShader, geometryModifier: geometryModifier ) but that does not seem to work. The colors of my texture still look altered in comparison to a plain UnlitMaterial or a ShaderGraphMaterial where its disabled. Any hints? Thank you!
Replies
1
Boosts
0
Views
145
Activity
Jun ’25
Need to rotate child of a 3D mesh
I am creating a vision pro app with a 3D model, it has a mesh hierarchy of head, hands, feet etc. I want the character to look towards the camera, but am not able to access head of character through sceneKit nor reality kit. when I try to print names of the child meshes, it only prints till the character, it does iterate through all the body parts. Can anyone help?
Replies
1
Boosts
0
Views
228
Activity
Sep ’25
Draw An Outline Around a Model Entity
Hi, Is there a resource or sample code about how to draw an outline around a mesh in RealityKit? Typically, this is useful for visualizing a selection, like in Reality Composer Pro. How to achieve such effect? A shader material? A post-process effect in ARView or RealityRenderer? Methods such as duplicating the entity mesh, scaling it, and using material.faceCulling = .front did not look good in my experiments. Thank you.
Replies
1
Boosts
0
Views
542
Activity
Feb ’26
The folding and unfolding effect of the NBA sand table
Seeing this magical sand table, the unfolding and folding effects are similar to spreading out cards, which is very interesting. But I don't know how to achieve it. I want to see if there are any ways to achieve this effect and give some ideas. May I ask if this effect can be achieved under the existing API
Replies
1
Boosts
0
Views
99
Activity
May ’25
Can I use `FromToByAction` to animate the ShaderGraphMaterial parameters?
Can I combine FromToByAction and BindTarget.MaterialPath to animate my ShaderGraphMaterial. I don't know how to use the BindTarget.MaterialPath.
Replies
1
Boosts
0
Views
313
Activity
Sep ’25
RealityKit_DirectionalLight_Question
My application calculates three distinct Meesus Double [x, y, z] Radian values to light a sphere in RealityKit with DirectionalLight. It is my understanding that I must use (simd_quatf) for each radian value to properly light the sphere in the view. The code correctly [orientates] the sphere with the combined (simd_quatf) DirectionalLight in the view, but the illumination (Z-axis) fails to properly illuminate the sphere with the expected result, compared to associated Meesus web page images. For the moment, I do not know how to correct the (Z-axis). Curious for a suggestion ... :] // Location values. let theLatitude: Double = 51.13107260 let theLongitude: Double = -114.01127910 let currentDate: Date = Date() struct TheCalculatedMoonPhaseTest_ContentView: View { var body: some View { VStack { if #available(macOS 15.0, *) { RealityView { content in let moonSphere_Entity = Entity.createSphere(radius: 0.90, color: .black) moonSphere.Entity.name = "MoonSphere" moonSphere.Entity.position = SIMD3<Float>(x: 0, y: 0, z: 0) content.add(moonSphere.Entity) let sunLight_Entity = createDirectionalLight(latitude: theLatitude, longitude: theLongitude, date: currentDate) content.add(sunLight_Entity) } // End of [RealityView] } else { // Earlier version required. } // End of [if #available(macOS 15.0, *)] } // End of [VStack] .background(Color.black) } // End of [var body: some View] // MARK: - 🟠🟠🟠🟠 [SET THE BACKGROUND COLOUR] 🟠🟠🟠🟠 var backgroundColor: Color = Color.init(.black) // MARK: - 🟠🟠🟠🟠 [CREATE THE DIRECTIONAL LIGHT FOR THE SPHERE] 🟠🟠🟠🟠 func createDirectionalLight(latitude: Double, longitude: Double, date: Date) -> Entity { let directionalLight = DirectionalLight() directionalLight.light.color = .white directionalLight.light.intensity = 1000000 directionalLight.shadow = DirectionalLightComponent.Shadow() directionalLight.shadow?.maximumDistance = 5 directionalLight.shadow?.depthBias = 1 // MARK: 🟠🟠🟠🟠 Retrieve the [MEESUS MOON AGE VALUES] from the [CONSTANT FOLDER] 🟠🟠🟠🟠 let theMeesusMoonAge_LunarAgeDaysValue = 25.90567592898601 if theMeesusMoonAge_LunarAgeDaysValue >= 23.10 && theMeesusMoonAge_LunarAgeDaysValue < (29.530588853 - 1.00) { let someCalculatedX_WestEastRadian: Float = Float(1.00) // Identify the sphere’s DirectionalLight Tilt Angle (Y) radian value :: // Note :: The following Tilt Angle is corrected to [Zenith] with the [MeesusCalculatedTilt_Angle] minus the [MeesusCalculatedPar_Angle]. let someCalculatedY_TiltAngleRadian: