AVAudioFormat has no Swift concurrency annotations but the documentation states "Instances of this class are immutable." This made me always assume it was safe to pass AVAudioFormat instances around. Is this the case? If so can it be marked as Sendable? Am I missing something?

Hi, I am creating an app that can include videos or images in it's data. While @Attribute(.externalStorage) helps with images, with AVAssets I actually would like access to the URL behind that data. (as it would be stupid to load and then save the data again just to have a URL) One key component is to keep all of this clean enough so that I can use (private) CloudKit syncing with the resulting model. All the best Christoph

Your draft looks great! Here's a refined version with the iOS 17 comparison emphasized and slightly better flow: Hi Apple Engineers and fellow developers, I'm experiencing a critical regression with ShazamKit's background operation on iOS 18. ShazamKit's SHManagedSession stops identifying songs in the background after approximately 20 seconds on iOS 18, while the exact same code works perfectly on iOS 17. The behavior is consistent: the app works perfectly in the foreground, but when backgrounded or device is locked, it initially works for about 20 seconds then stops identifying new songs. The microphone indicator remains active suggesting audio access is maintained, but ShazamKit doesn't send identified songs in the background until you open the app again. Detection immediately resumes when bringing the app to foreground. My technical setup uses SHManagedSession for continuous matching with background modes properly configured in Info.plist including audio mode, and Background App Refresh enabled. I've tested this on physical devices running iOS 18.0 through 18.5 with the same results across all versions. The exact same code running on iOS 17 devices works flawlessly in the background. To reproduce: initialize SHManagedSession and start matching, begin song identification in foreground, background the app or lock device, play different songs which are initially detected for about 20 seconds, then after the timeout period new songs are no longer identified until you bring the app to foreground. This regression has impacted my production app as users who rely on continuous background music identification are experiencing a broken feature. I submitted this as Feedback ID FB15255903 last September with no solution so far. I've created a minimal demo project that reproduces this issue: https://github.com/tfmart/ShazamKitBackground Has anyone else experienced this ShazamKit background regression on iOS 18? Are there any known workarounds or alternative approaches? Given the time this issue has persisted, could we please get acknowledgment of this regression, expected timeline for a fix, or any recommended workarounds? Testing environment is Xcode 16.0+ on iOS 18.0-18.5 across multiple physical device models. Any guidance would be greatly appreciated.

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

Hi, On macOS I used to open MP3 and MP4 files with ExtAudioFile. For a few years it doesn't work anymore. So I decided to try different macOS API using the AudioFileID of AudioToolbox framework. I decided to write a test: https://gist.github.com/joelkraehemann/7f5b241b52ca38c3a765c138fb647588 It fails right here: AudioFileOpenWithCallbacks() By telling OSStatus error 1954115647, which means kAudioFileUnsupportedFileTypeError. The filename was set to an MP4 file: ~/Music/test.mp4 Howto fix this? regards, Joël

There appears to be no method of going forward or backwards in Get Info in the Music application,

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback, using ApplicationMusicPlayer. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

I am building an app where I am using AudioRecordingIntent to start audio recording from shortcuts / Action button etc. Whenever I set that up, I notice that I get an error - Unknown NSError Live Activity start failed: The operation couldn’t be completed. Target is not foreground I explicitly try to start the live activity and then start the audio recording and that's when I see this error. How can I make this work? I am unable to find any examples.

