Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

I’m running the iOS 26.2 Public Beta update and my album artwork is missing from the music app (I’m not using Apple Music). I use google to get my album artwork. Do I need to wait for a new update?

Hello. My app uses AVAudioRecorder to generate recording files, which are consistently only 4kb in size. Most users generate audio files normally, with only a few users experiencing this phenomenon occasionally. After uninstalling and installing the app, it will work normally, but it will reappear after a period of time. I have compared that the problematic audio files generated each time are fixed and cannot be played. Added the audioRecorderDidFinishRecording proxy method, which shows that the recording was completed normally. The user also reported that the recording is normal, but there is a problem with the generated file. How should I handle this issue? Look forward to your reply. - (void)startRecordWithOrderID:(NSString *)orderID { AVAudioSession *audioSession = [AVAudioSession sharedInstance]; [audioSession setCategory:AVAudioSessionCategoryRecord error:nil]; [audioSession setActive:YES error:nil]; NSMutableDictionary *settings = [[NSMutableDictionary alloc] init]; [settings setObject:[NSNumber numberWithFloat: 8000.0] forKey:AVSampleRateKey]; [settings setObject:[NSNumber numberWithInt: kAudioFormatLinearPCM] forKey:AVFormatIDKey]; [settings setObject:[NSNumber numberWithInt:16] forKey:AVLinearPCMBitDepthKey]; [settings setObject:[NSNumber numberWithInt: 1] forKey:AVNumberOfChannelsKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsBigEndianKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsFloatKey]; NSString *path = [WDUtility createDirInDocument:@"audios" withOrderID:orderID withPathExtension:@"wav"]; NSURL *tmpFile = [NSURL fileURLWithPath:path]; recorder = [[AVAudioRecorder alloc] initWithURL:tmpFile settings:settings error:nil]; [recorder setDelegate:self]; [recorder prepareToRecord]; [recorder record]; }

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

I’m facing a strange audio routing issue that seems specific to iPhone 14 Pro / Pro Max. I’m using LiveKit (WebRTC) in a React Native app, which uses AVAudioSession internally for audio capture (VoIP / call-style usage). 🔍 What’s happening: I’m using an external USB microphone. On these devices: iPhone 11 → ✅ USB mic works iPhone 13 → ✅ USB mic works iPhone 17 Pro → ✅ USB mic works iPhone 14 Pro Max → ❌ USB mic does NOT work On iPhone 14 Pro Max: The same USB mic: ✅ Works in Voice Memos ✅ Works in Instagram Live ❌ Does NOT appear as an input option in my app ❌ Does NOT work in WhatsApp / Instagram calls Also: In my app on iPhone 14 Pro Max, iOS does not show the audio input selector UI On iPhone 17 Pro, the same app and same build does show the selector and the USB mic works ⚙️ My audio session config ( LiveKit ): await AudioSession.setAppleAudioConfiguration({ audioCategory: 'playAndRecord', audioMode: 'default', audioCategoryOptions: ['allowBluetooth', 'defaultToSpeaker'], }); await AudioSession.startAudioSession(); ❓ My questions: Is this a known limitation or behavior specific to iPhone 14 Pro / Pro Max? Does iPhone 14 Pro have different audio routing rules for call / VoIP mode compared to other devices? Why does the same USB mic work in recording apps (Voice Memos, Instagram Live) but not in call-style apps (LiveKit, WhatsApp, Instagram call)? Is there any documented difference in AVAudioSession behavior on iPhone 14 Pro regarding external USB audio inputs?

New to iOS development and I've been trying to make heads or tails of the documentation. I know there is a difference between the data fields returned from songs from the user library and from the category, but whenever I search on the apple site I can't find a list of each. For example, Im trying to get the releaseDate of a song in my library, but it seems I'll have to cross-query either the catalog entry for the using song.catalogID or the song.irsc but when I try to use them I can't find a cross reference between the two. I'm totally turned around. Also trying to determine if a song in my library has been favorited or not? isFavorited (or something similar) doesn't seem to be a thing. Using this code and trying to find a way to display a solid star if the song has been favorited or an empty one if it's not. Seems like a basic request but I can't find anything on how to do it. I've searched docs, googled, tried. Does apple want us to query the user's Favorited Songs playlist or something? How do I know which playlist that is? I know isFavorited isn't a thing, just using it here so you can see what my intension is: HStack(spacing: 10) { Image(systemName: song.isFavorited ? "star.fill" : "star") .foregroundColor(song.isFavorited ? .yellow : .gray) Image(systemName: "magnifyingglass") }

