Hi all, I’ve implemented the new Core Audio Tap API (AudioHardwareCreateProcessTap with CATapDescription) and I’m seeing consistent level attenuation that scales with the number of stereo output pairs exposed by the target device. What I observe Device with 4 stereo pairs (8 outs) → tap shows −12.04 dB relative to source. True 2-ch devices (built-in speakers, AirPods) → ~0 dB attenuation. The attenuation appears regardless of whether I: Create a global (default-output) tap via initStereoGlobalTapButExcludeProcesses: Or create a per-process/per-device tap via initWithProcesses:andDeviceUID:withStream: Additionally, the routing choice inside the sending app matters: App output to “System/Default Output” → I often see no attenuation. App output directly to a multi-out interface (e.g., RME Fireface) → I see the pair-count-scaled attenuation. I can query Core Audio for the number of output channels/pairs and gain-compensate (+20·log10(N_pairs) dB) and that matches my measurements for many cases. However, this compensation is not universally correct because it seems to depend on where each process routes its audio (Default Output vs. direct device), even when those processes are included in the same tap aggregate. Question Is there a supported way to obtain the raw, unattenuated streams for all processes through the Tap API—i.e., to bypass this automatic headroom/attenuation behavior entirely? If this attenuation is expected by design: Is there a documented rule for when it applies (global vs. device taps, per-process taps, stream selection, etc.)? Is there a property/flag to disable it, or a reliable, official method to compute the exact compensation (beyond counting stereo pairs)? Any guidance on ensuring consistent levels when multiple processes route differently (Default Output vs. direct device) but are captured by the same tap? Environment API: AudioHardwareCreateProcessTap + CATapDescription Devices: built-in output (2-ch), RME Fireface (8+ outs / 4+ stereo pairs) Behavior reproducible with both global and per-process/per-device tap descriptions. Attenuation example: 4 stereo pairs → −12.04 dB observed. Happy to provide a minimal sample, measurements, and device logs. Thanks! — David

Recently, after the update of 26.3 Mac OS (Tahoe), the ordering of my music app has been horrible at best - music disappearing, tracks not aligning with albums (even if the albums are different years). It's created quite a problem, because the disappearing tracks issue seems to be replicating to iOS devices as well (although track numbering and album association seem to be stable). Has anyone else heard of this issue?

Environment Device: iPhone 16e iOS Version: 18.4.1 - 18.7.1 Framework: AVFoundation (AVAudioEngine) Problem Summary On iPhone 16e (iOS 18.4.1-18.7.1), the installTap callback stops being invoked after resuming from a phone call interruption. This issue is specific to phone call interruptions and does not occur on iPhone 14, iPhone SE 3, or earlier devices. Expected Behavior After a phone call interruption ends and audioEngine.start() is called, the previously installed tap should continue receiving audio buffers. Actual Behavior After resuming from phone call interruption: Tap callback is no longer invoked No audio data is captured No errors are thrown Engine appears to be running normally Note: Normal pause/resume (without phone call interruption) works correctly. Steps to Reproduce Start audio recording on iPhone 16e Receive or make a phone call (triggers AVAudioSession interruption) End the phone call Resume recording with audioEngine.start() Result: Tap callback is not invoked Tested devices: iPhone 16e (iOS 18.4.1-18.7.1): Issue reproduces ✗ iPhone 14 (iOS 18.x): Works correctly ✓ iPhone SE 3 (iOS 18.x): Works correctly ✓ Code Initial Setup (Works) let inputNode = audioEngine.inputNode inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioEngine.start() Interruption Handling NotificationCenter.default.addObserver( forName: AVAudioSession.interruptionNotification, object: AVAudioSession.sharedInstance(), queue: nil ) { notification in guard let userInfo = notification.userInfo, let typeValue = userInfo[AVAudioSessionInterruptionTypeKey] as? UInt, let type = AVAudioSession.InterruptionType(rawValue: typeValue) else { return } if type == .began { self.audioEngine.pause() } else if type == .ended { try? self.audioSession.setActive(true) try? self.audioEngine.start() // Tap callback doesn't work after this on iPhone 16e } } Workaround Full engine restart is required on iPhone 16e: func resumeAfterInterruption() { audioEngine.stop() inputNode.removeTap(onBus: 0) inputNode.installTap(onBus: 0, bufferSize: 4096, format: nil) { buffer, time in self.processAudioBuffer(buffer, at: time) } audioEngine.prepare() try audioSession.setActive(true) try audioEngine.start() } This works but adds latency and complexity compared to simple resume. Questions Is this expected behavior on iPhone 16e? What is the recommended way to handle phone call interruptions? Why does this only affect iPhone 16e and not iPhone 14 or SE 3? Any guidance would be appreciated!