My app want Converting iphone12 HDR Video to SDR，to edit。 follow the doc Apple-HDR-Convert. My code setting the pixBuffAttributes        [pixBuffAttributes setObject:(id)(kCVImageBufferYCbCrMatrix_ITU_R_709_2) forKey:(id)kCVImageBufferYCbCrMatrixKey];       [pixBuffAttributes setObject:(id)(kCVImageBufferColorPrimaries_ITU_R_709_2) forKey:(id)kCVImageBufferColorPrimariesKey];       [pixBuffAttributes setObject:(id)kCVImageBufferTransferFunction_ITU_R_709_2 forKey:(id)kCVImageBufferTransferFunctionKey];       playerItemOutput = [[AVPlayerItemVideoOutput alloc] initWithPixelBufferAttributes:pixBuffAttributes]; but I get the playerItemOutput's output buffer   CFTypeRef colorAttachments = CVBufferGetAttachment(pixelBuffer, kCVImageBufferYCbCrMatrixKey, NULL);     CFTypeRef colorPrimaries = CVBufferGetAttachment(pixelBuffer, kCVImageBufferColorPrimariesKey, NULL);     CFTypeRef colorTransFunc = CVBufferGetAttachment(pixelBuffer, kCVImageBufferTransferFunctionKey, NULL);      NSLog(@"colorAttachments = %@", colorAttachments);     NSLog(@"colorPrimaries = %@", colorPrimaries);     NSLog(@"colorTransFunc = %@", colorTransFunc); log output: colorAttachments = ITU_R_2020 colorPrimaries = ITU_R_2020 colorTransFunc = ITU_R_2100_HLG pixBuffAttributes setting output format invalid，please help！

I am developing an app with transcription and I am exploring ways to improve the transcription from the SpeechAnalyzer/Transcriber for technical terms. SFSpeech... recognition had the capability of being augmented by contextualStrings. Does something similar exist for SpeechAnalyzer/Transcriber? If so please point me towards the documentation and any sample code that may exist for this. If there are other options, please let me know.

Hi all, I've developed an audio DSP application in C++ using AudioToolbox and CoreAudio on MacOS 14.4.1 with Xcode 15. I use an AudioQueue for input and another for output. This works great. I'm now adding real-time audio analysis eg spectral analysis. I want this to run independently of my audio processing so it can not interfere with audio playback. Taps on AudioQueues seem to be a good way of doing this... Since the analytics won't modify the audio data, I am using a Siphon Tap by setting the AudioQueueProcessingTapFlags to kAudioQueueProcessingTap_PreEffects | kAudioQueueProcessingTap_Siphon; This works fine on my output queue. However, on my input queue the Tap callback is called once and then a EXC_BAD_ACCESS occurs - screen shot below. NB: I believe that a callback should only call AudioQueueProcessingTapGetSourceAudio when not using a Siphon, so I don't call it. Relevant code: AudioQueueProcessingTapCallback tap_callback) { // Makes an audio tap for a queue void * tap_data_ptr = NULL; AudioQueueProcessingTapFlags tap_flags = kAudioQueueProcessingTap_PostEffects | kAudioQueueProcessingTap_Siphon; uint32_t max_frames = 0; AudioStreamBasicDescription asbd; AudioQueueProcessingTapRef tap_ref; OSStatus status = AudioQueueProcessingTapNew(queue_ref, tap_callback, tap_data_ptr, tap_flags, &max_frames, &asbd, &tap_ref); if (status != noErr) printf("Error while making Tap\n"); else printf("Successfully made tap\n"); } void tapper(void * tap_data, AudioQueueProcessingTapRef tap_ref, uint32_t number_of_frames_in, AudioTimeStamp * ts_ptr, AudioQueueProcessingTapFlags * tap_flags_ptr, uint32_t * number_of_frames_out_ptr, AudioBufferList * buf_list) { // Callback function for audio queue tap printf("Tap callback"); }``` Image of exception stack provided by Xcode: ![]("https://aninterestingwebsite.com/forums/content/attachment/27479e8d-a118-459b-aa2d-7e30528910e3" "title=Screenshot 2025-06-14 at 1.29.14 PM.png;width=932;height=562") What have I missed? Appreciate any help you learned folks may be able to provide. Best, Geoff.

Using an iPhone Pro 12 running iOS 26.0.1, with AirPods Pro 3. Camera app does capture video with what seems to be "Studio Quality Recording". Am trying to replicate that SQR with my own Camera like app, and while I can pull audio in from the APP3 mic, and my video capture app is recording a 48,000Hz high-bitrate video, the audio still sounds non-SQR. I'm seeing bluetoothA2DP , bluetoothLE , bluetoothHFP as portType, and not sure if SQR depends on one of those? Is there sample code demonstrating a SQR capture? Nevermind video and camera, just audio even? Also, I don't understand what SQR is doing between the APP3 and the iPhone. What codec is that? What bitrate is that? If I capture video using Capture and inspect the audio stream I see mono 74.14 kbit/s MPEG-4 AAC, 48000 Hz. But I assume that's been recompressed and not really giving me any insight into the APP3 H2 transmission?

