Hi everyone, I’m seeing recurring internal AVFoundation camera logs on iOS 26.2 and I’m trying to understand whether this is expected behavior or a regression in the capture pipeline. These logs appear shortly after starting an AVCaptureSession, while video frames are being delivered, and also when the camera is stopped or the capture session is torn down. <<<< FigXPCUtilities >>>> signalled err=-17281 at <>:302 <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:569) - (err=-17281) Even in this clean, minimal setup, the same logs appear on iOS 26.2 The exact same logic did not produce these logs on iOS 18.x. To rule out issues caused by my own code, GPT created a minimal SwiftUI example from scratch. My primary interest is to perform real-time processing on the video frames delivered by the camera (via AVCaptureVideoDataOutput), for tasks such as analysis, computer vision, or custom frame handling, while simultaneously displaying the live preview. Thanks in advance for any insight. Example Code

Hello everyone, I’m looking for more detailed information regarding UVC (USB Video Class) over MFi within the Apple ecosystem and would appreciate some clarification. I’m interested in developing (or interfacing with) an accessory that transmits video over USB using the UVC standard, and I’d like to better understand how this works within the MFi (Made for iPhone) program. Here are my main questions: 1. Do iOS devices provide native support for UVC over USB-C or Lightning within the MFi framework? 2. Are there any specific firmware or authentication requirements when the accessory is MFi-certified? 3. Does UVC support depend solely on the hardware interface (USB-C vs Lightning), or are there additional software-level requirements? 4. Is there any official documentation outlining the recommended flow for implementing UVC-based video capture accessories on iOS? From what I understand, USB-C iPads appear to offer more direct support for standard UVC devices, but it’s not entirely clear how this integrates with the MFi ecosystem with iOS, especially for commercial product development. If anyone has gone through this process or can point me to relevant technical documentation, I would greatly appreciate the guidance. Thank you!

Dear Apple Developer Team, On iOS 26, the contents of PDF pages appear to be swapped. Could you please advise if there is a workaround or a planned fix for this issue? Steps to Reproduce: Download the attached PDF on iOS 26. Open the PDF in the Files app. Tap the PDF to view it in Quick Look. Navigate to page 5. Expected Result: The page number displayed at the bottom should be 5. Actual Result: The page number displayed at the bottom is 4. Issue: This is not limited to page 5—multiple page contents appear to be swapped. I have also submitted feedback via Feedback Assistant (FB20743531) on October 20. Best regards, Yoshihito Suezawa

Hi everyone! I’ve been working with AVFoundation and trying to use the AVMetricEventStreamPublisher to discover media performance metrics, as described in the Apple documentation. https://aninterestingwebsite.com/cn/videos/play/wwdc2024/10113/?time=508 However, when following the example code, I’m not getting the expected results. The performance metrics for both audio and video don’t seem to be captured properly. Has anyone successfully used this example code? If so, could you share your experience or any solutions you’ve found? Any tips or insights would be greatly appreciated. Thanks in advance! Ps. the example code: AVPlayerItem *item = ... AVMetricEventStream *eventStream = [AVMetricEventStream eventStream]; id subscriber = [[MyMetricSubscriber alloc] init]; [eventStream setSubscriber:subscriber queue:mySerialQueue] [eventStream subscribeToMetricEvent:[AVMetricPlayerItemLikelyToKeepUpEvent class]]; [eventStream subscribeToMetricEvent:[AVMetricPlayerItemPlaybackSummaryEvent class]]; [eventStream addPublisher:item];

I'm using the SwiftUI Photos Picker to select videos from the users Photos library and then opening the video using the PhotosPickerItem. I'm looking for a way to allow the user to open the same video on their other devices as the app uses SwiftData and CloudKit to provide access to a recently watched list of videos. The URL from the PhotosPickerItem appears to be device specific and so I was looking to see if I can use the itemIdentifier and then the init that takes the itemIdentifier to create the PhotosPickerItem on the other devices. The itemIdentifier however is always nil and so wouldn't be able to be used in this way. Is there an alternative approach whereby the users can open a video using a PhotosPickerItem and that item would be viewable on their other devices with an item identifier or a URL that is device agnostic. This approach should also not involve copying the video into other storage as it would simply expand the use of the users iCloud storage, providing a less than ideal user experience. If the user has opened the video from their Photos library, there should be a way to allow the same user (e.g. same Apple ID), to use the same app on another device to open the video again.

The introduction of PHBackgroundResourceUploadExtension is a welcome addition in iOS 26.1. I wonder however, how to attach a debugger and actually get the system to call the process() method of the extension. I tried to run the extension both inside photos app (and also the main app for testing), but when I take a photo or add photos to the library (saving), the process() method does never get called. Any hints would be appreciated to debug the PHBackgroundResourceUploadExtension during development.

