I want to display the refresh rate on the screen of the iPhone (14 Pro Max), but each app of the App Store's "Floating Clock", "Floating Clock Premium" and "Screen Renewal Rate - RefreshRate Realtime" can only display two of 60Hz and 120Hz, and I wonder if it can display numbers of 1Hz, 10Hz, tens of Hz, or more than 3 levels. Does anyone know how to do it?

I noticed that MTLPixelFormat has this cases: case r32Float = 55 case rg32Float = 105 case rgba32Float = 125 But no case rgb32Float. What's the reason for such a discrimination?

Hi everyone I'm experiencing an issue with iPadOS 26 regarding multi-touch gesture detection. When performing a quick four-finger gesture (tap and swipe), the system often fails to recognize the input. This especially affects multi-touch gestures, such as rhythm games with difficult levels. Steps to Reproduce: Place four fingers on the screen. Perform a quick tap or a quick horizontal swipe (like the one used to switch apps). Observe whether the gesture is ignored or detected inconsistently. Expected Behavior: 4-finger multitouch gestures should be recognized regardless of gesture speed, just like previous iPadOS versions. Actual Behavior: Gestures fail to be detected when executed quickly—same gestures still work, and miss notes in rhythm games. You can check out my posts on Twitter/x and Facebook: [https://x.com/kokona_fwa/status/1978131164104728949?s=61] Facebook: [https://m.facebook.com/groups/idipad/permalink/24438964899058806/?]

Hello, I have some confusion regarding ResidencySet. Specifically, about the requestResidency() function: how often should we call it? I have a captureOutput(_:didOutput:from:) method that is triggered at 60 or 120 fps. Inside this method, I am calling the following code every frame: computeResidencySet.removeAllAllocations() сomputeResidencySet.addAllocation(TextureA) computeResidencySet.addAllocation(TextureB) computeResidencySet.addAllocation(TextureC) computeResidencySet.commit() computeResidencySet.requestResidency() // Should we call it every frame? Please keep in mind that TextureA, TextureB, and TextureC are unique for each call (new instances are provided on every frame)."

We're using RealityKit to create a science education AR app for iOS, iPadOS, and visionOS. In the WWDC25 session video "Bring your SceneKit project to RealityKit" https://aninterestingwebsite.com/videos/play/wwdc2025/288 at 8:15, it's explained that when using RealityKit, RealityView should be used in all cases, whereas in the past, SceneKit required SCNView, SceneView, or ARSCNView, depending on an app's requirements. Because the initial development of our app on iOS predates iOS 18's RealityView, our app currently uses ARView to render RealityKit AR content on iOS and iPadOS. Is it recommended that we migrate to RealityView, or can we safely continue using our existing ARView implementation? We'd prefer to avoid unnecessary development cost. If migrating from ARView to RealityView is recommended, what specific benefits should we expect from this transition? Thank you.

I'm using a class with tangents to render on RealityKit for VisionOS but in Vision26 it cause a crash on App and there not documentation how implement cp_drawable_compute_projection I have tried a few options but without success. Could you help me to implement it ? The part of code is: return drawable.views.map { view in let userViewpointMatrix = (simdDeviceAnchor * view.transform).inverse let projectionMatrix = ProjectiveTransform3D( leftTangent: Double(view.tangents[0]), rightTangent: Double(view.tangents[1]), topTangent: Double(view.tangents[2]), bottomTangent: Double(view.tangents[3]), nearZ: Double(drawable.depthRange.y), farZ: Double(drawable.depthRange.x), reverseZ: true ) let screenSize = SIMD2(x: Int(view.textureMap.viewport.width), y: Int(view.textureMap.viewport.height)) return ModelRendererViewportDescriptor(viewport: view.textureMap.viewport, projectionMatrix: .init(projectionMatrix), viewMatrix: userViewpointMatrix * translationMatrix * rotationMatrix * scalingMatrix * commonUpCalibration, screenSize: screenSize) }

I have implemented the Game Center for authentication and saving player's game data. Both authentication and saving player's data works correctly all the time, but there is a problem with fetching and loading the data. The game works like this: At the startup, I start the authentication After the player successfully logs in, I start loading the player's data by calling fetchSavedGames method If a game data exists for the player, I receive a list of SavedGame object containing the player's data The problem is that after I uninstall the game and install it again, sometimes the SavedGame list is empty(step 3). But if I don't uninstall the game and reopen the game, this process works fine. Here's the complete code of Game Center implementation: class GameCenterHandler { public func signIn() { GKLocalPlayer.local.authenticateHandler = { viewController, error in if let viewController = viewController { viewController.present(viewController, animated: false) return } if error != nil { // Player could not be authenticated. // Disable Game Center in the game. return } // Auth successfull self.load(filename: "TestFileName") } } public func save(filename: String, data: String) { if GKLocalPlayer.local.isAuthenticated { GKLocalPlayer.local.saveGameData(Data(data.utf8), withName: filename) { savedGame, error in if savedGame != nil { // Data saved successfully } if error != nil { // Error in saving game data! } } } else { // Error in saving game data! User is not authenticated" } } public func load(filename: String) { if GKLocalPlayer.local.isAuthenticated { GKLocalPlayer.local.fetchSavedGames { games, error in if let game = games?.first(where: {$0.name == filename}){ game.loadData { data, error in if data != nil { // Data loaded successfully } if error != nil { // Error in loading game data! } } } else { // Error in loading game data! Filename not found } } } else { // Error in loading game data! User is not authenticated } } } I have also added Game Center and iCloud capabilities in xcode. Also in the iCloud section, I selected the iCloud Documents and added a container. I found a simillar question here but it doesn't make things clearer.