I have an iPadOS M-processor application with two different running configurations. In config1, the shared AVAudioSession is configured for .videoChat mode using the built-in microphone. The input/output nodes of the AVAudioEngine are configured with voice processing enabled. The built-in mic is formatted for 1 channel at 48KHz. In config2, the shared AVAudioSession is configured for .measurement mode using an external USB microphone. The input/output nodes of the AVAudioEngine are configured with voice processing disabled. The external mic is formatted for 2 channels at 44.1KHz I've written a configuration manager designed to safely switch between these two configurations. It works by stopping AVAudioEngine and detaching all but the input and output nodes, updating the shared audio session for the desired mic and sample-rates, and setting the appropriate state for voice processing to either true or false as required by the configuration. Finally the new audio graph is constructed by attaching appropriate nodes, connecting them, and re-starting AVAudioEngine I'm experiencing what I believe is a race-condition between switching voice processing on or off and then trying to re-build and start the new audio graph. Even though notifications, which are dumped to the console indicate that my requested input and sample-rate settings are in place, I crash when trying to start the audio engine because the sample-rate is wrong. Investigating further it looks like the switch from remote I/O to voice-processing I/O or vice-versa has not yet actually completed. I introduced a 100ms second delay and that seems to help but is obviously not a reliable way to build software that must work consistently. How can I make sure that what are apparently asynchronous configuration changes to the shared audio session and the input/output nodes have completed before I go on? I tried using route change notifications from the shared AVAudioSession but these lie. They say my preferred mic input and sample-rate setting is in place but when I dump the AVAudioEngine graph to the debugger console, I still see the wrong sample rate assigned to the input/output nodes. Also these are the wrong AU nodes. That is, VPIO is still in place when RIO should be, or vice-versa. How can I make the switch reliable without arbitrary time delays? Is my configuration manager approach appropriate (question for Apple engineers)?

Hello, I'm working on a MusicKit based SwiftUI app. I've integrated AirPlay using the AVRoutePickerView like so: struct UIKitAirPlayPickerView: UIViewRepresentable { func makeUIView(context: Context) -> AVRoutePickerView { let routePickerView = AVRoutePickerView() routePickerView.prioritizesVideoDevices = false return routePickerView } func updateUIView(_ uiView: AVRoutePickerView, context: Context) {} } The AirPlay menu appears as expected, and selecting an AirPlay device functions as expected. I'm currently sending audio from my app to a HomePod. However, the state of the AVRoutePickerView does not reflect the playback state. There is no cover art and it says "Not Playing". When my device is locked, my lock screen shows the album art, metadata and AirPlay routing as expected. My app uses the ApplicationMusicPlayer however I encounter the same behavior using the SystemMusicPlayer. Any guidance on how to troubleshoot this? Is there any other way to integrate the system AirPlay picker into my app, or is this my only option? Thank you for reading.

A recent WWDC session "Learn about Apple Immersive Video technologies" showed a Apple Spatial Audio Format Panner plugin for Pro Tools. The presenter stated that it's available on a per-user license. Where can users access this?

After update,WeChat voice chatting no sounds, please help

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

I have both apple devices, AirPods Pro 3 is up to date and Ultra 3 is on watch os 26.1 latest public beta. Each morning when I would go on my mindfulness app and start a meditation or listen to Apple Music on my watch and AirPods Pro 3, it will play for a few seconds then disconnects. My bluetooth settings on my watch says my AirPods is connected to my watch. I also have removed the tick about connecting automatically to iPhone on the AirPods setting in my iPhone. To fix this I invariably turn off my Apple Watch Ultra 3 and turn it on again. Then the connection becomes stable. I am not sure why I have to do this each morning. It is frustrating. I am not sure why this fix does not last long? Is there something wrong with my AirPods? Has anyone encountered this before?