Prioritize user privacy and data security in your app. Discuss best practices for data handling, user consent, and security measures to protect user information.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Device identifier for framework
I want iOS device identifier for a framework that is used in multiple vendor's apps. I'm developing a framework to control a peripheral. The framework has to send unique information to register the device with the peripheral. My naive idea was to use IdentifierForVendor. But this API provides the device identifier for the same vendor's apps, not the framework. (The framework will be used by multiple vendors.) Is there a usable device identifier for the framework, regardless of app vendor? Please tell me any solution.
1
0
95
Jul ’25
Unsandboxed app can't modify other app
I work for Brave, a browser with ~80M users. We want to introduce a new system for automatic updates called Omaha 4 (O4). It's the same system that powers automatic updates in Chrome. O4 runs as a separate application on users' systems. For Chrome, this works as follows: An app called GoogleUpdater.app regularly checks for updates in the background. When a new version is found, then GoogleUpdater.app installs it into Chrome's installation directory /Applications/Google Chrome.app. But consider what this means: A separate application, GoogleUpdater.app, is able to modify Google Chrome.app. This is especially surprising because, for example, the built-in Terminal.app is not able to modify Google Chrome.app. Here's how you can check this for yourself: (Re-)install Chrome with its DMG installer. Run the following command in Terminal: mkdir /Applications/Google\ Chrome.app/test. This works. Undo the command: rm -rf /Applications/Google\ Chrome.app/test Start Chrome and close it again. mkdir /Applications/Google\ Chrome.app/test now fails with "Operation not permitted". (These steps assume that Terminal does not have Full Disk Access and System Integrity Protection is enabled.) In other words, once Chrome was started at least once, another application (Terminal in this case) is no longer allowed to modify it. But at the same time, GoogleUpdater.app is able to modify Chrome. It regularly applies updates to the browser. For each update, this process begins with an mkdir call similarly to the one shown above. How is this possible? What is it in macOS that lets GoogleUpdater.app modify Chrome, but not another app such as Terminal? Note that Terminal is not sandboxed. I've checked that it's not related to codesigning or notarization issues. In our case, the main application (Brave) and the updater (BraveUpdater) are signed and notarized with the same certificate and have equivalent requirements, entitlements and provisioning profiles as Chrome and GoogleUpdater. The error that shows up in the Console for the disallowed mkdir call is: kernel (Sandbox) System Policy: mkdir(8917) deny(1) file-write-create /Applications/Google Chrome.app/foo (It's a similar error when BraveUpdater tries to install a new version into /Applications/Brave Browser.app.) The error goes away when I disable System Integrity Protection. But of course, we cannot ask users to do that. Any help would be greatly appreciated.
4
0
312
May ’25
ASPasswordCredential Returns a Blank Password with Apple Password App
Using the simplified sign-in with tvOS and a third party password manager, I receive a complete ASPasswordCredential, and I can easily log into my app. When I do the same thing but with Apple's password manager as the source, I receive an ASPasswordCredential that includes the email address, but the password is an empty string. I have tried deleting the credentials from Apple Passwords and regenerating them with a new login to the app's website. I have tried restarting my iPhone. Is this the expected behavior? How should I be getting a password from Apple's Password app with an ASAuthorizationPasswordRequest?
2
0
300
Aug ’25
Help with Entitlements for Keychain Access
Hi everyone, I’m working an Objective-C lib that performs Keychain operations, such as generating cryptographic keys and signing data. The lib will be used by my team in a Java program for macOS via JNI. When working with the traditional file-based Keychain (i.e., without access control flags), everything works smoothly, no issues at all. However, as soon as I try to generate a key using access control flags SecAccessControlCreateWithFlags, the Data Protection Keychain returns error -34018 (errSecMissingEntitlement) during SecKeyCreateRandomKey. This behavior is expected. To address this, I attempted to codesign my native dynamic library (.dylib) with an entitlement plist specifying various combinations of: keychain-access-groups com.apple.security.keychain etc. with: My Apple Development certificate Developer ID Application certificate Apple Distribution certificate None of these combinations made a difference, the error persists. I’d love to clarify: Is it supported to access Data Protection Keychain / Secure Enclave Keys in this type of use case? If so, what exact entitlements does macOS expect when calling SecKeyCreateRandomKey from a native library? I’d really appreciate any guidance or clarification. Thanks in advance! Best regards, Neil
1
0
421
Jul ’25
API: SecPKCS12Import; error code: -25264; error message: MAC verification failed during PKCS12 import (wrong password?)