Float = Float(1.3396086) // Identify the sphere’s DirectionalLight Illumination (Z) radian Value :: // Note :: The Meesus calculated illumination fraction is converted to degrees, then converted to a radian value. let someCalculatedZ_IlluminationAngleRadian: Float = Float(0.45176168630244457) // <=== 14.3800% Illumination. // Define rotation angles in radians for X, Y, and Z axes. let x_Radians = someCalculatedX_WestEastRadian let y_Radians = someCalculatedY_TiltAngleRadian let z_Radians = someCalculatedZ_IlluminationAngleRadian // Identify and separate the quaternion [simd_quatf] for each Radian. let q_X = simd_quatf(angle: x_Radians, axis: SIMD3<Float>(1, 0, 0)) let q_Y = simd_quatf(angle: y_Radians, axis: SIMD3<Float>(0, 1, 0)) let q_Z = simd_quatf(angle: z_Radians, axis: SIMD3<Float>(0, 0, 1)) // Apply and combine the rotations, where order matters. let combinedRotation = q_Z * q_Y * q_X // Identify the [Combined Rotation]. // The [MyMoonMeesus] :: [WANING CRESCENT] calculated [combinedRotation] :: simd_quatf(real: 0.73715997, imag: SIMD3<Float>(0.24427173, 0.61516714, -0.13599981)) ° Radians // Normalize the [combinedRotation]. let theNormalizesRotation = simd_normalize(combinedRotation) // Identify the [Normalized Combined Rotation]. // The [MyMoonMeesus] :: [WANING CRESCENT] calculated [normalizedRotation] :: simd_quatf(real: 0.73715997, imag: SIMD3<Float>(0.24427173, 0.61516714, -0.13599981)) ° Radians // Assume the [theNormalizesRotation] appears reversed. let theCorrectedRotation = theNormalizesRotation.inverse // Identify the [Reversed Combined Rotation]. // The [MyMoonMeesus] :: [WANING CRESCENT] calculated [correctedRotation] :: simd_quatf(real: 0.73715997, imag: SIMD3<Float>(-0.24427173, -0.61516714, 0.13599981)) ° Radians // Apply the [Corrected Rotation] to the entity. directionalLight.transform.rotation *= theCorrectedRotation // Add the [directionalLight] to the scene :: let anchor = AnchorEntity() anchor.addChild(directionalLight) } // End of [if theMeesusMoonAge_LunarAgeDaysValue >= 23.10 && theMeesusMoonAge_LunarAgeDaysValue < (29.530588853 - 1.00)] return directionalLight } // End of [func createDirectionalLight(latitude: Double, longitude: Double, date: Date) -> Entity] } // End of [struct TheCalculatedMoonPhaseTest_ContentView: View] // MARK: 🟠🟠🟠🟠 [ENTITY HELPER EXTENSION] 🟠🟠🟠🟠 extension Entity { static func createSphere(radius: Float, color: NSColor) -> Entity { let mesh = MeshResource.generateSphere(radius: radius) var material = PhysicallyBasedMaterial() material.baseColor = .init(tint: color) let modelComponent = ModelComponent(mesh: mesh, materials: [material]) let entity = Entity() entity.components.set(modelComponent) entity.components.set(Transform()) return entity } // End of [static func createSphere(radius: Float, color: NSColor) -> Entity] } // End of [extension Entity] // Application Image :: Calgary // Website Image :: timeanddate // mooncalc.org
Replies
1
Boosts
0
Views
176
Activity
Feb ’26
Using AVAsynchronousKeyValueLoading.load() on an AVAssetTrack gives an error
I'm seeing this error while attempting to compile my VisionOS app under Xcode 26. My existing code looks like: let (naturalSize, formatDescriptions, mediaCharacteristics) = try? await videoTrack.load(.naturalSize, .formatDescriptions, .mediaCharacteristics) This is now giving a compiler error: Type of expression is ambiguous without a type annotation I don't see that anything that was changed or deprecated in the latest version. Also loading the properties individually seems to work fine i.e.: let naturalSize = try? await videoTrack.load(.naturalSize) let formatDescriptions = try? await videoTrack.load(.formatDescriptions) let mediaCharacteristics = try? await videoTrack.load(.mediaCharacteristics)
Replies
1
Boosts
0
Views
122
Activity
Jun ’25
Pinning Widgets in VisionOS Simulator
I am trying to run widgets on visionOS 26. Specifically I am trying to pin them to the simulator room's walls, however I am unable to do so. Is this a limitation with the visionOS simulator right now, or am I missing a trick here?
Replies
1
Boosts
0
Views
116
Activity
Jun ’25
Foveated Streaming - Can I stream Immersive Video from Mac
This is a very exciting feature in 26.4 beta. But from the document, it seems can only integrate with NVIDIA CloudXR™ SDK. I'm wondering if it's possible to use this tool to stream immersive video from Mac to Vision Pro?
