Steps to reproduce: Open Xcode 26.3 → Settings → Intelligence → Claude sign-in Click the sign-in button — spinner begins, never completes An email the arrives with a magic link. The magic link opened a browser page which displayed a 6-digit verification code with instructions reading "enter this verification code where you first tried to sign in" — i.e. back in Xcode. However, Xcode was showing only an endless spinner with no code entry field anywhere in the UI. This is the core bug. I did since manage to complete authentication sign-in through a second browser verification field that eventually appeared after about 10 minutes and did get signed in, but the Claude Intelligence agent still returns "Your request could not be completed" even after successful sign-in and a full Xcode restart. Prior to this bug starting at 10 am on February 19 I had been using the intelligence agent successfully for about a week. Anthropic did have some sort of event on their system around February 18/19 so maybe this has been a result of that. I have notified Anthropic support and Apple Feedback Assistant. Does anybody have a workaround until either anthropic or Apple get back to me?

Hi, I recently updated my Mac to macOS Sequoia 15.7.2, and then updated my Xcode packages right afterward. However, when I try to open Xcode, I receive the message: “You can’t open the application because it is being updated.” I contacted Apple Developer Support (software) by phone and went through their troubleshooting steps, but the issue persists. They confirmed that everything appears fine on their end. In System Settings, both macOS and Xcode show as fully up to date. However, when I manually check in the App Store, it says Xcode needs to be updated. When I press Update, I get the following error: “Xcode could not be installed. Please try again later.” I’m fairly new to Xcode, but it seems there may be an incomplete update or verification loop preventing the installation from finishing properly. Could you please advise on how to resolve this so I can open Xcode again?

Hello, I've been searching online for ways to remedy this issue for the past 3 days and this is my last resort. The Issue Build on device fails to connect to the device. The prompt will permanently be stuck loading in that screen. Finder is able to connect to the device, just that Xcode is unable to. Xcode does prompt for passcode on the device, and I have entered it accordingly. I note that i AM on VPN, but even disabling VPN and turning off Wifi does not fix the issue. This was working until several days ago. Not sure what the issue is. Fixes Attempted Tried with a different cable, and USB ports Tried with different devices (multiple devices both iPad and iPhone has the same issue) Turn Off and On developer mode on devices. Clear Trusted Computers on devices. Updating both devices to the latest iOS version. Quitting Xcode Clearing derived cache Restarting Macbook Updating to the latest iOS version on Macbook Reinstalling Xcode toggling signing certificates I was trying other fixes like "pkill usbmuxd", but since I am on corporate hardware, i will be required to escalate it if i require sudo permissions. Is anyone able to provide a concrete solution or explanation why this happens?

I have been getting the following error intermittently (once it happens, then its consistent) when I try to build my app Showing Recent Errors Only Unable to resolve build file: BuildFile<b11862f281fd8c8287d499b4f0922a9c61c95323d2196ba877ed344a02baffbb> (The workspace has a reference to a missing target with GUID '0c7e19da3805e0a412c717704d4549fc25560b498add930cbef9623bd9afb53a') There have been no changes to my project (git status is clean). I have tried cleaning DerivedData as well, but it did not help. How am I supposed to figure out from the GUID what is it that xcode is trying to find?

As stated in the title, my device is M4 macmini, running macOS 26, with Xcode version 26.1. The error message is ": retrying debugserver without secure proxy due to error: Error Domain=com.apple.dtdevicekit Code=811 UserInfo={NSUnderlyingError=0xc42b07930 {Error Domain=com.apple.dt.MobileDeviceErrorDomain Code=-402653150 UserInfo={MobileDeviceErrorCode=, com.apple.dtdevicekit.stacktrace=, DVTRadarComponentKey=261622, NSLocalizedDescription=}}, NSLocalizedRecoverySuggestion=Please check your connection to your device., DVTRadarComponentKey=261622, NSLocalizedDescription=}, the official documentation does state that debugging is supported for devices running at least iOS 15. However, my 2019 MacBook Pro, with macOS 15.7.2 and Xcode 26.1 installed, can debug iOS 12 devices normally. The product manager has asked me to identify the issue, but I am at a loss. If anyone can provide a solution or confirm that support for iOS 12 is no longer available, we would be very grateful. Additionally, iOS 13 devices can all be debugged normally

Hi there, I am trying to use the agentic coding with the new Xcode update, however the "Intelligence" tab is not coming up on the left hand side of my Xcode settings. I've ensured I have macOS greater than 26, I've got Apple Intelligence and Siri enabled. I've shut down and restarted Xcode and my computer. Still, the option is not available. Can anyone help?

Hi, In Xcode 26.2, editor tabs adapt their width to the number of pinned tabs: In Xcode 26.3, editor tabs have a minimal width, after which the row of tabs becomes horizontally scrollable: Notice how less tabs are visible at a time on Xcode 26.3 (second image). Yet, there is enough horizontal space to accommodate more, as shown on Xcode 26.2 (first image). This is a UX regression. How can I revert back to 26.2 tab sizing behavior? Thank you.