Problem Statement: Pre-requisite is to generate a PKCS#12 file using openssl 3.x or above. Note: I have created a sample cert, but unable to upload it to this thread. Let me know if there is a different way I can upload. When trying to import a p12 certificate (generated using openssl 3.x) using SecPKCS12Import on MacOS (tried on Ventura, Sonoma, Sequoia). It is failing with the error code: -25264 and error message: MAC verification failed during PKCS12 import (wrong password?). I have tried importing in multiple ways through, Security Framework API (SecPKCS12Import) CLI (security import <cert_name> -k ~/Library/Keychains/login.keychain -P "<password>”) Drag and drop in to the Keychain Application All of them fail to import the p12 cert. RCA: The issues seems to be due to the difference in the MAC algorithm. The MAC algorithm used in the modern certs (by OpenSSL3 is SHA-256) which is not supported by the APPLE’s Security Framework. The keychain seems to be expecting the MAC algorithm to be SHA-1. Workaround: The current workaround is to convert the modern p12 cert to a legacy format (using openssl legacy provider which uses openssl 1.1.x consisting of insecure algorithms) which the SecPKCS12Import API understands. I have created a sample code using references from another similar thread (https://aninterestingwebsite.com/forums/thread/723242) from 2023. The steps to compile and execute the sample is mentioned in the same file. PFA the sample code by the name “pkcs12_modern_to_legacy_converter.cpp”. Also PFA a sample certificate which will help reproduce the issue by the name “modern_certificate.p12” whose password is “export”. Questions: Is there a fix on this issue? If yes, pls guide me through it; else, is it expected to be fixed in the future releases? Is there a different way to import the p12 cert which is resistant to the issue? This issue also poses a security concerns on using outdated cryptographic algorithms. Kindly share your thoughts. pkcs12_modern_to_legacy_converter.cpp
11
0
511
Apr ’25
ASWebAuthenticationSession + Universal Links Callback Issue
Problem Description: In our App, When we launch the web login part using ASWebAuthentication + Universal Links with callback scheme as "https", we are not receiving callback. Note: We are using "SwiftUIWebAuthentication" Swift Package Manager to display page in ASWebAuth. But when we use custom url scheme instead of Universal link, app able to receive call back every time. We use ".onOpenURL" to receive universal link callback scheme.
4
0
266
Jul ’25
ASWebAuthenticationSession password autofill iOS 18.5 broken
I have been implementing an sdk for authenticating a user. I have noticed that on iOS 18.5, whether using SFSafariViewController, or the sdk (built on ASWebAuthenticationSession), password autofill does not work. I have confirmed it works on a different device running iOS 18.0.1. Are there any work arounds for this at this time? Specifically for ASWebAuthenticationSession?
2
0
257
Jul ’25
Will Security Layer Affect AASA File Accessibility?
Hi, I’d like to confirm something regarding the hosting of the apple-app-site-association (AASA) file. We have a server that publicly hosts the AASA file and is accessible globally. However, this server sits behind an additional security layer (a security server/reverse proxy). My question is: Will this security layer affect Apple’s ability to access and validate the AASA file for Universal Links or App Clips? Are there specific requirements (e.g. headers, redirects, TLS versions, etc.) that we need to ensure the security server does not block or modify? Any guidance or best practices would be appreciated.