I'm using AVFoundation to make a multi-track editor app, which can insert multiple track and clip, including scale some clip to change the speed of the clip, (also I'm not sure whether AVFoundation the best choice for me) but after making the scale with scaleTimeRange API, there is some short noise sound in play back. Also, sometimes it's fine when play AVMutableCompostion using AVPlayer with AVPlayerItem, but after exporting with AVAssetReader, will catch some short noise sounds in result file.... Not sure why. Here is the example project, which can build and run directly. https://github.com/luckysmg/daily_images/raw/refs/heads/main/TestDemo.zip

Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!

I have a music app I'm developing and having a weird issue where I can see now playing info for every other platform than tvOS. As far as I can tell I have correctly configured the MPNowPlayingInfoCenter MPNowPlayingInfoCenter.default().nowPlayingInfo = nowPlayingInfo MPNowPlayingInfoCenter.default().playbackState = .playing Are there any extra requirements to get my app's now-playing info showing in control center on tvOS? Another strange issue that might be related is I can use the apple TV remote to pause audio but not resume playback, so I feel like there's something I'm missing about registering audio playback on tvOS specifically.

I am a graduate student conducting research in speech/audio signal processing and multimodal interaction. Apple Vision Pro is widely recognized as a multimodal interactive system supporting voice, eye, and gesture inputs. However, I could not find detailed specifications or documentation about the audio input sampling rate used by the device’s built-in microphone array when capturing user audio. Specifically, I would like to understand: What is the default audio input sampling rate (e.g., 16 kHz, 44.1 kHz, 48 kHz, etc.) for the Vision Pro’s microphones? When developing with visionOS / AVAudioSession / AVAudioEngine, is there a documented or recommended sampling rate for audio capture? Are there any best practices or settings for enabling high-quality voice capture on Vision Pro (especially for voice research tasks)? For context, my work involves voice processing, analysis, and possibly on-device real-time speech recognition. Any pointers to relevant APIs, documentation or examples (especially regarding audio capture buffer size or available formats on visionOS) would be very helpful. Thank you in advance! Best regards.

Hi, when a CoreMIDI driver controls physical HW it is probably quite commune to have to control the amount of MIDI data received from the system. What comes to mind is to just delay returning control of the MIDIDriverInterface::Send() callback to the calling process. While the application trying to send MIDI really stalls until the callback returns it seems only to be a side effect of a generally stalled CoreMIDI server. Between the callbacks the application can send as much MIDI data as it wants to CoreMIDI, it's buffering seems to be endless... However the HW might not be able to play out all the data. It seems there is no way to indicate an overflow/full buffer situation back the application/CoreMIDI. How is this supposed to work? Thanks, any hints or pointers are highly appreciated! Hagen.

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?

Hi 👋! We have a SpriteKit-based app where we play AVAudio sounds in three different ways: Effects (incl. UI sounds) with AVAudioPlayer. Long looping tracks with AVAudioPlayer. Short animation effects on the timeline of SpriteKit's SKScene files (effectively SKAudioNode nodes). We've found that when you exit the app or otherwise interrupt audio plays, future audio plays often fail. For example, there's a WebKit-based video trailer inside the app, and if you play it, our looping background music track (2.) will stop playing, and won't resume as you close the trailer (return from WebKit). This is probably due to us not manually restarting the track (so may well be easily fixed). Periodically played AVAudioPlayer audio (1.) are not affected. However, the more concerning thing is that the audio tracks on SKScene file timelines (3.) will no longer play. My hypothesis is that AVAudioEngine gets interrupted, and needs to be restarted for those AVAudioNode elements to regain functionality. Thing is, we don't deal with AVAudioEngine at all currently in the app, meaning it is never initiated to begin with. Obviously things return to normal when you remove the app from short-term memory and restart it. However, it seems many of our users aren't doing this, and often report audio failing presumably due to some interruption in the past without the app ever being cleared from memory. Any idea why timeline-run SKAudioNodes would fail like this? Should the app react to app backgrounding/foregrounding regarding audio? Any help would be very much appreciated ✌️!