I have two apps; one is a subset of functionality of the other. The smaller app has about 170 Swift files. The larger app has these files plus about 120 more. So I would expect the larger app to take around twice as long to build. Instead, the smaller app takes less than a minute to build while the larger app takes over 13 minutes to build; to be exact, it takes 15.3 times longer. While reviewing the build report, I noticed that the smaller app compiles the Swift files in batches, with each batch taking around 10 seconds, but with up to 17 batches running at once. In contrast, the larger app compiles all 290 Swift files in one giant batch, so apparently there is no multithreading of the Swift compilation (see screen shots below). The difference in the number of batches the smaller app compiles at once roughly corresponds to the difference in overall build time. Is there a build setting I can change to make the larger app compile Swift files in multiple smaller batches as the smaller app is doing? I checked SWIFT_COMPILATION_MODE and it's the same in both apps (Incremental for debugging and Whole Module for release) but I don't know what other settings I should check.

I decided to try out XCode 26.2s new AI abilities but I only get a "Your request couldn't be completed". When clicking the details button I get see this error: InferenceError::unspecifiedUnderlyingError::Error(message: "Unknown parameter: 'tool_call_outputs'.", type: "invalid_request_error", code: Optional("unknown_parameter"), privacyPassRedemptionResponse: nil, userFacingLocalizedErrorMessage: nil) How do I fix that?

I was having an issue with the new xcode and was forced to to go back to to Xcode 26.0.1. ( I need iOS simulators for mobile testing and as Developer I know is using this version with no problems). I've always install xcode from the app store with no issue so installing from Apple Dev was something new for me so So I did the following downloaded Xcode 26.0.1 Extracted it from Xzip added the extracted Xcode version to the applications folder click the Xcode icon Expected result I was expecting to see text i could install Xcode version Actual Result Xcode opened Asked me to create a project When project was created I saw Question. What did I do wrong? How do I fix it?

I am using official MCP SDK. According to official guide, Servers MUST provide structured results that conform to this schema. https://modelcontextprotocol.io/specification/draft/server/tools#output-schema I could see output schema defined, but result have no structured content. Current output schema: { name: "XcodeListWindows", title: "List Windows", description: "Lists the current Xcode windows and their workspace information", inputSchema: { type: "object", properties: { }, required: [ ], }, outputSchema: { type: "object", properties: { message: { description: "Description of all open Xcode windows", type: "string", }, }, required: [ "message", ], }, } Current response: { "result": { "content": [ { type: "text", text: "{\"message\":\"* tabIdentifier: windowtab1, workspacePath: \\xxx\\n* tabIdentifier: windowtab2, workspacePath: \\xxx\\n\"}", }, ] } } Expected: { "result": { "content": [ { type: "text", text: "{\"message\":\"* tabIdentifier: windowtab1, workspacePath: \\xxx\\n* tabIdentifier: windowtab2, workspacePath: \\xxx\\n\"}", }, ], "structuredContent": { "message": "* tabIdentifier: windowtab1, workspacePath: \\xxx\\n* tabIdentifier: windowtab2, workspacePath: \\xxx\\n", } } }

Looking for any guidance on how to duplicate the Display Settings under "Display & Brightness" more specifically the Display Zoom.

I have made an app using Xcode 26.3 Release Candidate 2 for my Apple Watch that runs successfully on the simulator. Xcode comes with the IoS 26.2 and WatchOS SDK 26.2. However, when I do try to connect to my device that have IoS 26.3 and watchOS 26.3, I see a succesful connection to my iPhone but I see the the world symbol and wheel keeps trying to connect on my Apple Watch. I also tried Xcode 26.4 beta 2 with no luck. I reviewed the WatchOS Release Notes: The watchOS 26.2 SDK provides support to develop watchOS apps for Apple Watch devices running watchOS 26.3. The SDK comes bundled with Xcode 26.2, available from the Mac App Store. I also tried Xcode 26.2 but no luck. Any suggestions?

Hello, I’ve been experiencing a persistent issue in Xcode since version 26.0, and it is still present in 26.2. When using the split view to display two files side by side, the area in the top‑right corner of the window (the inspector / options panel) starts flickering continuously. This happens regardless of whether I’m using the light or dark theme, and even with the Liquid Glass effect disabled in macOS settings. None of these changes have any impact on the issue. I have already submitted a bug report through Xcode (Feedback Assistant), but the issue is still present as of today. The flickering makes the interface difficult to use and visually very distracting. I’ve attached a video to clearly show the issue. I will review the attachment at the time I publish this post. Thanks in advance for any help or feedback. Video 1 https://www.icloud.com/iclouddrive/077l-R7Ybvxz89NI-B7DliEuA#xcode_bug1 Video 2 https://www.icloud.com/iclouddrive/0f6bJp48ioGRdkYiA2U4sI-cg#xcode-bug2

In the first Xcode 16 beta, none of my SwiftUI previews work - they all just crash on start up. Has anybody run into this and found a workaround? Have tried all the usual steps of cleaning the project/restarting Xcode.