1
0
323
Jul ’25
Validating Signature Of XPC Process
Quinn, you've often suggested that to validate the other side of an XPC connection, we should use the audit token. But that's not available from the XPC object, whereas the PID is. So everyone uses the PID. While looking for something completely unrelated, I found this in the SecCode.h file OSStatus SecCodeCreateWithXPCMessage(xpc_object_t message, SecCSFlags flags, SecCodeRef * __nonnull CF_RETURNS_RETAINED target); Would this be the preferred way to do this now? At least from 11.0 and up. Like I said, I was looking for something completely unrelated and found this and don't have the cycles right now to try it. But it looks promising from the description and I wanted to check in with you about it in case you can say yes or no before I get a chance to test it. Thanks
8
0
8.3k
Aug ’25
Error when using SecItemAdd with kSecReturnPersistentRef and user presence kSecAttrAccessControl
I'm trying to add a generic password to the keychain and get back the persistent ID for it, and give it .userPresence access control. Unfortunately, if I include that, I get paramError back from SecItemAdd. Here's the code: @discardableResult func set(username: String, hostname: String?, password: String, comment: String? = nil) throws -> PasswordEntry { // Delete any existing matching password… if let existing = try? getEntry(forUsername: username, hostname: hostname) { try deletePassword(withID: existing.id) } // Store the new password… var label = username if let hostname { label = label + "@" + hostname } var item: [String: Any] = [ kSecClass as String : kSecClassGenericPassword, kSecAttrDescription as String : "TermPass Password", kSecAttrGeneric as String : self.bundleID.data(using: .utf8)!, kSecAttrLabel as String : label, kSecAttrAccount as String : username, kSecValueData as String : password.data(using: .utf8)!, kSecReturnData as String : true, kSecReturnPersistentRef as String: true, ] if self.synchronizable { item[kSecAttrSynchronizable as String] = kCFBooleanTrue! } if let hostname { item[kSecAttrService as String] = hostname } if let comment { item[kSecAttrComment as String] = comment } // Apply access control to require the user to prove presence when // retrieving this password… var error: Unmanaged<CFError>? guard let accessControl = SecAccessControlCreateWithFlags(nil, kSecAttrAccessibleWhenUnlockedThisDeviceOnly, .userPresence, &error) else { let cfError = error!.takeUnretainedValue() as Error throw cfError } item[kSecAttrAccessControl as String] = accessControl item[kSecAttrAccessible as String] = kSecAttrAccessibleWhenUnlockedThisDeviceOnly var result: AnyObject! let status = SecItemAdd(item as CFDictionary, &result) try Errors.throwIfError(osstatus: status) load() guard let secItem = result as? [String : Any], let persistentRef = secItem[kSecValuePersistentRef as String] as? Data else { throw Errors.malformedItem } let entry = PasswordEntry(id: persistentRef, username: username, hostname: hostname, password: password, comment: comment) return entry } (Note that I also tried it omitting kSecAttrAccessible, but it had no effect.) This code works fine if I omit setting kSecAttrAccessControl. Any ideas? TIA!
6
0
175
Jul ’25
Prevent batch operations on Secure Enclave
Hi, I have an application that uses SecureEnclave keys to protect secrets. By passing an LAContext object to the Secure Enclave operations, authentication state can be preserved across decrypt operations, and you do not need to re-authenticate for doing different operations. However, for security reasons, I would like to avoid that it is possible to do operations in batch with certain keys generated by the Secure Enclave, by any application. This would avoid malicious binaries to batch-extract all the secrets that are protected by a key from my Secure Enclave, and force to re-authenticate on every operation. Is there a way to prevent batch operations without re-authenticating for Secure Enclave keys? thanks, Remko
1
0
610
Jan ’26
evaluatedPolicyDomainState
Hi Apple Developers, I'm having a problem with evaluatedPolicyDomainState: on the same device, its value keeps changing and then switching back to the original. My current iOS version is 26.1. I upgraded my iOS from version 18.6.2 to 26.1. What could be the potential reasons for this issue? { NSError *error; BOOL success = YES; char *eds = nil; int edslen = 0; LAContext *context = [[LAContext alloc] init]; // test if we can evaluate the policy, this test will tell us if Touch ID is available and enrolled // success = [context canEvaluatePolicy: LAPolicyDeviceOwnerAuthenticationWithBiometrics error:&error]; if (SystemVersion > 9.3) { // test if we can evaluate the policy, this test will tell us if Touch ID is available and enrolled success = [context canEvaluatePolicy: LAPolicyDeviceOwnerAuthentication error:&error]; } else{ // test if we can evaluate the policy, this test will tell us if Touch ID is available and enrolled success = [context canEvaluatePolicy: LAPolicyDeviceOwnerAuthenticationWithBiometrics error:&error]; } if (success) { if (@available(iOS 18.0, *)) { NSData *stateHash = nil; if ([context respondsToSelector:@selector(domainState)]) { stateHash = [[context performSelector:@selector(domainState)] performSelector:@selector(stateHash)]; }else{ stateHash = [context evaluatedPolicyDomainState]; } eds = (char *)stateHash.bytes; edslen = (int)stateHash.length; } else { eds = (char *)[[context evaluatedPolicyDomainState] bytes]; edslen = (int)[[context evaluatedPolicyDomainState] length]; } CC_SHA256(eds, edslen, uviOut); *poutlen = CC_SHA256_DIGEST_LENGTH; } else { *poutlen = 32; gm_memset(uviOut, 0x01, 32); } }
6
0
1.3k
Jan ’26
Mark the iOS app content not to be backed up when doing unencrypted backup in iTunes
Hi,is there an option to mark the file or folder or item stored in user defaults ... not to be backed up when doing unencrypted backup in iTunes?We are developing iOS app that contains sensitive data. But even if we enable Data Protection for the iOS app it can be backed up on mac unencrypted using iTunes. Is there a way to allow backing up content only if the backup is encrypted?