Hello. My app uses AVAudioRecorder to generate recording files, which are consistently only 4kb in size. Most users generate audio files normally, with only a few users experiencing this phenomenon occasionally. After uninstalling and installing the app, it will work normally, but it will reappear after a period of time. I have compared that the problematic audio files generated each time are fixed and cannot be played. Added the audioRecorderDidFinishRecording proxy method, which shows that the recording was completed normally. The user also reported that the recording is normal, but there is a problem with the generated file. How should I handle this issue? Look forward to your reply. - (void)startRecordWithOrderID:(NSString *)orderID { AVAudioSession *audioSession = [AVAudioSession sharedInstance]; [audioSession setCategory:AVAudioSessionCategoryRecord error:nil]; [audioSession setActive:YES error:nil]; NSMutableDictionary *settings = [[NSMutableDictionary alloc] init]; [settings setObject:[NSNumber numberWithFloat: 8000.0] forKey:AVSampleRateKey]; [settings setObject:[NSNumber numberWithInt: kAudioFormatLinearPCM] forKey:AVFormatIDKey]; [settings setObject:[NSNumber numberWithInt:16] forKey:AVLinearPCMBitDepthKey]; [settings setObject:[NSNumber numberWithInt: 1] forKey:AVNumberOfChannelsKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsBigEndianKey]; [settings setObject:[NSNumber numberWithBool:NO] forKey:AVLinearPCMIsFloatKey]; NSString *path = [WDUtility createDirInDocument:@"audios" withOrderID:orderID withPathExtension:@"wav"]; NSURL *tmpFile = [NSURL fileURLWithPath:path]; recorder = [[AVAudioRecorder alloc] initWithURL:tmpFile settings:settings error:nil]; [recorder setDelegate:self]; [recorder prepareToRecord]; [recorder record]; }

Hi, I'm trying to plan out development of an app and am wondering if it is possible to have user generated content automatically populate into a custom shazamkit catalogue and be able to query this catalogue non-locally? Storing all the submissions locally would obviously not scale.

I'm working on adding CarPlay support to an audio app and am running into an issue. Occasionally, when a user opens the app from CarPlay while the main app scene is either not connected or is currently in the background, I will receive an error when attempting to activate the audio session. The code below mimics my setup: do { try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio) try AVAudioSession.sharedInstance().setActive(true) } catch { print(error) // NSOSStatusErrorDomain - 560557684: Session activation failed } That error code maps to AVAudioSession.ErrorCode.cannotInterruptOthers. Once in this state, all subsequent attempts to play different pieces of content will fail. However, things will start working normally if the user opens the app on their phone and tries again from CarPlay (while the app is in the foreground on their phone). I'm not sure why it would behave this way and want to note that I do have the audio background mode capability enabled. Has anyone else encountered this? Are there any workarounds or changes I could make to prevent this from happening?

Issue Description I'm implementing a system audio capture feature using AudioHardwareCreateProcessTap and AudioHardwareCreateAggregateDevice. The app successfully creates the tap and aggregate device, but when starting the IO procedure with AudioDeviceStart, it sometimes fails with OSStatus error 1852797029. (The operation couldn’t be completed. (OSStatus error 1852797029.)) The error occurs inconsistently, which makes it particularly difficult to debug and reproduce. Questions Has anyone encountered this intermittent "nope" error code (0x6e6f7065) when working with system audio capture? Are there specific conditions or system states that might trigger this error sporadically? Are there any known workarounds for handling this intermittent failure case? Any insights or guidance would be greatly appreciated. I'm wondering if anyone else has encountered this specific "nope" error code (0x6e6f7065) when working with system audio capture.

