Hello, I have an existing AUv3 instrument plugin. In the plug in, users can access files (audio files, song projects) via a UIDocumentPickerViewController In Logic Pro, (and some other hosts, but not all), the document picker is unable to receive touches, while a keyboard case is attached to the iPad. Removing the case (this is an Apple brand iPad case) allows the interactions to resume and allows me to pick files in the usual way. One of my users reports this non-responsive behavior occurs even after disconnecting their keyboard. I have fiddled with entitlements all day, and have determined that is not the issue, since the keyboard disconnection appears to fix it every time for me. Here is my, very boilerplate, presentation code : guard let type = UTType("com.my.type") else { return } let fileBrowser = UIDocumentPickerViewController(forOpeningContentTypes: [type]) fileBrowser.overrideUserInterfaceStyle = .dark fileBrowser.delegate = self fileBrowser.directoryURL = myFileFolderURL() self.present(fileBrowser, animated: true) {

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

After upgrading to iOS 18.4, I'm no longer able to establish an AirPlay v1 connection to an audio system. The symptom is that the AirPlay route picker just spins when trying to connect to an audio system. It eventually gives up. I tested this on an iPhone 14, connecting to a HomePod, AirPort express, AppleTV and a Wiim Pro. If I try connecting with AirPlay v2, ex: using Apple Music, the connection succeeds and audio can be played. I'm the developer of an app that plays audio over AirPlay while also recording. My app has to use AirPlay v1 because AvAudioSession doesn't allow the policy .longFormAudio when the category is .playAndRecord. This issue is a real pain as it means my app is suddenly broken for many thousands of users. Is anyone else seeing this issue? Any suggestions for a workaround?

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

Hello Apple Developer Community, I am seeking clarification on the intended display behavior of HLS audio tracks within the iOS 26 (or current beta) native player, specifically concerning the NAME and LANGUAGE attributes of the EXT-X-MEDIA tag. In our HLS manifests, we define alternative audio tracks using EXT-X-MEDIA tags, like so: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-1",DEFAULT=YES,AUTOSELECT=YES,URI="audio_ja.m3u8" #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio",LANGUAGE="ja",NAME="AUDIO-2",URI="audio_en.m3u8" Our observation is that when an audio track is selected and its name is displayed in the native iOS media controls (e.g., Control Center or within a full-screen video player's UI), the value specified in the NAME attribute ("AUDIO-1", "AUDIO-2") does not seem to be used. Instead, the display appears to derive from the LANGUAGE attribute ("ja", "en"), often showing the system's localized string for that language (e.g., "Japanese", "English"). We would like to understand the official or intended behavior regarding this. Is it the expected behavior for the iOS native player to prioritize the LANGUAGE attribute (or its localized equivalent) over the NAME attribute for displaying the selected audio track's label? If this is the intended design, what is the recommended best practice for developers who wish to present a custom, human-readable name for audio tracks (beyond the standard language name) in the native iOS UI? Are there any specific AVPlayer properties or AVMediaSelectionOption considerations that would allow more granular control over this display, or is this entirely managed by the system based on the LANGUAGE attribute? Any insights or official guidance on this behavior in iOS 26 (and potentially previous versions) would be greatly appreciated. Thank you for your time and assistance.

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

Hi, I am getting into a trap. Please check stack-trace, howto fix this? regards, Joël stack-trace with ExtAudioFileWrite

I'm getting this error when I launch my application on the iPhone 14 Pro via Xcode. Everything builds OK. I"m using the audio kit plugin and Sound Pipe Audiokit. The error starts as soon as I start the app and will carry on repeatedly. I have background processing turned on as I'd like the sounds to play when the phone is locked via the headphones. I can't find anything online about this error. None of my catches are printing anything in the logs either. So I don't know if this is just something that pops up repeatedly or whether there is something fundamentally wrong. private func setupAudioSession() { do { let session = AVAudioSession.sharedInstance() try session.setCategory(.playback, mode: .default, options: [.mixWithOthers]) try session.setActive(true, options: .notifyOthersOnDeactivation) } catch { errorMessage = "Failed to set up audio session: (error.localizedDescription)" print(errorMessage ?? "") } } // MARK: - Background Task Handling private func setupBackgroundTaskHandling() { // Handle app entering background notificationObservers.append( NotificationCenter.default.addObserver( forName: UIApplication.didEnterBackgroundNotification, object: nil, queue: .main, using: { [weak self] _ in // Safely unwrap self guard let self = self else { return } self.handleBackgroundTransition() } ) ) I'm not sure if this is the code causing the issue. Any help would be gratefully appreciated. This is my first app I'm working on .