2
0
1.8k
Oct ’25
deviceOwnerAuthenticationWithCompanion evaluation not working as expected
In one of my apps I would like to find out if users have their device set up to authenticate with their Apple Watch. According to the documentation (https://aninterestingwebsite.com/documentation/localauthentication/lapolicy/deviceownerauthenticationwithcompanion) this would be done by evaluating the LAPolicy like this: var error: NSError? var canEvaluateCompanion = false if #available(iOS 18.0, *) { canEvaluateCompanion = context.canEvaluatePolicy(.deviceOwnerAuthenticationWithCompanion, error: &error) } But when I run this on my iPhone 16 Pro (iOS 18.5) with a paired Apple Watch SE 2nd Gen (watchOS 11.5) it always returns false and the error is -1000 "No companion device available". But authentication with my watch is definitely enabled, because I regularly unlock my phone with the watch. Other evaluations of using biometrics just works as expected. Anything that I am missing?
2
0
211
Jul ’25
What is the code signing trust level?
In some crashlog files, there are additional pieces of information related to codesigning. I can understand what most of themcorresponds to (ID, TeamID, Flags, Validation Category). But there is one I have some doubt about: Trust Level. As far as I can tell (or at least what Google and other search engines say), this is an unsigned 32 bit integer that defines the trust level with -1 being untrusted, 0, being basically an Apple executable and other potential bigger values corresponding to App Store binaries, Developer ID signature, etc. Yet, I'm not able to find a corresponding detailed documentation about this on Apple's developer website. I also had a look at the LightweightCodeRequirements "include" file and there does not seem to be such a field available. [Q] Is there any official documentation listing the different values for this trust level value and providing a clear description of what it corresponds to?
4
0
341
Jul ’25
Information on macOS tracking/updating of CRLs
With Let's Encrypt having completely dropped support for OCSP recently [1], I wanted to ask if macOS has a means of keeping up to date with their CRLs and if so, roughly how often this occurs? I first observed an issue where a revoked-certificate test site, "revoked.badssl.com" (cert signed by Let's Encrypt), was not getting blocked on any browser, when a revocation policy was set up using the SecPolicyCreateRevocation API, in tandem with the kSecRevocationUseAnyAvailableMethod and kSecRevocationPreferCRL flags. After further investigation, I noticed that even on a fresh install of macOS, Safari does not block this test website, while Chrome and Firefox (usually) do, due to its revoked certificate. Chrome and Firefox both have their own means of dealing with CRLs, while I assume Safari uses the system Keychain and APIs. I checked cert info for the site here [2]. It was issued on 2025-07-01 20:00 and revoked an hour later. [1] https://letsencrypt.org/2024/12/05/ending-ocsp/ [2] https://www.ssllabs.com/ssltest/analyze.html?d=revoked.badssl.com
2
0
422
Sep ’25
Device identifier for framework
I want iOS device identifier for a framework that is used in multiple vendor's apps. I'm developing a framework to control a peripheral. The framework has to send unique information to register the device with the peripheral. My naive idea was to use IdentifierForVendor. But this API provides the device identifier for the same vendor's apps, not the framework. (The framework will be used by multiple vendors.) Is there a usable device identifier for the framework, regardless of app vendor? Please tell me any solution.