Hello, I've discovered a buffer initialization bug in AVAudioUnitSampler that happens when loading presets with multiple zones referencing different regions in the same audio file (monolith/concatenated samples approach). Almost all zones output silence (i.e. zeros) at the beginning of playback instead of starting with actual audio data. The Problem Setup: Single audio file (monolith) containing multiple concatenated samples Multiple zones in an .aupreset, each with different sample start and sample end values pointing to different regions of the same file All zones load successfully without errors Expected Behavior: All zones should play their respective audio regions immediately from the first sample. Actual Behavior: Last zone in the zone list: Works perfectly - plays audio immediately All other zones: Output [0, 0, 0, 0, ..., _audio_data] instead of [real_audio_data] The number of zeros varies from event to event for each zone. It can be a couple of samples (<30) up to several buffers. After the initial zeros, the correct audio plays normally, so there is no shift in audio playback, just missing samples at the beginning. Minimal Reproduction 1. Create Test Monolith Audio File Create a single Wav file with 3 concatenated 1-second samples (44.1kHz): Sample 1: frames 0-44099 (constant amplitude 0.3) Sample 2: frames 44100-88199 (constant amplitude 0.6) Sample 3: frames 88200-132299 (constant amplitude 0.9) 2. Create Test Preset Create an .aupreset with 3 zones all referencing the same file: Pseudo code <Zone array> <zone 1> start : 0, end: 44099, note: 60, waveform: ref_to_monolith.wav; <zone 2> start sample: 44100, note: 62, end sample: 88199, waveform: ref_to_monolith.wav; <zone 3> start sample: 88200, note: 64, end sample: 132299, waveform: ref_to_monolith.wav; </Zone array> 3. Load and Test // Load preset into AVAudioUnitSampler let sampler = AVAudioUnitSampler() try sampler.loadAudioFiles(from: presetURL) // Play each zone (MIDI notes C4=60, D4=62, E4=64) sampler.startNote(60, withVelocity: 64, onChannel: 0) // Zone 1 sampler.startNote(62, withVelocity: 64, onChannel: 0) // Zone 2 sampler.startNote(64, withVelocity: 64, onChannel: 0) // Zone 3 4. Observed Result Zone 1 (C4): [0, 0, 0, ..., 0.3, 0.3, 0.3] ❌ Zeros at beginning Zone 2 (D4): [0, 0, 0, ..., 0.6, 0.6, 0.6] ❌ Zeros at beginning Zone 3 (E4): [0.9, 0.9, 0.9, ...] ✅ Works correctly (last zone) What I've Extensively Tested What DOES Work Separate files per zone: Each zone references its own individual audio file All zones play correctly without zeros Problem: Not viable for iOS apps with 500+ sample libraries due to file handle limitations What DOESN'T Work (All Tested) 1. Different Audio Formats: CAF (Float32 PCM, Int16 PCM, both interleaved and non-interleaved) M4A (AAC compressed) WAV (uncompressed) SF2 (SoundFont2) Bug persists across all formats 2. CAF Region Chunks: Created CAF files with embedded region chunks defining zone boundaries Set zones with no sampleStart/sampleEnd in preset (nil values) AVAudioUnitSampler completely ignores CAF region metadata Bug persists 3. Unique Waveform IDs: Gave each zone a unique waveform ID (268435456, 268435457, 268435458) Each ID has its own file reference entry (all pointing to same physical file) Hypothesized this might trigger separate buffer initialization Bug persists - no improvement 4. Different Sample Rates: Tested: 44.1kHz, 48kHz, 96kHz Bug occurs at all sample rates 5. Mono vs Stereo: Bug occurs with both mono and stereo files Environment macOS: Sonoma 14.x (tested across multiple minor versions) iOS: Tested on iOS 17.x with same results Xcode: 16.x Frameworks: AVFoundation, AudioToolbox Reproducibility: 100% reproducible with setup described above Impact & Use Case This bug severely impacts professional music applications that need: Small file sizes: Monolith files allow sharing compressed audio data (AAC/M4A) iOS file handle limits: Opening 400+ individual sample files is not viable on iOS Performance: Single file loading is much faster than hundreds of individual files Standard industry practice: Monolith/concatenated samples are used by EXS24, Kontakt, and most professional samplers Current Impact: Cannot use monolith files with AVAudioUnitSampler on iOS Forced to choose between: unusable audio (zeros at start) OR hitting iOS file limits No viable workaround exists Root Cause Hypothesis The bug appears to be in AVAudioUnitSampler's internal buffer initialization when: Multiple zones share the same source audio file Each zone specifies different sampleStart/sampleEnd offsets Key observation: The last zone in the zone array always works correctly. This is NOT related to: File permissions or security-scoped resources (separate files work fine) Audio codec issues (happens with uncompressed PCM too) Preset parsing (preset loads correctly, all zones are valid) Questions Is this a known issue? I couldn't find any documentation, bug reports, or discussions about this. Is there ANY workaround that allows monolith files to work with AVAudioUnitSampler? Alternative APIs? Is there a different API or approach for iOS that properly supports monolith sample files?