In many cases I’ll be talking to folks with a memory management problem and I’ll say “You should investigate this with the standard memory debugging tools.” They then turn around and ask me “What are those tools?” Well, this is what I mean: Zombies — This lets you quickly detect when an object is used after it’s been deallocated. Learn more about it in the Finding zombies section of the Instruments Help and in Investigating crashes for zombie objects. There was also an excellent WWDC video about this, namely, WWDC 2010 Session 311 Advanced Memory Analysis with Instruments. This is no longer available in the video archive but if you can find a copy it’s well worth a watch. Address Sanitizer — This is a lower-level tool that finds a variety of common memory management issues, including use after free and buffer overruns. Learn more about this in Diagnosing memory, thread, and crash issues early and the various articles it links to. There’s also a good discussion of this tool, and other Xcode runtime diagnostic tools, in WWDC 2017 Session 406 Finding Bugs Using Xcode Runtime Tools (also no longer available from Apple). Hardware memory tagging — If you have access to a device with hardware memory tagging — starting with the A19 or M5 processors — consider enabling Memory Integrity Enforcement (MIE). For the details, see Enabling enhanced security for your app or watch Secure your app with Memory Integrity Enforcement. Even if you don’t want to do that for your production app, enable it just for development by checking Hardware Memory Tagging in the Options tab of Xcode’s scheme editor. Older tools — There are a variety of older tools that might be useful in some specific circumstances. See the Enabling the Malloc Debugging Features section of the Memory Usage Performance Guidelines for more information about these. Of specific interest is libgmalloc, which is documented in a UNIX man page. For some practical examples of how to identity a memory management crash report and then investigate that crash with these tools, take a look at WWDC 2018 Session 414 Understanding Crashes and Crash Logs. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History: 2026-03-02 Added a discussion of hardware memory tagging. 2023-05-09 Added a link to Investigating crashes for zombie objects. 2023-03-22 Removed another WWDC session video link. Made minor editorial changes. 2020-10-23 Fixed some formatting errors. 2019-10-30 Removed the link to WWDC 2010 Session 311 Advanced Memory Analysis with Instruments because it’s not long available in the archive. Refreshed all the other links. 2019-01-22 Fixed the link to libgmalloc. 2018-11-02 Updated to include a reference to WWDC 2018 Session 414 Understanding Crashes and Crash Logs. 2017-11-16 First posted.

I am looking to optimize my AI-assisted workflow within Xcode. Previously, my process was inefficient: Manually selecting and copying code snippets from Xcode into Gemini. Asking a specific question (e.g., "Modify this to show an alertError message box"). Copying the result back into Xcode. I attempted to switch to the new native Intelligence feature in Xcode to streamline this, but I found significant shortcomings: Latency: The response time is noticeably slow. Much slower than asking directly on Gemini 3 Pro. Lack of Context: The AI often fails to grasp the full project context. For example, it frequently claims it cannot see the code for ScannerView even though it is part of the project. I often have to prompt it multiple times before it finally "finds" the file. Is Xcode's Intelligence feature actually production-ready yet? If not, what tools do you recommend that integrate well with iOS development? To be clear, I am not looking for "vibe coding." I have a clear grasp of the problem and the high-level solution. My goal is to delegate the low-level implementation to the AI. I need a tool that has full project context from the start, eliminating the need to manually copy-paste snippets into a chat window.

I recently found out that my System Storage is at about 200GB. I checked my XCode and found these "ohter installed platforms" (screenshot1). I can delete them there but as soon as I restart my computer, they will show up again. I found the folder /System/Library/AssetsV2/com_apple_MobileAsset_iOSSimulatorRuntime which uses 75GB and Im pretty sure that these simulators are the ones in XCode. This folder doesnt change a bit when I delete the simulators in Xcode. I cant delete the folder because of permissions... anyone an idea? Btw: 200gb systemdata of 500gb seems pretty miserable. Kind regards

Hello, developers! Xcode 26.3 unlocks the power of agentic coding! Get ready to explore new features that released last Tuesday. If you haven't already, you can download Xcode 26.3 from the Apple Developer Downloads page Check out the official documentation for getting started and how to configure agents in Xcode: ‎ Writing code with intelligence in Xcode Generate code, fix bugs fast, and learn as you go with intelligence built directly into Xcode https://aninterestingwebsite.com/documentation/xcode/writing-code-with-intelligence-in-xcode/ ‎ Setting up coding intelligence Enable third-party coding tools that you want to use in the coding assistant https://aninterestingwebsite.com/documentation/xcode/setting-up-coding-intelligence ‎ Giving external agentic coding tools access to Xcode Let agentic coding tools access your project and Xcode capabilities using the Model Context Protocol https://aninterestingwebsite.com/documentation/xcode/giving-agentic-coding-tools-access-to-xcode ‎ Code-along: Experiment with coding intelligence in Xcode 26 Presented live at a Meet with Apple event: Learn how coding intelligence features can help you write code and fix errors with example prompts and resources. ‎ ‎We are also introducing a new tag to the forums Coding intelligence ✨. Use this tag when discussing these new features to increase visibility on the forums to help others chime in.

I keep getting a fails to open page message when I try to sign in using my Claude ai Pro account. The request was for an http url instead of an https url.