Replies
1
Boosts
0
Views
95
Activity
Jul ’25
Unsandboxed app can't modify other app
I work for Brave, a browser with ~80M users. We want to introduce a new system for automatic updates called Omaha 4 (O4). It's the same system that powers automatic updates in Chrome. O4 runs as a separate application on users' systems. For Chrome, this works as follows: An app called GoogleUpdater.app regularly checks for updates in the background. When a new version is found, then GoogleUpdater.app installs it into Chrome's installation directory /Applications/Google Chrome.app. But consider what this means: A separate application, GoogleUpdater.app, is able to modify Google Chrome.app. This is especially surprising because, for example, the built-in Terminal.app is not able to modify Google Chrome.app. Here's how you can check this for yourself: (Re-)install Chrome with its DMG installer. Run the following command in Terminal: mkdir /Applications/Google\ Chrome.app/test. This works. Undo the command: rm -rf /Applications/Google\ Chrome.app/test Start Chrome and close it again. mkdir /Applications/Google\ Chrome.app/test now fails with "Operation not permitted". (These steps assume that Terminal does not have Full Disk Access and System Integrity Protection is enabled.) In other words, once Chrome was started at least once, another application (Terminal in this case) is no longer allowed to modify it. But at the same time, GoogleUpdater.app is able to modify Chrome. It regularly applies updates to the browser. For each update, this process begins with an mkdir call similarly to the one shown above. How is this possible? What is it in macOS that lets GoogleUpdater.app modify Chrome, but not another app such as Terminal? Note that Terminal is not sandboxed. I've checked that it's not related to codesigning or notarization issues. In our case, the main application (Brave) and the updater (BraveUpdater) are signed and notarized with the same certificate and have equivalent requirements, entitlements and provisioning profiles as Chrome and GoogleUpdater. The error that shows up in the Console for the disallowed mkdir call is: kernel (Sandbox) System Policy: mkdir(8917) deny(1) file-write-create /Applications/Google Chrome.app/foo (It's a similar error when BraveUpdater tries to install a new version into /Applications/Brave Browser.app.) The error goes away when I disable System Integrity Protection. But of course, we cannot ask users to do that. Any help would be greatly appreciated.
Replies
4
Boosts
0
Views
312
Activity
May ’25
ASPasswordCredential Returns a Blank Password with Apple Password App
Using the simplified sign-in with tvOS and a third party password manager, I receive a complete ASPasswordCredential, and I can easily log into my app. When I do the same thing but with Apple's password manager as the source, I receive an ASPasswordCredential that includes the email address, but the password is an empty string. I have tried deleting the credentials from Apple Passwords and regenerating them with a new login to the app's website. I have tried restarting my iPhone. Is this the expected behavior? How should I be getting a password from Apple's Password app with an ASAuthorizationPasswordRequest?
Replies
2
Boosts
0
Views
300
Activity
Aug ’25
Help with Entitlements for Keychain Access
Hi everyone, I’m working an Objective-C lib that performs Keychain operations, such as generating cryptographic keys and signing data. The lib will be used by my team in a Java program for macOS via JNI. When working with the traditional file-based Keychain (i.e., without access control flags), everything works smoothly, no issues at all. However, as soon as I try to generate a key using access control flags SecAccessControlCreateWithFlags, the Data Protection Keychain returns error -34018 (errSecMissingEntitlement) during SecKeyCreateRandomKey. This behavior is expected. To address this, I attempted to codesign my native dynamic library (.dylib) with an entitlement plist specifying various combinations of: keychain-access-groups com.apple.security.keychain etc. with: My Apple Development certificate Developer ID Application certificate Apple Distribution certificate None of these combinations made a difference, the error persists. I’d love to clarify: Is it supported to access Data Protection Keychain / Secure Enclave Keys in this type of use case? If so, what exact entitlements does macOS expect when calling SecKeyCreateRandomKey from a native library? I’d really appreciate any guidance or clarification. Thanks in advance! Best regards, Neil
Replies
1
Boosts
0
Views
421
Activity
Jul ’25
API: SecPKCS12Import; error code: -25264; error message: MAC verification failed during PKCS12 import (wrong password?)