I believe this should work: CFMutableDictionaryRef attrs = CFDictionaryCreateMutable(kCFAllocatorDefault, 0, &kCFTypeDictionaryKeyCallBacks, &kCFTypeDictionaryValueCallBacks); CFDictionaryAddValue(attrs, kCVImageBufferColorPrimariesKey, kCVImageBufferColorPrimaries_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferTransferFunctionKey, kCVImageBufferTransferFunction_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferYCbCrMatrixKey, kCVImageBufferYCbCrMatrix_ITU_R_709_2); CVPixelBufferRef pixelBuffer = NULL; CVPixelBufferCreate(kCFAllocatorDefault, width, height, kCVPixelFormatType_32ARGB, attrs, &pixelBuffer); assert(CFDictionaryGetCount(CVBufferGetAttachments(pixelBuffer, kCVAttachmentMode_ShouldPropagate)) > 0); But that last assert fails, so it appears the color info does not get attached. kCVImageBufferColorPrimariesKey and the others are not one of the keys listed under BufferAttributeKeys, but I think they're supposed to be allowed because they're listed by CMVideoFormatDescriptionGetExtensionKeysCommonWithImageBuffers(). I'm hoping that putting the color matrix info in there will control how AVAssetWriter converts the RGB to YCbCr.

I have the main app that saves preferences to UserDefaults.standard. So I have this one preference that the user is able to toggle - isRawOn UserDefaults.standard.set(self.isRawOn, forKey: "isRawOn") Now, I have LockedCameraCaptureExtension which is required know if that above setting on or off during launch. Also if it's toggled within the extension, the main app should know about it on the next launch. The main app and the extension runs on separate containers and the preferences are not shared due to privacy reasons. Apple mentions of using appContext of CameraCaptureIntent, but not sure how above scenario is possible through that....unless I am missing something. Apple Reference What I have for CameraCaptureIntent: @available(iOS 18, *) struct LaunchMyAppControlIntent: CameraCaptureIntent { typealias AppContext = MyAppContext static let title: LocalizedStringResource = "LaunchMyAppControlIntent" static let description = IntentDescription("Capture photos with MyApp.") @MainActor func perform() async throws -> some IntentResult { .result() } }

Hi, our CourAudio server plugin utilizes the SystemConfiguration.framework to store and restore specific shared system wide settings. While our application can authenticate to utilize the SystemConfiguration.framework to gain write access to the shared configuration settings the CoreAudio server plugin obviously can't have any user interaction and therefor does not authenticate. Is it possible to authenticate the CoreAudio server plugin to gain write permissions? Are there any entitlements or other means that would allow this? Thanks!

I'm using an AVAudioConverter object to decode an OPUS stream for VoIP. The decoding itself works well, however, whenever the stream stalls (no more audio packet is available to decode because of network instability) this can be heard in crackling / abrupt stop in decoded audio. OPUS can mitigate this by indicating packet loss by passing a null pointer in the C-library to int opus_decode_float (OpusDecoder * st, const unsigned char * data, opus_int32 len, float * pcm, int frame_size, int decode_fec), see https://opus-codec.org/docs/opus_api-1.2/group__opus__decoder.html#ga9c554b8c0214e24733a299fe53bb3bd2. However, with AVAudioConverter using Swift I'm constructing an AVAudioCompressedBuffer like so:         let compressedBuffer = AVAudioCompressedBuffer(             format: VoiceEncoder.Constants.networkFormat,             packetCapacity: 1,             maximumPacketSize: data.count         )         compressedBuffer.byteLength = UInt32(data.count)         compressedBuffer.packetCount = 1   compressedBuffer.packetDescriptions! .pointee.mDataByteSize = UInt32(data.count)         data.copyBytes(             to: compressedBuffer.data .assumingMemoryBound(to: UInt8.self),             count: data.count         ) where data: Data contains the raw OPUS frame to be decoded. How can I specify data loss in this context and cause the AVAudioConverter to output PCM data whenever no more input data is available? More context: I'm specifying the audio format like this:         static let frameSize: UInt32 = 960         static let sampleRate: Float64 = 48000.0         static var networkFormatStreamDescription = AudioStreamBasicDescription(             mSampleRate: sampleRate,             mFormatID: kAudioFormatOpus,             mFormatFlags: 0,             mBytesPerPacket: 0,             mFramesPerPacket: frameSize,             mBytesPerFrame: 0,             mChannelsPerFrame: 1,             mBitsPerChannel: 0,             mReserved: 0         )         static let networkFormat = AVAudioFormat( streamDescription: &networkFormatStreamDescription )! I've tried 1) setting byteLength and packetCount to zero and 2) returning nil but setting .haveData in the AVAudioConverterInputBlock I'm using with no success.