[Note: this issue was happening on a main testing device, and after testing the same code on other devices, this issue is only happening on 1 out of 4 devices] We are successfully getting a MusicCatalogResourceResponse for every song ID where we make the MusicCatalogResourceRequest. We are able to display the song title, artist name, and album artwork for each Song in the response. However - when we go to play the song, there are some songs that play, and several songs that do not play. For the songs that don't play, the console shows “Failed to prepareToPlay error=<MPMusicPlayerControllerErrorDomain.6 "Failed to prepare to play" {}>” let musicPlayer = ApplicationMusicPlayer.shared func playSong(_ song: Song) { musicPlayer.queue = [song] Task { try await musicPlayer.prepareToPlay() try await musicPlayer.play() } Is there anything else we can investigate about what may be causing specific song IDs not to play on this specific device? Even if we remove line 6 musicPlayer.prepareToPlay() we still see the same console error when running playSong with the Songs that don't work. It is always the same song IDs that we can play and always the same song IDs that we cannot get to play, even trying them across different projects with different bundle identifiers. We can tap to play a song that works, and it starts playing immediately. Then tap a song that doesn't work, and nothing happens. Then back to a song that works. It's consistent which songs succeed and fail on this device. Perhaps there is an issue specific to this very iPad when it comes to certain specific songs, but we'd like to be confident that an app relying on MusicKit will be able to play songs that have been successfully loaded with a MusicCatalogResourceResponse. Thanks for any help or suggestions about what we may be able to investigate further on the device or what we should consider when launching an app that expects anyone with Apple Music to be able to listen to any of the songs loaded by the app. Specific iPad details: iPad Pro (12.9-inch) (6th generation) running iPadOS 26.4 Beta Two of the song IDs that won't play on this iPad (even though we can access and display their album artwork and all other information): 943204000 and 1441164805

Among Japanese end users, audio issues during screen recording—primarily in game applications—have become a topic of discussion. We have confirmed that the trigger for this issue is highly likely to be related to changes to IOBufferDuration. When using setPreferredIOBufferDuration and the IOBufferDuration is set to a value smaller than the default, audio problems occur in the recorded screen capture video. Audio playback is performed using AudioUnit (RemoteIO). https://aninterestingwebsite.com/documentation/avfaudio/avaudiosession/setpreferrediobufferduration(_:)?language=objc This issue was not observed on iOS 18, and it appears to have started occurring after upgrading to iOS 26. We provide an audio middleware solution, and we had incorporated changes to IOBufferDuration into our product to achieve low-latency audio playback. As a result, developers using our product as well as their end users are being affected by this issue. We kindly request that this issue be investigated and addressed in a future update. “This document has been translated by AI. The original text is included below for reference.” 日本のエンドユーザー間で主にゲームアプリケーションにおける画面収録時の音声の問題が話題になっています。 こちらの症状のトリガーが、IOBufferDurationの変更によるものである可能性が高いことを確認しました。 setPreferredIOBufferDurationを使用し、IOBufferDurationがデフォルトより小さい状態の時、画面収録された動画の音声に問題が発生することをしています。 音声の再生にはAudioUnit(RemoteIO)を使用しています。 https://aninterestingwebsite.com/documentation/avfaudio/avaudiosession/setpreferrediobufferduration(_:)?language=objc iOS 18ではこのような問題は確認されておらず、iOS26になってから問題が発生しているようです。 私たちはオーディオミドルウェアを提供しており、低遅延の再生のためにIOBufferDurationの変更を製品に組み込んでいました。 そのため、弊社製品をご利用いただいている開発者およびエンドユーザーの皆様がこの不具合の影響を受けています。 こちらの不具合の調査及び修正対応を検討いただけますでしょうか。

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅

I have a flutter iOS app that has some simple sound FX for button clicks, swipes, etc. In simulator and on real device the sound works fine, but when i upload the app to testflight (and App store) the sound FX don't play. When I upload the app to my phone via xcode I am using the release profile so I don't see what the difference could be. I have also gone through the archive that i uploaded and verified that the sound files are indeed there. I have other flutter apps that use sound but non since the iOS 26 update. I've tried 3 different flutter sound libraries and all face the same issue. Wondering if anyone else is seeing this issue or if I'm missing a simple permission or something that has changed recently? Thanks in advanced

I'm experiencing a significant limitation with MusicKit's Dolby Atmos implementation on macOS and would appreciate clarification on whether this is intended behavior or if there are solutions available. When streaming Dolby Atmos content through MusicKit's ApplicationMusicPlayer, the output is limited to 2-channel stereo, even when: Audio MIDI Setup is configured for 7.1.4 (12-channel) output The same tracks play in full multichannel through the native Apple Music app Dolby Atmos is set to "Automatic" in Apple Music preferences Please let me know if there is anyway to enable this. If not, is this documented anywhere? Thanks!