Problem Statement: Pre-requisite is to generate a PKCS#12 file using openssl 3.x or above. Note: I have created a sample cert, but unable to upload it to this thread. Let me know if there is a different way I can upload. When trying to import a p12 certificate (generated using openssl 3.x) using SecPKCS12Import on MacOS (tried on Ventura, Sonoma, Sequoia). It is failing with the error code: -25264 and error message: MAC verification failed during PKCS12 import (wrong password?). I have tried importing in multiple ways through, Security Framework API (SecPKCS12Import) CLI (security import &lt;cert_name&gt; -k ~/Library/Keychains/login.keychain -P "&lt;password&gt;”) Drag and drop in to the Keychain Application All of them fail to import the p12 cert. RCA: The issues seems to be due to the difference in the MAC algorithm. The MAC algorithm used in the modern certs (by OpenSSL3 is SHA-256) which is not supported by the APPLE’s Security Framework. The keychain seems to be expecting the MAC algorithm to be SHA-1. Workaround: The current workaround is to convert the modern p12 cert to a legacy format (using openssl legacy provider which uses openssl 1.1.x consisting of insecure algorithms) which the SecPKCS12Import API understands. I have created a sample code using references from another similar thread (https://aninterestingwebsite.com/forums/thread/723242) from 2023. The steps to compile and execute the sample is mentioned in the same file. PFA the sample code by the name “pkcs12_modern_to_legacy_converter.cpp”. Also PFA a sample certificate which will help reproduce the issue by the name “modern_certificate.p12” whose password is “export”. Questions: Is there a fix on this issue? If yes, pls guide me through it; else, is it expected to be fixed in the future releases? Is there a different way to import the p12 cert which is resistant to the issue? This issue also poses a security concerns on using outdated cryptographic algorithms. Kindly share your thoughts. pkcs12_modern_to_legacy_converter.cpp
Replies
11
Boosts
0
Views
511
Activity
Apr ’25
How can I determine if an application is using an external device
For security reasons, my application needs to prohibit external devices. If it is determined that the current phone is connected to any external devices, including non MFI authenticated devices, the app will exit. Please tell me how to do it? Thanks for your help.
Replies
1
Boosts
0
Views
187
Activity
May ’25
How to get the macOS user login Password requirements in Swift
Hi Team, How can we fetch the macOS password requirement(for setting a new password) that are inforce during login for users? Is there a way to get this info in swift programming?
Replies
1
Boosts
0
Views
742
Activity
Jul ’25
ASWebAuthenticationSession + Universal Links Callback Issue
Problem Description: In our App, When we launch the web login part using ASWebAuthentication + Universal Links with callback scheme as "https", we are not receiving callback. Note: We are using "SwiftUIWebAuthentication" Swift Package Manager to display page in ASWebAuth. But when we use custom url scheme instead of Universal link, app able to receive call back every time. We use ".onOpenURL" to receive universal link callback scheme.
Replies
4
Boosts
0
Views
266
Activity
Jul ’25
Apply MacOS OS updated without password prompt
Hello, I am currently researching to develop an application where I want to apply the MacOS updates without the password prompt shown to the users. I did some research on this and understand that an MDM solution can apply these patches without user intervention. Are there any other ways we can achieve this? Any leads are much appreciated.
Replies
3
Boosts
0
Views
311
Activity
Jul ’25
ASWebAuthenticationSession password autofill iOS 18.5 broken
I have been implementing an sdk for authenticating a user. I have noticed that on iOS 18.5, whether using SFSafariViewController, or the sdk (built on ASWebAuthenticationSession), password autofill does not work. I have confirmed it works on a different device running iOS 18.0.1. Are there any work arounds for this at this time? Specifically for ASWebAuthenticationSession?
Replies
2
Boosts
0
Views
257
Activity
Jul ’25
Will Security Layer Affect AASA File Accessibility?
Hi, I’d like to confirm something regarding the hosting of the apple-app-site-association (AASA) file. We have a server that publicly hosts the AASA file and is accessible globally. However, this server sits behind an additional security layer (a security server/reverse proxy). My question is: Will this security layer affect Apple’s ability to access and validate the AASA file for Universal Links or App Clips? Are there specific requirements (e.g. headers, redirects, TLS versions, etc.) that we need to ensure the security server does not block or modify? Any guidance or best practices would be appreciated.