We're distributing a virtual camera with our app that does not profit in the slightest from automatically applied system video effects both to the video going in (physical camera device) or out (virtual camera device). I'm aware of setting NSCameraReactionEffectGesturesEnabledDefault in Info.plist and determining active video effects via AVCaptureDevice API. Those are obviously crutches, because having to tell users to go look for and click around in menu bar apps is the opposite of a great UX. To make our product's video output more deterministic, I'm looking for a way to tell the CMIO subsystem that our virtual camera does not support any of the system video effects. I'm seeing properties like AVCaptureDevice.Format.isPortraitEffectSupported and AVCaptureDevice.Format.isStudioLightSupported whose documentation refers to the format's ability to support these effects. Since we're setting a CMFormatDescription via CMIOExtensionStreamSource.formats I was hoping to find something in the extensions, but wasn't successful so far. Can this be done?

Is it possible to stream video from a UVC (USB Video Class) camera on an iPhone 15? If so, are there any specific hardware or software requirements to enable this functionality?

I noticed that while playing back the same tracks via MusicKit on different OSes I get different results regarding the audio files being streamed. Playing back a lossless file with 24Bit 48kHz and watching the Console for RemotePlayerService I get: on iPadOS: Lossless; groupID: audio-alac-stereo-48000-24; bitDepth: 24-bit; sampleRate: 48khz; codec: alac; channels: 2; layout: Stereo; on macOS: Creating AudioQueue with format:'paac', framesPerPacket:1024, sampleRate:44100 While the iPad looks perfect, the Mac does not. Is there a way to fix this issue on macOS. BTW: I switched the Audio-Midi Settings before, after and while the macOS App was lunched. I also switched to different output devices. I wasn't able to change the bad audio-output on the mac. I tested this under Sequoia 15.5 and Tahoe beta 1, Xcode 16.4 and 26 beta 1. The AudioVariants of the Album/Tracks are .dolbyAtmos, .lossless, .lossyStereo Apple Music displays Lossless 24 Bit/48 kHz ALAC when clicking on the playercontroll icon on macOS I hope there are only some missing or misconfigured properties to get macOS up to par. Thanks :-)

With older iOS versions, when user taps Mute/Volume button on AVPLayerViewController to unmute, the system restores the sound volume of device to the level when user muted before. On iOS 26, when user taps unmute button on screen, the volume starts from 0 (not restore). (but it still restores if user unmutes by pressing physical volume buttons). As I understand, the Volume bar/button on AVPlayerViewController is MPVolumeView, and I can not control it. So this is a feature of the system. But I got complaints that this is a bug. I did not find documents that describe this change of Mute button behavior. I need some bases to explain this situation. Thank you.

Hi, I'm a fan of the gallery in vision pro which has video as well as still photography but I'm wondering if Apple has considered adding the projected media tags to heic so that we can go that next step from Spatial photos to Immersive photos. I have a device that can give me 12k x 6k fisheye images in HDR, but it can't do it at a framerate or resolution that's good enough for video, so I want to cut my losses and show off immersive photos instead. Is there something Apple is already working on for APMP stills or should I create my own app that reads metadata inside a HEIC that I infer in a similar way to the demo "ProjectedMediaConversion" is doing for Video. It would be great to have 180VR photos, which could show as Spatial in a gallery view, but going immersive would half-surround you instead of floating in the blurred view. I think that would be a pretty amazing effect.

Hi, I'm sending an API request to: https://api.music.apple.com/v1/me/library/playlists?limit=$limit&offset=$offset To list all of the users library playlists, however the resulting objects do not contain the playlist artwork in the JSON. I've tried adding the extend and include attributes as well but to no avail. A partial example of the response: {"id": PLAYLIST_ID, "type": "library-playlists", "href": "/v1/me/library/playlists/PLAYLIST_ID", "attributes": {"lastModifiedDate": "2024-09-18T20:18:24Z", "canEdit": true, "name": "Afro Party Anthems", "isPublic": false, "description": {"standard": "Definitive African party starters"}, "hasCatalog": false, "dateAdded": "2022-03-10T18:30:56Z", "playParams": {"id": PLAYLIST_ID, "kind": "playlist", "isLibrary": true}}, "relationships": {"catalog": {"href": "/v1/me/library/playlists/PLAYLIST_ID/catalog", "data": []}}} Is there a way to get the artwork URL without sending a request for each playlist? And if not can this be fixed?