Since MacOS 26 Apple Music has inconsitent drops to the Quality of some Tracks indiscrimantly. I don't know if others Expereinced it. It doesn't happen on the Speakers or connected via Bluetooth, but the AUX I/O has it quite often. It is more noticable on Headphones with 48kHz and higher Frequency Bandwidth. Here is the FB18062589

Is it possible to find IDR frame (CMSampleBuffer) in AVAsset h264 video file?

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 We're using AVAudioPlayer to play a sound when a button is tapped. In our use case, this button can be tapped very frequently — roughly every 0.1 to 0.2 seconds. Each tap triggers the following function: var audioPlayer: AVAudioPlayer? func soundPlay(resource: String, type: String){ guard let path = Bundle.main.path(forResource: resource, ofType: type) else { return } do { audioPlayer = try AVAudioPlayer(contentsOf: URL(fileURLWithPath: path)) audioPlayer!.delegate = self try audioSession.setCategory(.playback) } catch { return } self.audioPlayer!.play() } The issue is that under high-frequency tapping (especially around 0.1–0.15s intervals), the app occasionally crashes. The crash does not occur every time, but it happens randomly — sometimes within 30 seconds, within 1 minute, or even 3 minutes of continuous tapping. Interestingly, adding a delay of 0.2 seconds between button taps seems to prevent the crash entirely. Delays shorter than 0.2 seconds (e.g.,0.15s,0.18s) still result in occasional crashes. My questions are: **Is this expected behavior from AVAudioPlayer or AVAudioSession? Could this be a known issue or a limitation in AVFoundation? Is there any documentation or guidance on handling frequent sound playback safely?** Any insights or recommendations on how to handle rapid, repeated audio playback more reliably would be appreciated.

My app utilizes background audio to play music files. I have the audio background mode enabled and I initialize the AVAudioSession in playback mode with the mixWithOthers option. And it usually works great while the app is backgrounded. I listen for audio interruptions as well as route changes and I am able to handle them appropriately and I can usually resume my background audio no problem. I discovered an issue while connected to CarPlay though. Roughly 50% of the time when I disconnect from a phone call while connected to CarPlay I get the following error after calling the play() method of my AVAudioPlayer instance: "ATAudioSessionClientImpl.mm:281 activation failed. status = 561015905" If I instead try to start a new audio session I get a similar error: Error Domain=NSOSStatusErrorDomain Code=561015905 "Session activation failed" UserInfo={NSLocalizedDescription=Session activation failed} Like I said, this isn't reproducible 100% of the time and is so far only seen while connected to CarPlay. I don't think Im forgetting so additional capability or plist setting, but if anyone has any clues it would be greatly appreciated. Otherwise this is likely just a bug that I need to report to Apple. One very important note, and reason I believe it's just a bug, is that while I was testing I found that other music apps like Spotify will also fail to resume their audio at the same time my app fails. Another important detail is that when it works successfully I receive the audio session interruption ended notification, and when it doesn't work I only receive a route configuration change or route override notification. From there I am able to still successfully granted background time to execute code, but my call to resume audio fails with the above mentioned error codes.

Hi, On macOS I used to open MP3 and MP4 files with ExtAudioFile. For a few years it doesn't work anymore. So I decided to try different macOS API using the AudioFileID of AudioToolbox framework. I decided to write a test: https://gist.github.com/joelkraehemann/7f5b241b52ca38c3a765c138fb647588 It fails right here: AudioFileOpenWithCallbacks() By telling OSStatus error 1954115647, which means kAudioFileUnsupportedFileTypeError. The filename was set to an MP4 file: ~/Music/test.mp4 Howto fix this? regards, Joël

