After reading several posts I see that I need to add the "com.apple.developer.web-browser.public-key-credential" capability to my macOS app in order to get it to work. So my noob question is where do I request this capability? Can I as a developer request it or does the Account owner need to request it? Once approved, how do I add it to my app's capabilities? Thanks for your patience

I want to confirm the specifications and behavior of Safari. We have a system built on Microsoft Azure that uses Azure AD B2C for authentication. When we logging in, there is a phone authentication feature where a call is made to the registered phone number. However, this phone authentication does not work properly only on iPhone's Safari. The specific situation is listed below: When performing phone authentication on iPhone's Safari, a call is made from Azure AD B2C, and pressing the # button on the Safari screen can be done. But then, it transitions to an error screen. We tried multiple iPhone devices and multiple iOS versions, but the result was the same. But when accessing the system on a PC, and performing phone authentication, it works without any errors. Also when we use browsers other than Safari (for example, Google Chrome and Firefox) on the iPhone, the phone authentication works without any errors, too. Even with Safari, if the device displaying the login screen and the device making the call are different, phone authentication works without any errors, too.(it fails if they are the same device). We reached out Microsoft about this issue, and they responded that: The Azure resource called FrontDoor at the front end of Azure AD B2C supports the HTTP/2 protocol, and HTTP/2 protocol is used in communication with Safari. In Safari's HTTP/2 communication, when a call is received while the screen is displayed, a reset packet is sent to the web server (in this case, the web server is FrontDoor). This interrupts the session, causing a session termination error on the Azure AD B2C side, and phone authentication fails. Therefore, we would like to ask you the following two points: In HTTP/2 communication, does the Safari browser send a reset packet to the web server when it receives a phone call? If so, what is the cause of this behavior? And are there any measures to prevent the reset packet from being sent?

After updating to iOS 18.4, our web application (with service workers) crashes on devices that accessed it prior to the update. This issue also affects hybrid mobile apps using the same web application; reinstalling the app resolves it by refetching and reinstalling service workers. Debugging is challenging because clearing the cache or reinstalling the app fixes the problem, and no useful error logs are available. Has anyone encountered similar crashes related to service workers after an iOS update and have any insights into the cause?

What happens if Safari is uninstalled or disabled on iOS? Will SFafariviewcontroller still work? Kind regards

I’m encountering an issue on iOS when rendering a list using React. Each list item uses the array index as the React key and consists of two parts: a header section that uses position: sticky for dynamic sticking behavior, and a body section whose height is automatically adjusted based on its content. When the list data is updated, I sometimes observe that the sticky header content does not update visually in time, even though the underlying data and DOM have changed. // demo.jsx import React, { useState } from 'react'; import { Button } from '@iftide/mobile'; import './style2.less'; // import data1 from './data1.json'; // import data2 from './data2.json'; const prefixCls = 'im-detaillist'; const data1 = [ { sectionTitle: '2025年05月' }, { sectionTitle: '2025年04月' }, { sectionTitle: '2025年03月' } ]; const data2 = [ { sectionTitle: '2023年08月' }, { sectionTitle: '2023年07月' }, { sectionTitle: '2023年06月' }, { sectionTitle: '2023年05月' } ]; export default function App() { const [list, setList] = useState(data1); const [toggle, setToggle] = useState(true); return ( <div> <Button title="更新2" onClick={() => { setToggle(!toggle); setList(data2); }} /> <div className={`${prefixCls}-container2`} style={{ height: `700px` }}> {list.map((section: any, sectionIdx: number) => { return ( <div className={`${prefixCls}`} key={String(sectionIdx)} // id={section.sectionTitle} > <div className={`${prefixCls}-section-title`} role="text"> {section.sectionTitle} </div> <div style={{ background: 'green', height: `${Math.ceil(400 * Math.random()) + 50}px` }} > 省略 </div> </div> ); })} </div> </div> ); } .@{prefixCls}-section-title { position: sticky; position: -webkit-sticky; will-change: transform; top: 0; z-index: 1; padding-left: 11px; width: 100%; height: 30px; font-size: var(--font-size-s); font-weight: 400; line-height: 30px; color: #000000; background-color: #F4F5F7; letter-spacing: 0; }