Description: I have identified a specific issue when recording acoustic guitar and other instruments on the iPhone 17 Pro Max using native applications (Voice Memos, Camera). The recordings contain an unnatural metallic resonance (ringing artifacts) that should not be present. Testing and Methodology: Hardware Verification: Initially, I suspected a hardware defect in the audio chip or microphone. However, extensive testing with third-party software suggests this is likely a software-level issue. AudioShare Test: I conducted a test using the AudioShare app in "Measurement Mode" (which bypasses standard iOS system-wide audio processing). In this mode, the audio remains perfectly clean, and the metallic ringing disappears entirely. Conclusion: The issue is rooted in the DSP (Digital Signal Processing) algorithms that iOS applies for noise suppression or voice enhancement. These algorithms appear to misinterpret the high-frequency overtones of acoustic instruments as background noise and attempt to "filter" them, resulting in audible digital artifacts. Comparison Results: This issue has not been observed on devices from other brands or on older iPhone models (preliminary tests suggest older versions handle this better). Notably, the problem persists even in GarageBand, as the app still utilizes certain system-level processing layers. Proposed Solution: I suggest adding a "Raw Audio" or "Instrument Mode" toggle within the Microphone/Audio settings for native apps. This mode should disable aggressive DSP processing, similar to how the AVAudioSession.Mode.measurement works in specialized apps. Attachments: I am attaching 4 archives, including a final "Measurement Mode" folder with comparative samples (Measurement Mode vs. Standard Mode). The artifacts are most prominent when monitored through headphones.

Hello, We have Video Stream app. It has HLS VOD Content. We supply 1080p, 4K Contents to users. Users were watching 1080p content before tvOS 26. Users can not watch 1080p content anymore when they update to tvOS 26. We have not changed anything at HLS playlist side and application version. This problem only occurs on Apple TV 4th Gen (A1625) tvOS 26 version. There is no problem with newer Apple TV devices. Would you help to resolve problem? Thanks in advance

Hi there, Can anyone tell me how to possibly get approved as an Apple News Publisher in 2025? We attempted in 2024, but received this message from Apple support: "Thank you for your interest in Apple News. At this time, we're not accepting new applications." When I inquired further, I got this second response: "Apple News is no longer accepting unsolicited applications. To learn more about Apple News requirements, visit the Apple News support page. If you have any feedback, please use this form to send us your comments. Keep in mind that while we read all feedback, we are unable to respond to each submission individually." My questions are: Is this still the case? (Especially when you are a legit local news outlet) Is there a link to apply as a news publisher? I don't seem to have that option at all. Thanks for any feedback.

Hi everyone, We're encountering an unexpected issue with our iPhone-only camera app: 👉 TimeMark - Photo Proof https://apps.apple.com/us/app/timemark-photo-proof/id6446071834 Problem Description: Our app uses a full-screen camera view via AVCaptureSession. In some cases reported by users, the camera fails immediately upon app launch, and we receive this interruption reason: AVCaptureSessionInterruptionReasonVideoDeviceNotAvailableWithMultipleForegroundApps According to the Apple documentation https://aninterestingwebsite.com/documentation/avfoundation/avcapturesession/interruptionreason/videodevicenotavailablewithmultipleforegroundapps?language=objc , this interruption typically occurs when the app is running in a multi-app layout such as Slide Over, Split View, or Picture in Picture — all of which are iPad-only features. However, this issue is being reported on iPhones, and our app does not support iPad at all. Also noted in the documentation: "Given your present AVCaptureSession configuration, the session may only be run if your app occupies the full screen." Additional Context: The issue occurs immediately on app launch, before the user can interact with the camera. We don’t enable multitaskingCameraAccessEnabled. We are 100% sure this is happening on iPhone, not iPad. It’s hard to reproduce; users report it happening sporadically. Locally, we tried playing Picture-in-Picture videos (e.g., Safari/YouTube) before launching our app, but we could not reproduce the issue. Questions: Why is this interruption reason occurring on iPhone, which doesn’t officially support Slide Over or Split View? Could this be caused by some system-level multitasking or resource contention (e.g., Picture in Picture from FaceTime or Safari)? Would enabling multitaskingCameraAccessEnabled help prevent this issue on iPhone, even though it's designed for iPad? Enabling multitaskingCameraAccessEnabled seems to require enabling UIBackgroundModes → voip. Would adding this background mode cause any App Store review risk or rejection if our app doesn't actually use VoIP functionality? Any help, insight, or suggestions would be greatly appreciated. Thanks in advance!