I'm trying to use the new Speech framework for streaming transcription on macOS 26.3, and I can reproduce a failure with SpeechAnalyzer.start(inputSequence:). What is working: SpeechAnalyzer + SpeechTranscriber offline path using start(inputAudioFile:finishAfterFile:) same Spanish WAV file transcribes successfully and returns a coherent final result What is not working: SpeechAnalyzer + SpeechTranscriber stream path using start(inputSequence:) same WAV, replayed as AnalyzerInput(buffer:bufferStartTime:) fails once replay starts with: _GenericObjCError domain=Foundation._GenericObjCError code=0 detail=nilError I also tried: DictationTranscriber instead of SpeechTranscriber no realtime pacing during replay Both still fail in stream mode with the same error. So this does not currently look like a ScreenCaptureKit issue or a Python integration issue. I reduced it to a pure Swift CLI repro. Environment: macOS 26.3 (25D122) Xcode 26.3 Swift 6.2.4 Apple Silicon Mac Has anyone here gotten SpeechAnalyzer.start(inputSequence:) working reliably on macOS 26.x? If so, I'd be interested in any workaround or any detail that differs from the obvious setup: prepareToAnalyze(in:) bestAvailableAudioFormat(...) AnalyzerInput(buffer:bufferStartTime:) replaying a known-good WAV in chunks I already filed Feedback Assistant: FB22149971

In Instruments, I'm seeing "Zero Time Stamp" events in the "Audio Server" lane. What does that mean?

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

Recently, after the update of 26.3 Mac OS (Tahoe), the ordering of my music app has been horrible at best - music disappearing, tracks not aligning with albums (even if the albums are different years). It's created quite a problem, because the disappearing tracks issue seems to be replicating to iOS devices as well (although track numbering and album association seem to be stable). Has anyone else heard of this issue?

My app encountered problems when trying to open an x86 audioUnit v2 on a Silicon Mac (although Rosetta is installed). There seems to be a XPC connection issue with the AUHostingService that I don't know how to fix. I observed other host apps opening the same plugins without problem, so there is probably something wrong or incompatible in my codes. I noticed that: The issue occurs whether or not the app is sandboxed. The issue does no longer occur when the app itself runs under Rosetta. There is no error reported by CoreAudio during allocation and initialization of the audio unit. The first notified errors appears when the unit calls AudioUnitRender from the rendering callback. With most x86 plugins, the error is on first call: kAudioUnitErr_RenderTimeout and on any subsequent call: kAudioComponentErr_InstanceInvalidated On the UI side, when the Cocoa View is loaded, it appears shortly, then disappears immediately leaving its superview empty. With another x86 plugin, the Cocoa View is loaded normally, but CoreAudio still emits kAudioUnitErr_NoConnection from AudioUnitRender, whether the view has been loaded or not, and the plugin produces no sound. I also find these messages in the console (printed in that order): CLIENT ERROR: RemoteAUv2ViewController does not override - and thus cannot react to catastrophic errors beyond logging them AUAudioUnit_XPC.mm:641 Crashed AU possible component description: aumu/Helm/Tyte My app uses the AUv2 API and I suspect that working with the AUv3 API would spare me these problems. However, considering how my audio system is built (audio units are wrapped into C++ classes and most connections between units are managed on the fly from the rendering callback), it would be a lot of work to convert, and I’m even not sure that all I do with the AUv2 API would be possible with the AUv3 API. I could possibly find an intermediate solution, but in the immediate future I'm looking for the simplest and fastest possible fix. If I cannot find better, I see two fallback options: In this part of the doc: “Beginning with macOS 11, the system loads audio units into a separate process that depends on the architecture or host preference”, does “host preference” means that it would be possible to disable the “out of process” behavior, for example from the app entitlements or info.plist? Otherwise, as a last resort, I could completely disable the use of x86 audioUnits when my app runs under ARM64, for at least making things cleaner. But the Audio Component API doesn’t give any info about the plugin architecture, how could I found it? Any tip or idea about this issue will be much appreciated. Thanks in advance!

I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅

I wrote a Swift macOS app to control a PCI audio device. The code switches between the default output and input channels. As soon as I launch the Audio-Midi Setup utility, channel switching stops working. The driver properties allow switching, but the system doesn't respond. I have to delete the contents of /Library/Preferences/Audio and reset Core Audio. What am I missing? func setDefaultChannelsOutput() { guard let deviceID = getDeviceIDByName(deviceName: "PCI-424") else { return } let selectedIndex = DefaultChannelsOutput.indexOfSelectedItem if selectedIndex < 0 || selectedIndex >= 24 { return } let channel1 = UInt32(selectedIndex * 2 + 1) let channel2 = UInt32(selectedIndex * 2 + 2) var channels: [UInt32] = [channel1, channel2] var propertyAddress = AudioObjectPropertyAddress( mSelector: kAudioDevicePropertyPreferredChannelsForStereo, mScope: kAudioDevicePropertyScopeOutput, mElement: kAudioObjectPropertyElementWildcard ) let dataSize = UInt32(MemoryLayout<UInt32>.size * channels.count) let status = AudioObjectSetPropertyData(deviceID, &propertyAddress, 0, nil, dataSize, &channels) if status != noErr { print("Error setting default output channels: \(status)") } }