Hi, I’m working on a Safari extension for macOS, and I’d like the app to use specific system notification settings right after installation. I’m wondering if there’s a way in Swift to programmatically configure the default notification preferences (as seen in System Settings > Notifications > [my app]). Here are the desired settings: Only Desktop – without “Notification Center” or “Lock Screen” Alert Style: Temporary Badge App Icon: Enabled Play Sound for Notifications: Disabled Show Previews: When Unlocked Notification Grouping: Off (I don’t want them to accumulate in Notification Center) Here is the code I’m currently using to display a basic notification: private func handleNotificationRequest(_ message: [String: Any]) { guard let title = message["title"] as? String, let body = message["body"] as? String else { return } UNUserNotificationCenter.current().requestAuthorization(options: [.alert, .badge, .sound]) { granted, error in if granted { self.showNotification(title: title, body: body) } } } private func showNotification(title: String, body: String) { let content = UNMutableNotificationContent() content.title = title content.body = body content.sound = nil // No sound for subtle notification // Create notification that doesn't persist in notification center let trigger = UNTimeIntervalNotificationTrigger(timeInterval: 0.1, repeats: false) let request = UNNotificationRequest(identifier: "fast-url-copy-notification", content: content, trigger: trigger) UNUserNotificationCenter.current().add(request) { error in if let error = error { os_log(.error, "Failed to show notification: %@", error.localizedDescription) } } } OS: macOS 26.0 Thanks in advance, Mateusz

"We have a multi-tenant EdTech platform serving over 1500 clients, each with a unique domain (e.g., client1.eduapp.com). We use WKWebView in a native shell. Due to WKAppBoundDomains restriction, we can't dynamically list all domains. How can we support dynamic tenants while maintaining cookie persistence" "Can Apple suggest a best practice or alternative approach for apps using WebView/PWA shell architecture across multiple client domains?" Problem: We cannot predefine all 1500 domains in WKAppBoundDomains due to limitations. As a result: Service workers fail to register, breaking PWA functionality Ex: Offline.

The extension popups don't seem to support the dark mode media query. The only way the query gets detected is when a color-scheme is added: <meta name="color-scheme"content="light dark">

Hi! I'm trying to implement ASWebAuthenticationSession to log in to my app via the web app backend. However, I'm a bit confused about the cookies that this has access to. When I set prefersEphemeralWebBrowserSession=false it does not seem to use the cookies from Safari. Or at least, I'm logged into my web app in Safari, but when I use ASWebAuthenticationSession I still have to log in again. Does it not share session cookies with Safari? I did notice that if I don't use an ephemeral session, once I log out and try to log back in my app does automatically log me in but that's actually unhelpful in my opinion because now I have no way to clear that session because it only lives in the ASWebAuthenticationSession context. If that's the case I may as well use the ephemeral session then because it seems to have only drawbacks.

Actually this is a duplicate for https://aninterestingwebsite.com/forums/thread/106537 but in web-specific forums section. Is there any video/audio codec best practices, guides, recommendations for app/web developers for best performance (take advantage from HW acceleration), power consumption saving? What are officially supported media containers? What are video encoding profiles, video dimensions, frame rates? The only official source I have found is https://aninterestingwebsite.com/documentation/webkit/delivering-video-content-for-safari?language=objc. But h264 is pretty old. I experimentally found that the VP9 video format is also supported on iOS newer versions. But is this a requirement? Сan i be sure that the video will play on all devices? My goal is to provide web media content (which will be rendered in my application using WKWebView API) that will be supported by most devices (both iOS and MacOS), takes advantage of such features as hardware decode acceleration and be efficient. Any hints/info is highly appreciated. Best regards.

使用direct distribution进行分发时，safari web extension 在safari setting 中显示没有权限读取、修改或传输任何网页的内容。 但是我在看公证日志显示插件是正常的公证的 这导致safari extension 无法使用。 公证日志 https://www.coupert.com/img/2025-04-10/notarization-log.json

Merhaba ben Müslüm İkuz blog sayfam için Safari tarayıcıdan siteye çok fazla istek geliyor. Sayaçlara girdiğimde uygulama safari olarak gözüküyor ve binlerce sayfa isteği gelmiş. Bu bir siber saldırı mı ? site adress https://ikuz.com.tr/

Bit of an odd one here, just keen to understand if it’s just me or a more generic issue. For all other apps, I can drag the icon from the dock to place into stage manager left, centre or right. However when I try to do the same with Safari (and only Safari), it just doesn’t work at all. I can repeat this 100%, has been an issue with 26.0, 26.1 and now 26.2. Can confirm this isn’t a problem on my 11” M4 iPad pro running same O/S. Here is a video showing the issue (YouTube) https://youtu.be/0WBGBZVHsfs

"The Referer header allows a server to identify referring pages that people are visiting from or where requested resources are being used. " This header is never forwarded to server when the user is browsing the website in a WebView. This is properly maintained by other browsers but not in-app. How do I include it?