Replies
1
Boosts
0
Views
323
Activity
Jul ’25
Validating Signature Of XPC Process
Quinn, you've often suggested that to validate the other side of an XPC connection, we should use the audit token. But that's not available from the XPC object, whereas the PID is. So everyone uses the PID. While looking for something completely unrelated, I found this in the SecCode.h file OSStatus SecCodeCreateWithXPCMessage(xpc_object_t message, SecCSFlags flags, SecCodeRef * __nonnull CF_RETURNS_RETAINED target); Would this be the preferred way to do this now? At least from 11.0 and up. Like I said, I was looking for something completely unrelated and found this and don't have the cycles right now to try it. But it looks promising from the description and I wanted to check in with you about it in case you can say yes or no before I get a chance to test it. Thanks
Replies
8
Boosts
0
Views
8.3k
Activity
Aug ’25
Error when using SecItemAdd with kSecReturnPersistentRef and user presence kSecAttrAccessControl
I'm trying to add a generic password to the keychain and get back the persistent ID for it, and give it .userPresence access control. Unfortunately, if I include that, I get paramError back from SecItemAdd. Here's the code: @discardableResult func set(username: String, hostname: String?, password: String, comment: String? = nil) throws -> PasswordEntry { // Delete any existing matching password… if let existing = try? getEntry(forUsername: username, hostname: hostname) { try deletePassword(withID: existing.id) } // Store the new password… var label = username if let hostname { label = label + "@" + hostname } var item: [String: Any] = [ kSecClass as String : kSecClassGenericPassword, kSecAttrDescription as String : "TermPass Password", kSecAttrGeneric as String : self.bundleID.data(using: .utf8)!, kSecAttrLabel as String : label, kSecAttrAccount as String : username, kSecValueData as String : password.data(using: .utf8)!, kSecReturnData as String : true, kSecReturnPersistentRef as String: true, ] if self.synchronizable { item[kSecAttrSynchronizable as String] = kCFBooleanTrue! } if let hostname { item[kSecAttrService as String] = hostname } if let comment { item[kSecAttrComment as String] = comment } // Apply access control to require the user to prove presence when // retrieving this password… var error: Unmanaged<CFError>? guard let accessControl = SecAccessControlCreateWithFlags(nil, kSecAttrAccessibleWhenUnlockedThisDeviceOnly, .userPresence, &error) else { let cfError = error!.takeUnretainedValue() as Error throw cfError } item[kSecAttrAccessControl as String] = accessControl item[kSecAttrAccessible as String] = kSecAttrAccessibleWhenUnlockedThisDeviceOnly var result: AnyObject! let status = SecItemAdd(item as CFDictionary, &result) try Errors.throwIfError(osstatus: status) load() guard let secItem = result as? [String : Any], let persistentRef = secItem[kSecValuePersistentRef as String] as? Data else { throw Errors.malformedItem } let entry = PasswordEntry(id: persistentRef, username: username, hostname: hostname, password: password, comment: comment) return entry } (Note that I also tried it omitting kSecAttrAccessible, but it had no effect.) This code works fine if I omit setting kSecAttrAccessControl. Any ideas? TIA!
Replies
6
Boosts
0
Views
175
Activity
Jul ’25
Prevent batch operations on Secure Enclave
Hi, I have an application that uses SecureEnclave keys to protect secrets. By passing an LAContext object to the Secure Enclave operations, authentication state can be preserved across decrypt operations, and you do not need to re-authenticate for doing different operations. However, for security reasons, I would like to avoid that it is possible to do operations in batch with certain keys generated by the Secure Enclave, by any application. This would avoid malicious binaries to batch-extract all the secrets that are protected by a key from my Secure Enclave, and force to re-authenticate on every operation. Is there a way to prevent batch operations without re-authenticating for Secure Enclave keys? thanks, Remko
Replies
1
Boosts
0
Views
610
Activity
Jan ’26
evaluatedPolicyDomainState
Hi Apple Developers, I'm having a problem with evaluatedPolicyDomainState: on the same device, its value keeps changing and then switching back to the original. My current iOS version is 26.1. I upgraded my iOS from version 18.6.2 to 26.1. What could be the potential reasons for this issue? { NSError *error; BOOL success = YES; char *eds = nil; int edslen = 0; LAContext *context = [[LAContext alloc] init]; // test if we can evaluate the policy, this test will tell us if Touch ID is available and enrolled // success = [context canEvaluatePolicy: LAPolicyDeviceOwnerAuthenticationWithBiometrics error:&error]; if (SystemVersion > 9.3) { // test if we can evaluate the policy, this test will tell us if Touch ID is available and enrolled success = [context canEvaluatePolicy: LAPolicyDeviceOwnerAuthentication error:&error]; } else{ // test if we can evaluate the policy, this test will tell us if Touch ID is available and enrolled success = [context canEvaluatePolicy: LAPolicyDeviceOwnerAuthenticationWithBiometrics error:&error]; } if (success) { if (@available(iOS 18.0, *)) { NSData *stateHash = nil; if ([context respondsToSelector:@selector(domainState)]) { stateHash = [[context performSelector:@selector(domainState)] performSelector:@selector(stateHash)]; }else{ stateHash = [context evaluatedPolicyDomainState]; } eds = (char *)stateHash.bytes; edslen = (int)stateHash.length; } else { eds = (char *)[[context evaluatedPolicyDomainState] bytes]; edslen = (int)[[context evaluatedPolicyDomainState] length]; } CC_SHA256(eds, edslen, uviOut); *poutlen = CC_SHA256_DIGEST_LENGTH; } else { *poutlen = 32; gm_memset(uviOut, 0x01, 32); } }
Replies
6
Boosts
0
Views
1.3k
Activity
Jan ’26
Mark the iOS app content not to be backed up when doing unencrypted backup in iTunes
Hi,is there an option to mark the file or folder or item stored in user defaults ... not to be backed up when doing unencrypted backup in iTunes?We are developing iOS app that contains sensitive data. But even if we enable Data Protection for the iOS app it can be backed up on mac unencrypted using iTunes. Is there a way to allow backing up content only if the backup is encrypted?