Hello ! We are working on a real-time 2-player online game targeting multiple Apple devices. The following issue only occurs on tvOS: When selecting matchmaking to connect with another random player, the native Game Center interface opens and begins the matchmaking process. Almost immediately after clicking "start", the following log appears in the console, and the matchmaking screen remains indefinitely without completing: Timeout while starting matching with request: <GKMatchRequestInternal 0x30d62f690> { defaultNumberOfPlayers : 0 isLateJoin : 0 localPlayerID : U:bea182d69b85f0839e3958742fbc4609 matchType : 0 maxPlayers : 2 minPlayers : 2 playerAttributes : 4294967295 playerGroup : 1 preloadedMatch : 0 recipientPlayerIDs : <__NSArrayM 0x3034ed5c0> {} recipients : <__NSArrayM 0x3034ee280> {} restrictToAutomatch : 0 version : 1 archivedSharePlayInviteeTokensFromProgrammaticInvite, inviteMessage, localizableInviteMessage, messagesBasedRecipients, properties, queueName, recipientProperties, rid, sessionToken : (null) } . Error: (null) However, as shown in the code snippet below, the task does not complete when the log appears. But when we manually cancel the matchmaking process, the "User cancel" log is correctly triggered. var gkMatchRequest = GKMatchRequest.Init(); gkMatchRequest.MinPlayers = 2; gkMatchRequest.MaxPlayers = 2; var matchRequestTask = GKMatchmakerViewController.Request(gkMatchRequest); matchRequestTask.ContinueWith(t => { Debug.LogException(t.Exception); }, TaskContinuationOptions.OnlyOnFaulted); matchRequestTask.ContinueWith(t => { Debug.Log("User cancel"); }, TaskContinuationOptions.OnlyOnCanceled); matchRequestTask.ContinueWith(t => { Debug.Log("Success"); }, TaskContinuationOptions.OnlyOnRanToCompletion); We have tested this on multiple Apple TV and network types (Wi-Fi, 5G, Ethernet), but we consistently encounter this bug along with the same log message. Could you please help us understand or resolve this issue? Thank you.

Hello I am trying to get thread group memory access in fragment shader. In essence, I would like to have all the fragments in a tile to bitwiseOR some value. My idea was to use simd_or across the SIMD group, then make each SIMD group thread 0 to atomic or the value into thread group memory. Finally very first thread of the tile would be tasked with writing the value down to texture with write access. Now, I can allocate the thread group memory argument to the fragment function all right. MTLRenderEncoder has setThreadgroupMemoryLength call, which I am using the following way [renderEncoder setThreagroupMemoryLength: 16 offset: 0 atIndex:0] Unfortunately, all I am getting is the following error (runtime assertion) -[MTLDebugRenderCommandEncoder setThreadgroupMemoryLength:offset:atIndex:]:3487: failed assertion Set Threadgroup Memory Length Validation offset + length(16) must be <= threadgroupMemoryLength(0).` What I am doing wrong? How I can get thread group memory in the fragment shader? I know I could use tile shading and compute function but the problem is that here I really like to use fragment stuff. Will be grateful for help.

I would like a monthly recurring leaderboard, but the most days one can set for the recurring leaderboard is 30, and some months have 31 days (or 28/29). This is dumb. I guess I have to manually reset a classic leaderboard each month to get this result? Additionally once it closes and is about to reset (I also have daily recurring leaderboards), I'd like to grant the top placers on the leaderboard a corresponding achievement, but I don't see any way of doing this. I believe I can do all these things on PlayFab, but it'll take a bit more work, and eventually cost. Any one have advise?