We attempted to perform automated testing (using Python) on an 11th generation iPad (iPad A16) using Selenium 4.38.0, but we were unable to capture webpage screenshots using the function "driver.save_screenshot(filename)". However, this issue did not occur on an iPad Air 4. During our debugging of the "WebDriver.py" script, we found that after issuing the screenshot command, a status value of 500 was returned, accompanied by an "unknown error". We have communicated with the Selenium team and provided the main Python code(https://github.com/SeleniumHQ/selenium/issues/16555). They suggested that the problem likely lies within the SafariWebDriver, rather than in the "remote_webdriver.py" file. Additionally, we tried using the SafariWebDriver provided by Safari Technology Preview, but the problem persisted.

I am a newby to JavaScript, suggested to me to use to automate the task of opening of a Web page, selecting three internal buttons in sequence to download the underlying chart data. I have created the App via Automator on macOS, to run the Script, successfully open the Web Page, but cannot find a way to select and click() on the buttons. Can someone please help me. Robert. This is the code suggested by Grok 3 Beta, but I see this error: Error: First parameter passed to Document Constructor must be an object. function run(input, parameters) { var Safari = Application('Safari'); Safari.activate(); // Open the AEMO data dashboard (Grok 3 Beta recomendation opens the web page correctly) Safari.Document().make(); Safari.windows[0].currentTab.url = 'https://www.aemo.com.au/energy-systems/electricity/national-electricity-market-nem/data-nem/data-dashboard-nem'; delay(10); // Wait for page to load // Click the Fuel Mix tab (target the active in the tabs) Safari.Document(0).doJavaScript("document.querySelector('.tabs .active').click()"); delay(5); // Wait for tab content to load // Select 48 hrs from the dropdown Safari.Document(0).doJavaScript("document.querySelector('#interval').value = '48H'; document.querySelector('#interval').dispatchEvent(new Event('change'))"); delay(5); // Wait for selection to take effect // Click the download button Safari.Document(0).doJavaScript("document.querySelector('.visualisation-icon-button').click()"); return input; }

My app has been published by 2 months now I still I cant get Universal Links to work. I checked a lot of docs as well as videos about setting up universal links. Everyone with clear steps: Add the well-known json file to the server. Already validated by AASA web validator. Add the Associated domain on project capabilities, with the Web page root only. Eg: applinks:example:com. Install the app and trying clicking a link from notepad. Or instead make a long press to deploy contextual menu to see if my app is on the selectable options to open the link. My app is not been open in any of my attempts and the console always trying to use safari. I had a couple of screenshots of my testing. I really need help with this.

We have written a PAC script that blocklists certain domains and whitelists others. We went to Settings > Network > Wi-Fi (the network we are using), then clicked on Details, and under Proxies, we added the PAC file URL in the Automatic Proxy Configuration section. We tried hosting the PAC file both on localhost and on a separate HTTP server. After saving the settings, we tested several URLs. The blocking and allowing behavior works correctly in all browsers except Safari. Below is the PAC script we are using for your reference. The script works as expected in browsers other than Safari. This is how the PAC script URL looks: http://localhost:31290/proxy.pac function FindProxyForURL(url, host) { var blacklist = new Set(["facebook.com", "deepseek.com"]); var b_list = [...blacklist]; for (let i = 0; i < b_list.length; i++) { let ele = b_list[i] + "*"; if (shExpMatch(host, ele) || shExpMatch(url, ele)) { return "PROXY localhost:8086"; } } if (isIPBlocked(whitelist_subnet, hostIP)) { return "PROXY localhost:8087"; } if (isIPBlocked(blacklist_subnet, hostIP)) { return "PROXY localhost:8086"; } return "PROXY localhost:8080"; }

Safari Web Extension for enterprice distribution: If I press run button on xcode it shows the safari web extension toggle and works perfect When installed through exported ipa, the web extension toggle dissapears, it doesnt matter how it was installed through mdm, link, or directly ipa from xcode I just exported an ipa as debugging and it worked when I pushed the ipa

I have a UI application built with the Vue framework, using Vuetify for the UI components. There's a div with the class v-application--wrap, which is provided by Vuetify. This class internally includes the following style rule. .v-application--wrap { backface-visibility: hidden; display: flex; flex: 1 1 auto; flex-direction: column; max-width: 100%; min-height: 100vh; position: relative; } The pages were rendering correctly up to version 18.3, but after upgrading to version 18.4, we encountered layout issues related to height. Upon investigation, we discovered that the min-height property was no longer being interpreted or applied correctly. Replacing min-height with height resolved the issue, and the pages began loading as expected. Any insights into why this behavior is occurring would be greatly appreciated.