Replies
2
Boosts
0
Views
1.8k
Activity
Oct ’25
deviceOwnerAuthenticationWithCompanion evaluation not working as expected
In one of my apps I would like to find out if users have their device set up to authenticate with their Apple Watch. According to the documentation (https://aninterestingwebsite.com/documentation/localauthentication/lapolicy/deviceownerauthenticationwithcompanion) this would be done by evaluating the LAPolicy like this: var error: NSError? var canEvaluateCompanion = false if #available(iOS 18.0, *) { canEvaluateCompanion = context.canEvaluatePolicy(.deviceOwnerAuthenticationWithCompanion, error: &error) } But when I run this on my iPhone 16 Pro (iOS 18.5) with a paired Apple Watch SE 2nd Gen (watchOS 11.5) it always returns false and the error is -1000 "No companion device available". But authentication with my watch is definitely enabled, because I regularly unlock my phone with the watch. Other evaluations of using biometrics just works as expected. Anything that I am missing?
Replies
2
Boosts
0
Views
211
Activity
Jul ’25
Cannot find developer mode in iPhone 16
Cannot find developer mode in iPhone 16. Please help me resolve this
Replies
1
Boosts
0
Views
1.7k
Activity
Jul ’25
What is the code signing trust level?
In some crashlog files, there are additional pieces of information related to codesigning. I can understand what most of themcorresponds to (ID, TeamID, Flags, Validation Category). But there is one I have some doubt about: Trust Level. As far as I can tell (or at least what Google and other search engines say), this is an unsigned 32 bit integer that defines the trust level with -1 being untrusted, 0, being basically an Apple executable and other potential bigger values corresponding to App Store binaries, Developer ID signature, etc. Yet, I'm not able to find a corresponding detailed documentation about this on Apple's developer website. I also had a look at the LightweightCodeRequirements "include" file and there does not seem to be such a field available. [Q] Is there any official documentation listing the different values for this trust level value and providing a clear description of what it corresponds to?
Replies
4
Boosts
0
Views
341
Activity
Jul ’25
Information on macOS tracking/updating of CRLs
With Let's Encrypt having completely dropped support for OCSP recently [1], I wanted to ask if macOS has a means of keeping up to date with their CRLs and if so, roughly how often this occurs? I first observed an issue where a revoked-certificate test site, "revoked.badssl.com" (cert signed by Let's Encrypt), was not getting blocked on any browser, when a revocation policy was set up using the SecPolicyCreateRevocation API, in tandem with the kSecRevocationUseAnyAvailableMethod and kSecRevocationPreferCRL flags. After further investigation, I noticed that even on a fresh install of macOS, Safari does not block this test website, while Chrome and Firefox (usually) do, due to its revoked certificate. Chrome and Firefox both have their own means of dealing with CRLs, while I assume Safari uses the system Keychain and APIs. I checked cert info for the site here [2]. It was issued on 2025-07-01 20:00 and revoked an hour later. [1] https://letsencrypt.org/2024/12/05/ending-ocsp/ [2] https://www.ssllabs.com/ssltest/analyze.html?d=revoked.badssl.com
Replies
2
Boosts
0
Views
422
Activity
Sep ’25