HI all, I'm in the early stages of testing a game that will have real-time device-to-device communication using GameCenter. I've read something about setting up GameCenter "sandbox" accounts to test prior to the game's release, but I can't find anything reliable about how to do so. I've found lots of web pages which purport to describe how to do this task, but what they describe seems to be outdated, as the steps don't appear to be available in modern versions of iOS. I'm testing on iOS 18 and 26. Document search isn't helping--I mostly find information on how to set up StoreKit sandbox accounts, which I assume are different things altogether--so if you could point me towards an article that allows me to test a new, unreleased GameKit app between devices, I'd appreciate it. People are developing GameCenter apps, so I know it's possible... advTHANKSance

our app is live, and it appears that since the ios 18 update - the VideoMaterial renders pink / purple color instead of the video (picture attached). the audio is rendered properly. we found that it occurs on old devices: iPhone 11 & iPhone SE 2020. I've found this thread of Andy Jazz on stackoverflow: Steps to Reproduce: Create a plane for the video screen. Apply a VideoMaterial using AVPlayerItem. Anchor the model entity to an ARImageAnchor. Expected Outcome: The video should play as a material on the plane in RealityKit. Actual Outcome: On iOS 18, the plane appears pink, indicating the VideoMaterial isn’t applied. What I’ve Tried: -Verified the video URL is correct. -Checked that the AVPlayerItem and VideoMaterial are initialised correctly. -Ensured the AVPlayer is playing the video. I also tried different formats (mov / mp4 / m4v), and verifying that the video's status is readyToPlay. any suggestions?

Dear Apple Developer Support, I hope this message finds you well. I am a game developer looking to integrate Game Center into our game. Before proceeding, I would like to understand the analytical capabilities available post-integration. Specifically, I am interested in tracking detailed metrics such as: The number of new player downloads driven by Game Center features (e.g., friend challenges, leaderboards, or achievements). Data on user engagement and conversions originating from Game Center interactions. I have explored App Store Connect’s App Analytics but would appreciate clarification on whether Game Center-specific data (e.g., referrals from challenges or social features) is available to measure growth and optimize our strategies. If such data is accessible, could you guide me on how to view it? If not, are there alternative methods or plans to incorporate this in the future? Thank you for your time and assistance. I look forward to your response. Best regards, Bella

I need a MeshResource from ModelEntity to generate a box collider, but ModelEntity fails to load USDZ files from the Reality Composer Pro (RCP) bundle. This code works for loading an Entity: // Successfully loads as generic Entity previewEntity = try await Entity(named: fileName, in: realityKitContentBundle) But this fails when trying to load as ModelEntity: // Fails to load as ModelEntity modelEntity = try await ModelEntity(named: fileName, in: realityKitContentBundle) I found this thread mentioning: "You'll likely go from USDZ to Entity which contains a MeshResource when you load/init the USDZ file." But it doesn't explain ​how to actually extract the MeshResource. Could anyone advise: How to properly load USDZ files as ModelEntity from RCP bundles? How to extract MeshResource from a successfully loaded Entity? Alternative approaches to generate box colliders if direct extraction isn't possible? Sample code for extraction or workarounds would be greatly appreciated!

As part of the WWDC25 Keynote, a technology was announced that can present 2D images as 3D spatial scenes. This announcement is supported by a Press Release. ...developers can use the Spatial Scene API to make their app experience even more immersive. Zillow is taking advantage of the API for their Zillow Immersive app, allowing users to see images of homes and apartments with the rich depth and dimension that spatial scenes offer. The feature also appears in the Photos App on iOS 26 Developer Beta 1. Tapping "Spatial Scene" on any photo opens a view of that photo with a parallax effect. I've searched the WWDC sessions and new documentation and have come up short. Reaching out here for help. Is there any documentation for Spatial Scene API? Or any guidance on how to implement the spatial scene in iOS?

Hello, MacOS 26 Betas are limiting games (noticeably, games that use java) to the native display of the MacBook Pro (120hz). Even connecting an external display this is not changing. I have submitted a bug report, but I have not had any responses to it yet. I am looking to see if anyone may have an answer or fix to this issue. Thanks!

I want to use reality to create a custom material that can use my own shader and support Mesh instancing (for rendering 3D Gaussian splating), but I found that CustomMaterial does not support VisionOS. Is there any other interface that can achieve my needs? Where can I find examples?

Looks like is something to do with the code and that is why my images are distorted. please help me get to the right person to help me get this issue resolved

Hi everyone, I’m developing an iPad app that will be running continuously with the screen always on — similar to a restaurant ordering system. I understand that some of the newer iPad Pro models are equipped with OLED displays. I'm concerned about the potential risk of screen burn-in due to static UI elements being displayed for extended periods. Does burn-in occur on the OLED iPad Pro models under such usage? Would it be advisable to implement a screen saver or periodically animate/change parts of the UI to prevent this? Any insights or best practices would be greatly appreciated. Thank you!

Hi, seems MSL is missing support for a clock() shader instruction available in other graphics APIs like Vulkan or OpenGL for example.. useful for counting cost in number of clock cycles of some code insider shader with much finer granularity than launching a micro kernel with same instructions and measuring cycles cost from CPU.. also useful for MoltenVK to support that extensions.. thanks..