I’m building a teleprompter-style app that relies on Picture in Picture. PiP starts correctly on device. Everything works — until another app (e.g. TikTok / Instagram) starts active video recording. When camera capture begins in the foreground app, iOS terminates my PiP session. Some teleprompter apps appear to keep PiP active while recording in other apps, so I’m trying to understand the recommended architectural pattern for this scenario. Is there a documented approach or best practice to keep PiP stable during third-party camera capture? Looking specifically for guidance on the correct AVKit / AVAudioSession configuration for this use case.

I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

Hello, I'm observing an intermittent memory leak being reported in the iOS Simulator when initializing and starting an AVAudioEngine. Even with minimal setup—just attaching a single AVAudioPlayerNode and connecting it to the mainMixerNode—Xcode's memory diagnostics and Instruments sometimes flag a leak. Here is a simplified version of the code I'm using: // This function is called when the user taps a button in the view controller: #import "ViewController.h" @interface ViewController () @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; } - (IBAction)myButtonAction:(id)sender { NSLog(@"Test"); soundCreate(); } @end // media.m static AVAudioEngine *audioEngine = nil; void soundCreate(void) { if (audioEngine != nil) return; [[AVAudioSession sharedInstance] setCategory:AVAudioSessionCategoryAmbient error:nil]; [[AVAudioSession sharedInstance] setActive:YES error:nil]; audioEngine = [[AVAudioEngine alloc] init]; AVAudioPlayerNode* playerNode = [[AVAudioPlayerNode alloc] init]; [audioEngine attachNode:playerNode]; [audioEngine connect:playerNode to:(AVAudioNode *)[audioEngine mainMixerNode] format:nil]; [audioEngine startAndReturnError:nil]; } In the memory leak report, the following call stack is repeated, seemingly in a loop: ListenerMap::InsertEvent(XAudioUnitEvent const&, ListenerBinding*) AudioToolboxCore ListenerMap::AddParameter(AUListener*, void*, XAudioUnitEvent const&) AudioToolboxCore AUListenerAddParameter AudioToolboxCore addOrRemoveParameterListeners(OpaqueAudioComponentInstance*, AUListenerBase*, AUParameterTree*, bool) AudioToolboxCore 0x180178ddf

Since iOS 18, the system setting “Allow Audio Playback” (enabled by default) allows third-party app audio to continue playing while the user is recording video with the Camera app. This has created a problem for the app I’m developing. ➡️ The problem: My app plays continuous audio in both foreground and background states. If the user starts recording video using the iOS Camera app, the app’s audio — still playing in the background — gets captured in the video — obviously an unintended behavior. Yes, the user could stop the app manually before starting the video recording, but that can’t be guaranteed. As a developer, I need a way to stop the app’s audio before the video recording begins. So far, I haven’t found a reliable way to detect when video recording starts if ‘Allow Audio Playback’ is ON. ➡️ What I’ve tried: — AVAudioSession.interruptionNotification → doesn’t fire — devicesChangedEventStream → not triggered I don’t want to request mic permission (app doesn’t use mic). also, disabling the app from playing audio in the background isn’t an option as it is a crucial part of the user experience ➡️ What I need: A reliable, supported way to detect when the Camera app begins video recording, without requiring mic access — so I can stop audio and avoid unintentional overlap with the user’s recordings. Any official guidance, workarounds, or AVFoundation techniques would be greatly appreciated. Thanks.

Currently, I have successfully used ChannelMap to map hardware input channels and obtained audio data from the hardware device's MIC and OTG inputs. Additionally, I have used ChannelMap to map output channels to freely feed data for playback to each output channel. However, I now have a problem. I have a hardware device that only has output channels (no input channels), and the system has set this hardware device as the default playback device. In this case, how can I obtain the audio data being played to the output channels for modification?

Hi there, I recently launched a dj app to the mac app store, and was wondering how I could access songs for mixing purposes via Apple Music just like how serato, rekordbox, djay, and other DJ apps do? Thanks, Gunek