Hello, I’m new here. I'm developing an iOS app and I’d like to know whether it is possible to detect if a phone call is being recorded by another app running in the background. I’ve already reviewed the documentation for CallKit and AVAudioSession, but I couldn’t find anything related. My expectation was that iOS might provide some callback or API to indicate if a call is being recorded (third-party apps), but so far I haven’t found a way. My questions are: Does iOS expose any API to detect if a call is being recorded? If not, is there any indirect, Apple's policy compliant method (e.g., microphone usage events) that can be relied upon? Or is this something that iOS explicitly prevents for privacyreasons? Expecting solutions that align with Apple’s policies and would be accepted under the App Store Review Guidelines. Thanks in advance for any guidance.

AVAudioFormat has no Swift concurrency annotations but the documentation states "Instances of this class are immutable." This made me always assume it was safe to pass AVAudioFormat instances around. Is this the case? If so can it be marked as Sendable? Am I missing something?

I've got a problem with my app where I'm testing it on my own phone. I'm using audio kit to generate tones as part of the app. Everything seems to work fine. Sounds start, Stop, etc. They play when the app is closed and when the phone is locked, so background is working. However, I'm seeing an issue where, even when STOP is pressed and the application exited, if I get a notification such as a text message, the base tone for the app starts to play. If I then open the app, check the Start/Stop button - it says start so that. hasnt' been activated. If I click Start, then a 2nd tone starts. This one stops with the Stop button. However the original tone that was set off by an incoming message carries on playing. Until I go to the Open Apps View on the phone and slide the application upwards. For the life of me, I can't figure out whats happening here.

Not able to record audio in AAC format with 96 kHz sample rate using AVAudioRecorder or Extended Audio File services with 96 kHz input audio from input device. The audio recording settings used are let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatMPEG4AAC), AVSampleRateKey: sampleRate AVNumberOfChannelsKey: 1 AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] When tried using AVAudioEngine using AVAudioFile, AVAudioFile(forWriting: fileURL, // file extension .m4a settings: fileSettings, commonFormat: AVAudioCommonFormat.pcmFormatFloat32, interleaved: interleaved) else { return } got error CodecConverterFactory.cpp:977 unable to select compatible encoder sample rate AudioConverter.cpp:1017 Failed to create a new in process converter -> from 1 ch, 96000 Hz, Float32 to 1 ch, 96000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame, with status 1718449215

Your draft looks great! Here's a refined version with the iOS 17 comparison emphasized and slightly better flow: Hi Apple Engineers and fellow developers, I'm experiencing a critical regression with ShazamKit's background operation on iOS 18. ShazamKit's SHManagedSession stops identifying songs in the background after approximately 20 seconds on iOS 18, while the exact same code works perfectly on iOS 17. The behavior is consistent: the app works perfectly in the foreground, but when backgrounded or device is locked, it initially works for about 20 seconds then stops identifying new songs. The microphone indicator remains active suggesting audio access is maintained, but ShazamKit doesn't send identified songs in the background until you open the app again. Detection immediately resumes when bringing the app to foreground. My technical setup uses SHManagedSession for continuous matching with background modes properly configured in Info.plist including audio mode, and Background App Refresh enabled. I've tested this on physical devices running iOS 18.0 through 18.5 with the same results across all versions. The exact same code running on iOS 17 devices works flawlessly in the background. To reproduce: initialize SHManagedSession and start matching, begin song identification in foreground, background the app or lock device, play different songs which are initially detected for about 20 seconds, then after the timeout period new songs are no longer identified until you bring the app to foreground. This regression has impacted my production app as users who rely on continuous background music identification are experiencing a broken feature. I submitted this as Feedback ID FB15255903 last September with no solution so far. I've created a minimal demo project that reproduces this issue: https://github.com/tfmart/ShazamKitBackground Has anyone else experienced this ShazamKit background regression on iOS 18? Are there any known workarounds or alternative approaches? Given the time this issue has persisted, could we please get acknowledgment of this regression, expected timeline for a fix, or any recommended workarounds? Testing environment is Xcode 16.0+ on iOS 18.0-18.5 across multiple physical device models. Any guidance would be greatly appreciated.

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &amp;prop, 0, nullptr, &amp;dataSize, &amp;pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?