Replies
1
Boosts
0
Views
738
Activity
4w
ImmersiveSpace orphaned when WindowGroup closes
Environment visionOS 26.1, Xcode 26.1.1 Problem When a WindowGroup opens an ImmersiveSpace and the user closes the window via X button, the async Task in .onDisappear gets cancelled before dismissImmersiveSpace() completes, leaving the ImmersiveSpace active with no way to exit. Steps WindowGroup opens ImmersiveSpace in .onAppear User clicks X to close window .onDisappear fires but async cleanup cancelled ImmersiveSpace remains active, user trapped Expected ImmersiveSpace dismissed when window closes Actual ImmersiveSpace remains active Code .onAppear { Task { await openImmersiveSpace(id: "VideoCallMainCamera") } } .onDisappear { Task { await dismissImmersiveSpace() // Gets cancelled } } What I've Tried Task in .onDisappear ❌ scenePhase monitoring ❌ High priority Task ❌ .restorationBehavior(.disabled) + .defaultLaunchBehavior(.suppressed) ✅ (prevents restoration but doesn't fix immediate cleanup) Question What's the recommended pattern for ensuring ImmersiveSpace cleanup when WindowGroup closes? Is there a way to block window closure until async cleanup completes, or should ImmersiveSpaces automatically dismiss with their parent window?
Replies
1
Boosts
0
Views
236
Activity
Dec ’25
visualBounds ignores TextComponents set for Entity. Workarounds?
After adding TextComponents to my Entities on visionOS, I have observed that visualBounds will ignore the TextComponents. Documentation states that it should render a rounded rectangle mesh. These mashes are visible on the device, but not visible in the debugger ("Capture Entity Hierarchy") and ignored by visualBounds. Am I missing something? static func makeDirection(_ direction: Direction) -> Entity { let text = Entity() text.name = direction.rawValue text.setScale(SIMD3(repeating: 5), relativeTo: nil) text.transform.rotation = direction.rotation text.components.set(direction.textComponent) return text } My workaround is to add a disabled ModelEntity and take its bounds 😬
Replies
1
Boosts
0
Views
299
Activity
Dec ’25
CapturedRoom.Section is missing a lot of information
The Section struct only publicly makes the center property available, but this is a SIMD3 that doesn't seem to line up with the rest of the model. All other objects have a 4x4 transform matrix that accurately gives each position and rotation. When inspecting a Section in the debugger, many more properties are visible such as polygon and transform. Why are these not visible? The transform in particular seems necessary to make any sort of use of the Sections.
Replies
1
Boosts
0
Views
392
Activity
Sep ’25
ManipulationComponent in both parent and child entities
Hello, In my project, I have attached a ManipulationComponent to Entity A and as expected, I'm able interact with it using the built-in gestures. I have another Entity B which is a child of A that I would like to interact with as well, so I attempted to add a ManipulationComponent to B. However, no gestures seem to be registered on B; I can still interact with A but B cannot be interacted with despite having ManipulationComponents on both entities. So I'm wondering if I'm just doing something wrong, if this is an issue with the ManipulationComponent, or if this is a limitation of the API. Attached is the code used to add the ManipulationComponent to an Entity and it was done on both A and B: let mc = ManipulationComponent() model.components.set(mc) var boxShape = ShapeResource.generateBox(width: 0.25, height: 0.05, depth: 0.25) boxShape = boxShape.offsetBy(translation: simd_float3(0, -0.05, -0.25)) ManipulationComponent.configureEntity(model, collisionShapes: [boxShape]) if var mc = model.components[ManipulationComponent.self] { mc.releaseBehavior = .stay mc.dynamics.inertia = .low model.components.set(mc) } I am using visionOS 26.0; let me know if there's any additional information needed.
Replies
1
Boosts
0
Views
378
Activity
Oct ’25
How to make device cross into portal world.
I want to step into portal world. I've know PortalCrossingComponent can make an entity to cross portal, but how to make device cross into portal world?
Replies
1
Boosts
0
Views
141
Activity
Apr ’25
RealityView attachment draw order
My visionOS 26.3 app displays a diorama-like scene in a RealityView in a mixed immersive space, about 1 meter square, with view attachments floating above the scene. Each view attachment fades out after user interaction, by animating the view's opacity. What I'm observing is that depending on the position of a view attachment relative to the scene and the camera, an unwanted cutout effect is observed (presumably because of draw order issues), as shown in the right column in the screenshots below. YouTube video link of these sequences: https://youtu.be/oTuo0okKCkc (19 seconds) My question: How does visionOS determine the view attachment draw order relative to the RealityView scene? If I better understood how the draw order is determined, I could modify my scene to ensure that the view attachments were always drawn after the scene, fixing the unwanted cutout effect. I've successfully used ModelSortGroupComponent to control the draw order of entities within the RealityView scene, but my understanding is that this approach cannot be used with view attachments. I've submitted FB22014370 about this issue. Thank you.
Replies
1
Boosts
0
Views
373
Activity
1w